A successful combination of economy and aesthetics is the interior design of the bathroom made of plastic panels. But only in case the right choice material and a competent approach to design.
Plastic panels are excellent for wall and ceiling decoration in wet rooms, moreover, modern manufacturers are paying more and more attention to them. appearance.
PVC panels are not necessarily temporary, budget repair, because with their help you can create a very nice interior with minimal expenditure of energy from financial investments.
Plastic panels: economy or rational choice?
Of course, ceramic tiles are the best option for finishing, but their high cost and complexity installation works do not always make this method available. As far as plastic goes, it can be a worthy alternative. But it is worth considering that not all panels are of the same quality. When choosing a material, pay attention to the number of stiffeners, surface evenness, impact resistance and moisture protection.
Variety of colors of plastic panels
Of course, color is not the last place. The pattern should be uniform. As in the case of ceramic tiles, it is just as important here to purchase material from the same batch and to protect yourself from possible differences in shade.
Panels are indeed a relatively inexpensive way of finishing, but it is not worth saving too much and acquiring obviously low-quality products, because the aesthetics of the room will depend on this first of all.
Advice! In a toilet or bathroom, it is not advisable to mount panels with a relief texture or volumetric pattern. There is a chance that mold and mildew will find the terrain an ideal breeding ground, which is also difficult to clean.
Design features and design ideas
To many, plastic finishing seems to be a cheap, monochromatic and uninteresting option, but one has only to look at the photos of finished bathrooms to make sure that this is not the case. And some techniques and ideas will help you create a very interesting and original interior.
- Plastic goes well with painting or textured plaster. So, for example, narrow matte panels can be installed from the floor to a height of 1.5 meters, and the rest of the wall to the ceiling can be painted in the appropriate shade.
- Alternation will help to diversify the situation. contrasting colors or even panels of different widths.
- A material that imitates the texture of wood can be played well in the right style, for example, ethnic. Along with simple wooden furniture and light cotton curtains in a small flower, they will create a cozy rustic atmosphere. But even with high-quality marbled plastic, the furnishings will look unnatural and cheap.
Use colored panels to create drawings
- Adherents of tile will say that it is impossible to lay out an interesting pattern with borders, friezes or columns from plastic panels and will be fundamentally wrong. In the modern market, you can find a huge number of panels with imitation of ceramic tiles, both monochromatic and with all kinds of patterns and prints.
- On PVC panels, it is possible to apply any pattern using photo printing and it can even be a whole picture located above the bathroom or on an open section of the wall.
- With a plastic finish, a slatted ceiling with regular or mirrored inserts will look great.
Interior style
It would be a mistake to think that only one style can be followed with PVC panels - the budget one. In fact, if you think over the design correctly, you can implement almost any stylistic direction. Of the most simple in execution, the following can be distinguished:
- Minimalism. The main concept of this style is a minimum of furniture, a maximum of space. It features clean lines and discreet shades. Metal and glass elements are desirable in the setting.
Bathroom decoration in the style of minimalism with plastic panels
- Country or country style ideally involves the use of natural materials, but plastic panels imitating wood can create a similar setting and atmosphere. Thoughtfully you will have to approach the rest of the design. Furniture should be simple, the best wooden, perhaps, instead of a door, there will be light curtains, and instead of spotlights–Suitable chandelier.
- Provence is the spirit of simplicity and comfort. Easily workable with PVC panels. The interior is kept in light pastel shades, the furniture is chosen simple, without frills. They complement the furnishings with light floral patterns and porcelain or ceramic décor.
Panel mounting method
There are two ways to mount plastic panels: on the crate or guides and directly to the wall, on glue or self-tapping screws. And here not only the order of work or the requirements for the evenness of the walls differs, but also the amount of area that can be saved. This is especially true for small bathrooms, for example, in Khrushchev houses, where every centimeter counts.
Fastening plastic panels to the crate
Important! If a battery or a heated towel rail is installed in the bathroom, a distance of at least 3-4 cm must be maintained between the heater and the panels.Otherwise, PVC may deform under the action of high temperatures.
In the event that the panels are mounted on a crate, wooden or metal, it is not necessary to level the walls, it is enough to dismantle the old finish and treat the surface with fungicidal compounds, but the finish will take at least 3 cm around the entire perimeter.It would seem a little, but there is now space for a washing machine may not be found.
Installation of plastic panels on glue
Decorating the bathroom with plastic panels: video
Plastic panels in bathroom design: photo
The ceramics on the walls of the bathroom were no longer interesting, even despite the originality of the patterns on the tiles. Painting looks boring and old-fashioned. Recently, there has been an opportunity to refresh the interior sanitary facilities using plastic panels. Despite the relatively low cost, they look quite respectable.
alternative to ceramic finish
Plastic will facilitate renovation work by minimizing wall alignment. This saves time, effort and money. And as a result of the completion of the work - a minimum of construction waste. A lot of positive aspects are collected in one PVC material.
bathroom design features
Plastic panels - alternative bathroom finishes
When decorating a bathroom, difficulties arise immediately, and the internal climate of the room determines them. Not every material is suitable for conditions of high humidity and temperature extremes. Ceramic tiles fit perfectly, which is why they have remained popular for so long.
variety of plastic panels
When it comes to budget, ceramics with their high prices may not be affordable for everyone. In addition, installing it on the walls is laborious and requires great care. Careful leveling of surfaces is necessary. Ultimately, mountains of rubbish are collected, which will also have to spend some effort.
one of the most budget materials
Therefore, the strength and durability of tiles is slowly beginning to yield in positions to PVC products. Despite the lightness of the material, it has a lot of advantages.
- PVC fits perfectly into the conditions of temperature changes and is resistant to moisture.
- The panels are easy and quick to assemble. No special skills are required to work with them.
a worthy finishing option for a wet room
- The lining is quite convenient to care for - it can be easily cleaned.
- At a low cost, the market provides a large selection color solutions and textures.
- The material is safe for human health.
practical and stylish design
When choosing plastic panels, one should pay attention to one important point - the degree of rigidity that the ribs provide, protecting the skin material from mechanical damage. The surface of the panels is chosen flat, without waves and other defects. There should be no unnecessary details on the back.
focus on durable panels
To make the whole room look attractive, you need to carefully match the color shades on the panels. Therefore, it is better to purchase all plastic sheets from one batch. It is also worth paying attention to the correspondence of the sizes.
plastic must be from the same batch
You should not chase too cheap material - this is an indicator Bad quality... PVC panels are already inexpensive compared to other types of finishes, so you only need to buy certified goods that you rarely find on the market. In the desire to make a beautiful bathroom, ensuring the durability of the finish, you need to apply for a purchase at a building materials store.
cheap panels can't be good
Installation and maintenance - highlights
Installation of PVC panels is simple, but still requires attention when performing work. Having made them carefully and competently, you can be sure of the durability of the finish. And a beautiful appearance is also of great importance.
It is not worth starting the installation of panels from the end - first, they study the features of the technical process. And it is necessary to start by letting the lining stand at room temperature for a day or two, so that the material straightens out. Wall cladding will need to be carried out at an air temperature in the bathroom of at least + 10 ° C.
even a beginner in dressing can handle the installation of plastics
Algorithm for performing installation work
On initial stage are engaged in the preparation of the surface of the walls for fastening the panels. The features of this moment will depend on a number of factors:
- when installing the lathing, you can do only by removing the old coating;
- if it is conceived to plant the panels on glue, then you will have to make more efforts to level the surface.
bathroom decoration with panels
Do not forget about such an important point as protecting the walls from fungus and mold. It is necessary to walk on the surfaces with an antibacterial deep penetration primer.
When installing the lathing, you need to use a level so that in the end result the wall decoration looks even.
prepare the walls for finishing in advance
The guides are horizontal and secured evenly on small substrates. You should not choose wooden bars as the material for the lathing - they are susceptible to moisture. Ideal option there will be a plastic profile.
wet rooms require a special approach
The panels are fixed in different directions, but experts recommend choosing vertical - this way the moisture will evaporate better, and the room looks more spacious. The start of the installation should be started from one of the corners of the room, placing the panels joint to joint. If resizing is necessary, a sharp serrated cutting knife should be used.
variety of fastening of plastic panels
In the case of fixing panels with glue, they act according to the principle of wall decoration with wallpaper. An adhesive is applied to the surface area and the plastic sheet is immediately attached. The same is done alternately with the rest of the panels, trying to remove excess glue in time.
Installation is easier and faster if you purchase wider panels. Then there will be less joints on the wall and less waste. For the convenience of fastening, it is recommended to use special clamps.
combined finishing methods
Style solutions
Plastic panels can be called a versatile finishing material, as they organically fit into any interior style - from classic to hi-tech. Some people are stopped by the choice of such a finish because of the fear that the bathroom will look cool. But this is far from the case - with the help of PVC, you can bring warmth and comfort to the interior.
universal finishing material
Do not be afraid that the panels will depersonalize the room - this will not happen. True, the lining does not have such an abundance of patterns and ornaments familiar to ceramic tiles, but a variety of textures and colors helps to make Beautiful design... In addition, the finishing process is facilitated and it costs 2 times cheaper. In case of an unsuccessful selection of shades, the panels can be easily removed and replaced.
easy assembly and disassembly
You can move away from a boring monochromatic interior if you play a little with color. For example, the smooth transition of one tone to another looks interesting, creating the illusion of a wave. The contrast of the alternation of two polar colors will also look original.
don't be afraid to play with color
Among the various shades available on the market, you can choose panels with imitation of marble or wood. They will give the bathroom a chic look, despite the cheap finishes. Even a meager selection of panel patterns can help transform a bathroom into a comfortable space.
imitation wood
Color solutions
Choosing white panels, you can not only give the interior tenderness and freshness, but also visually expand the room.
The steel color of the finish will not look boring or strict if it organically fits into modern style, combined with sanitary devices (toilet, bath, shower) and other design elements.
light shades in bathroom decoration
It will be interesting to look in the bathroom fusion style, when white colors are combined with bright shades.
Delicate blue, as if specially created for bathrooms. Such panels look quite original in combination with cream pastels.
The decoration of the room in dark warm colors looks very stylish.
stylish design of the room for water treatments
Beige and peach colors make the room not only inviting, but also cozy.
On sale you can find other lining colors that will easily fit into the conceived style. You should not give up such a practical and cheap option for decorating a bathroom. After all, this will bring some novelty to the interior.
neutral tones in wall and floor decoration
plastic panels in the bathroom interior
Bathroom decoration with plastic panels is rapidly gaining popularity. Photo, design, renovation, selection and installation features - you need to familiarize yourself with this even before buying materials, so that the whole bathroom is beautiful.
Making repairs in the bathroom, perhaps the most questions will be caused by the material of the wall decoration. It is desirable that it looks beautiful, is practical and inexpensive. And given the constant temperature changes and high humidity levels, it is very difficult to find such a material. Wall decoration should not be damaged in such conditions and be easy to maintain.
Of course, the most popular choice for bathrooms is ceramic tiles. But high-quality tiles are quite expensive, and not everyone can cope with finishing, you will have to hire a master. Are there any alternatives? Of course there is, and one of them is plastic panels. In appearance, they are slightly inferior ceramic tiles and wooden planks, but the installation is quite simple. Also, PVC panels are remarkable in that they have a long service life and an affordable cost.
Choice of panels for decoration
In order for PVC panels to look beautiful and last a very long time, it is necessary to choose the right materials. Today in stores there are many options for panels that differ in color, width, thickness and density of the plastic.
First of all, you need to evaluate the evenness of the panels. There should be no “waves” on the surface of the material, because after using such panels the walls will look ugly and cheap.
An important parameter is the strength of the material, or rather its ability to break when bending, and pierce with sharp objects that are in any bathroom. Usually, panels with dimensions of 2700x250x10 mm are used for finishing the bathroom.
Rules for choosing high-quality panels:
- When choosing, look at the number of stiffeners. The strength of the panels directly depends on their number, therefore, the more ribs, the better;
- The thickness of the material should be at least 1 centimeter, and the thickness of the coating should be from 0.5 millimeter;
- In the store, you need to take the PVC panel in your hands and look at the condition of the stiffeners. If they are deformed, then this indicates that the material is of poor quality, and it was not stored in proper conditions. Such panels will not last long;
- Also carefully examine the color of the panels. If the picture is blurred or the panels of the same color are not monochromatic, then such a finish will not look beautiful, and this does not mean high quality;
- Docking density. You can also check this right in the store by connecting the two panels. If they are of high quality, then the seams will be almost invisible;
- The sizes of finishing materials are usually indicated on the label, but it is better to double-check. If the values do not match, then the reason is either an annoying mistake by the manufacturer, or that they are trying to sell you a fake;
- Before you go to the hardware store, you need to take all the measurements and calculate how many panels you need. If you take too much material, then it will be wasted money, and if too little, then you will have to run to the store again, where there may already be another batch with a slightly different shade.
Varieties
Today the stores have different variants plastic panels that differ in important characteristics:
- Depending on the type of coating, matte and glossy PVC panels are distinguished.
- If we take into account the method of drawing a picture, then there are printed and film options. Film models are produced in this way: first, the required image is applied to a special film, and then glued to the surface of the panels. In the printed version, the image is applied using paints directly onto the plastic.
- Panel joint. There are seam options, in which the design provides for a small joint. On the other hand, seamless panels are tightly connected.
Advantages and disadvantages of panels
Plastic panels are highly durable and reliable. And the properties of the material are said to be the best for special spaces such as bathrooms and toilets.
The advantages of PVC panels include:
- Moisture resistance. The increased level of humidity and splashes of water will not damage the integrity of the structure;
- Fire safety. The material ignites quickly;
- Resistance to different temperatures. After taking a hot bath, the temperature in the room rises significantly, and if this is harmful to some types of finishes, then polyvinyl chloride perfectly tolerates such conditions;
- The service life of the products is at least 20 years;
- Light weight of the panels. The design of this finish is honeycomb, which makes the material lightweight. This means that there will be no problems during transportation and installation;
- Compared to ceramic tiles or wood panels, plastic is much cheaper;
- Various options for finishing the bathroom with plastic panels. Photos of the panels show that PVC materials can significantly improve the design of the room;
- The material is environmentally friendly;
- You can install the panels yourself, there is nothing complicated in this process, so you do not need to call the wizard;
- Easy to care for. To clean the panels, simply wipe them off with a damp cloth.
Polyvinyl chloride panels really have a lot of positive sides, but there are also negative points that are worth mentioning:
- The panels are susceptible to mechanical damage. If there is a blow to the finish, then its surface will quickly become covered with cracks;
- There are interesting design solutions, but the most common panel options look very simple;
- Even though there are many different design options, the panels are not suitable for every interior.
As we can see, the negative aspects of the material are associated in most cases with its low price. If you do not want to spend large sums of money on decorating the walls in the bathroom, then PVC panels will be the best option... The design issue is also not critical, if you choose the right materials, you can create a really beautiful finish.
Plastic cutting tools and features
To install plastic finishing panels, only a few tools are needed, including a construction knife, a hammer, self-tapping screws, wire cutters, a construction stapler and a screwdriver. In addition to these tools, it is advisable to have a pencil and a building level on hand. But if there are no questions with all this, then the process of cutting the panels will still make you think. The fact is that this material is quite fragile.
Panel cutting:
- Experts advise cutting PVC only from the front side. Thus, if a chip is formed, it will remain inside the structure, and the front side will be smooth and intact;
- If the panels are very thin, you can try using a regular knife for cutting. It is only important that it is really sharp;
- To carry out the work, you can buy a special cutter for plastic. But buying such a tool will be justified only if you are going to work a lot with plastic;
- For cutting, you can use a hacksaw with fine and sharp teeth;
- In order not to do everything by hand, some craftsmen use electric tools - a jigsaw or a grinder. But in such a situation, you need to cut the material very carefully.
Preparation for finishing with PVC panels
The main advantage of PVC panels is their ease of installation, everything goes quickly, and for this it is not necessary to call a team of specialists. Panels, which practically do not form seams when connected, will make the walls even without exhausting and expensive putty. Also, plastic structures help to hide behind them all communications of water supply systems, sewage and electrical appliances. If one of the panels is damaged during operation, then it will be easy to replace it. It's also easy to remove the entire trim if you suddenly want a different color or pattern.
It is necessary to prepare for wall decoration with such materials, for this it is enough:
- Clean the surface of the walls from previous repairs;
- Remove foci of fungus and mold, if any;
- Sweep up all the remnants of the trash;
- The last step will be to treat the walls with antiseptic agents.
In general, there is nothing complicated, but problems will begin if worn out old pipes are installed in the bathroom. If you have already taken up the repair of the premises, then you should immediately change the pipes. Experts advise to equip a plastic pipeline, it will be located closer to the wall, thereby saving space, and will also protect the system from leaks. The advantages of plastic pipes also include an affordable price.
Cladding options with plastic panels
Decorating the walls in the bathroom with plastic panels can be done in two ways. The first option is gluing panels directly to the wall, and the second option involves the arrangement of a special frame or lathing made of metal or wood. Each of the options has its positive and negative sides.
Frameless installation
This installation method is rather messy and time-consuming. But this method also has important advantages, in particular - space saving. Yes, the difference will be only a few centimeters, but for bathrooms with a small area, this plays a significant role. And the difficulty with the fact that this method is very long is the need to prepare perfectly flat walls for the panels.
Features of the frameless method:
- When houses were built several decades ago, a lot of sand was added to the plaster. Therefore, it is not difficult to tear off old materials; within an hour of work, you will see brick or concrete panels in front of you. An important factor is the shape of the corners, if they are rounded, then you will have to fix it with a punch.
- If you managed to achieve a flat surface, then it remains to plaster the walls, clean them and treat them with a special primer against fungus and mold. After the wall has dried, you can start finishing.
- If the walls are uneven, then it is necessary to plaster and putty the problem areas, and only after that start repairs in the bathroom with PVC panels. A photo of the process will help to understand in more detail all the features.
- For frameless wall decoration with plastic panels, a special glue is usually used, which is called "liquid nails".
- Next, you need to cut out the panels, and apply "liquid nails" to them in a checkerboard pattern. In this case, you must try so that the glue is not near the edge.
- The material with glue must be pressed tightly to the wall, then tear off, wait 5 minutes, and glue it again. This unusual method of gluing is used when working with liquid nails.
- The first strip must be glued in strict compliance with the level indicators.
- We also do it with the following panels. It is important that the joints are tight and that there are no gaps.
- The first strips and places of corner joints are not mounted anywhere. If you want to install skirting boards, then such connections are not required.
- In general, experts advise installing skirting boards when decorating walls with PVC panels, this will make the structure more durable.
- After the walls, you can start installing the panels on the ceiling.
Frame method
This finishing option does not require perfect leveling of the surface, which can significantly save time. But as already mentioned, the frame takes up a little free space, which is very problematic for small bathrooms. Therefore, it is better to remove the plaster from the walls, treat the surfaces with a special primer, and start installing the frame.
After installing the base, you can start decorating the walls with PVC panels. An important point is the density of the joints and their location, they should be exactly in the center of the fastening strips. Each next panel must be installed in the previous groove, and the connections are masked with special combs, which are at the end of the panel. The corners are set using a corner profile.
In fact, there is nothing complicated, and it is quite simple to sheathe the walls of the bathroom with PVC panels. You just need to prepare a little and study the features of the process.
Design issue
Can PVC paneling in a bathroom look beautiful? Interesting ideas, photos of which are on the Internet, completely destroy the myth that plastic panels look cheap and ugly. If you think over the design correctly, then you can equip the room in almost any interior style. There are at least 3 styles that are simple enough, but look incredibly beautiful:
- Minimalism. To stick to this trend, the bathroom should have the minimum amount of furniture, and the maximum free space. Minimalism is characterized by clear lines and restrained colors. To complement the interior, experts advise using metal and glass elements.
- Country. Of course, for this style, the best material would be natural wood, with which you can recreate the style of a village house. But, the use of plastic panels will be more budgetary, with the help of which the bathroom can also be given a country style. To do this, you need to buy panels that are made under a tree. To create a full-fledged interior, not only wall decoration is important, but also other elements. Bedside tables and cabinets should be simple, preferably made of wood. A medium-sized chandelier is suitable for lighting.
- Provence. This style of interior decoration helps create comfort and simplicity. And plastic panels - great option for registration. This style uses pastel colors and regular furniture, without any bells and whistles. They complement the interior with floral patterns and porcelain or ceramics.
Video
When performing renovation work, the bathroom is one of the most difficult places in the entire apartment. Piping, plumbing, all this costs a lot of money.
To save money and at the same time make the bath practical and cozy, you should look at replacing the standard tiles with plastic panels.
Their installation is not difficult to do on your own, moreover, repairs with the help of plastic panels can be completed in a few days without unnecessary "dirty" work.
Material features
With a height of 2.7 or 3 meters, the plastic panels are rectangular in shape. Outer side simulates various surfaces. It can be wood or fabric, a natural stone or plaster.
Photo printing can be applied to the surface of such panels. The reverse side of the panel is embossed and therefore adheres well to the wall.
But when choosing plastic panels, you should pay attention not only to beauty and a suitable pattern, but also to quality. A good panel has a sheet thickness of 2 mm or more.
The drawing should be bright, not faded and have a uniform shade along the entire length. Another quality that is worth checking is the sufficient rigidity of the panels.
Advantages and disadvantages
As mentioned earlier, plastic panels are affordable. However, this is not the only advantage of plastic panels.
It is very beneficial to use them in new buildings, since they do not deform, even if the house shrinks.
The panels tolerate constant humidity well, are not affected by fungus and are practical to clean. They are easy to assemble. In addition, unsightly communications can be disguised behind plastic panels.
However, plastic panels have some disadvantages as well. Even having a high quality, the plastic of the panels is quite fragile and does not withstand strong impacts, this should be taken into account during installation.
If there is a heat source, battery, boiler or other in the bathroom heating element, then between them and the PVC panels it is necessary to provide a distance of 3-5 cm, otherwise they will be deformed.
Despite the fact that the panels themselves are not susceptible to the influence of fungi, if, during installation, an air space forms between them and the wall, this leads to the appearance of mold. In addition, the environmental friendliness of the panels cannot always be guaranteed.
Plastic panels most often have a glossy surface, so water splashes are visible on them. If you can make an original layout from a tile, then PVC panels most often have a standard pattern.
The biggest creative solution may be to compose panels of different collections into one composition, alternating them. However, if you combine panels with other finishing materials, the situation may improve.
Panel mounting methods
There are several options for installing plastic panels. The first method involves the installation of panels on a pre-installed frame made of metal profiles or other materials leveling all the unevenness of the wall surface.
Installation of panels starts from the farthest corner from the entrance. The first panel should be given to Special attention... The installation of the remaining panels will depend on the correctness of its installation, its verticality.
Fastening the panel to the frame of the lathing can be different, ranging from the most practical - fastening with a self-tapping screw, ending with various adhesives or "liquid nails", and the panels are connected to each other using a padlock method.
At the final stage of the installation of the panels, it is necessary to close the ends with corners or starter panels and coat with sanitary sealant.
With the frame installation method, a huge disadvantage is the reduction in area, especially noticeable in small bathrooms. The walls under the panels require antifungal treatment.
The lathing should be made tight, excluding the formation of dents on the panels. The need to install profiles will entail additional repair costs.
The second way is to install panels on a pre-leveled surface using liquid nails or a special solution.
Thus, no air space is formed between the wall and the panels and, as a result, negative consequences in the form of mold are excluded.
This method does not hide the space of the bathroom, does not allow the panels to deform, however, "dirty" work cannot be avoided. The process of installing panels is similar to laying tiles.