- Color combining options
- Useful advice
- Patchwork equipment in the interior
- The process of patchwork walls of walls
To decorate the walls in all the rules today, various methods can be applied. Casting walls combined wallpaper – excellent option For decoration. Manufacturers offer numerous options for climbing, providing the widest opportunities for finishing. The use of one type of coating today is still applied, but the combination is particularly fashionable recent years, that is, a combination of several webs, differing in texture, color, drawing. Depending on the level natural lighting and square square can be used vertical or horizontal strips, use inserts, patchwork equipment and other options.
What to combine various when you can buy the same
In addition to the aesthetic qualities, the wallpaper is characterized by a variety of surface coatings, which affects the convenience of use and the substrate, which, in turn, affects the method of their laying. Choosing them first, we must decide which interiors will be used, and then on which substrate should be produced. Usually we choose paper or vinyl wallpaper - both types are available in different finishes.
Patchwork equipment in the interior
Paper wallpapers are used in "clean" rooms, where they are not exposed to dirt or, for example, in children's rooms, where they are quickly damaged, but their replacement is simple and cheap. Universal use of vinyl wallpaper with various designs and surface protection. They may have a paper base, but now it becomes more and more fleece, providing greater size stability, easier gluing and deletion when replacing.
Combined wallpapers are the main component of the interior of the room.
The combination coating technique differs little from traditional work, but preparation and cutting will be slightly different. Before starting the activity, it is required to plan the walls of the room, determine which combinations will be used. It is important to take into account what size it is required to cut the material, which amount it will be needed.
Pictures and paintings are also available in stores, as well as many decorative wall paintings. For special applications - Strengthening the surface of the walls and giving them texture - the use of fiberglass wallpaper, glued a little differently than decorative products.
Determination of the required number of wallpaper wallpapers - although apparent easy - can sometimes make it difficult. It may happen that due to bad calculations, the wallpaper will be exhausted by material, and in the store the selected model is already sold out. Pay attention to the production line serial number - all rollers must have the same dimensions if they are placed in one room.
Color combining options
There are many combination options, among them the basic, which are upgraded depending on the interior and features of the decor. Most often apply vertical and horizontal stripes. The first option is well suited when you need to visually increase the height of the ceiling, perform focusing a certain part of the room. Strips can be of different thickness, they may have a contrast color, ornament and drawing, the use of different textures is allowed.
A standard roll has a width of 53 cm and a length of 10 m, but there are other measurements that need to be considered when calculating. The main calculation is to determine the number and length of the bricks needed to cover the walls. Measuring the height of the room, we add about 5 cm, and the wall circle with full height is divided into wallpaper width.
Unusual design: combination and combination
For example, in a room with a height of 260 cm and a circle of 12 m, it will have a length of 265 cm and will require 23 bricks. On one roll, we get 3 full belts, that is, we will buy at least 8 rolls of wallpaper. Other, shorter straps can be used for wallpaper or door jumpers. In addition, we must take into account the distance between repeating patterns, the so-called. The report that causes pruning in certain places. As a result, additional waste is formed, which usually reduce only the length of the balance from the split roll.
Horizontal combination can be used for spacious premises to give them more comfort. This is usually an option when the bottom is drawn up in more dark color, and the upper - in bright colors. In the middle there is a molding or separation strip. The combination of monochromatic strips will look original.
However, in large rooms and with a high reproducibility interval, this may lead to the need for additional rolls and requires consideration when calculating the size of a belt for wallpaper. It depends on the adoption of the so-called. Replace the length of the boulder. We calculate it by dividing the computing height of the room to the wallpaper report. The replacement length will be the number of full reports, large, from the result of separation, that is, after multiplying the report size, we will get the correct length of the block.
In the above example, the reproducibility of the picture will reduce the length of the cut from the roll to 3 shillings and, therefore, does not require additional wallpaper length. As a rule, at least one stock is added to the calculated amount of rolls in case of damage to laying or errors when measuring the surface.
Patchwork technique last years is also popular, with its help you can make any premises, make them brighter, more attractive. It is that the surface is covered in the right or chaotic order elements from wallpaper different color and textures. Inserts and photo wallpapers allow you to give the room the necessary mood, they can be the most different. Wall murals are usually glued to the entire surface of one wall, but can be used in the form of a large insert. They can be replaced by canvas with ornament.
Wallpaper Casting - Fascinating Process
For wall gluing, we will need almost only adhesive glue, which is adapted to the type of attached item. This adhesive will also be used as a primer when diluted with water, if the glue manufacturer does not recommend using another composition. In addition, ready to use glue for gluing edges of wallpaper. To prepare the surface of the wall, it may be necessary to require a wider range of materials. For washing and softening the surface, we use, for example, dishwasher or soap solution.
Back to the category
During the creation of a combined coating, it is necessary to consider that the combination of various wallpapers makes it possible to transform the room, visually make it more and more spacious. Experts advise use such techniques:
In case of damage to plaster, filler is required and, with large losses, such as plaster. To remove dirt from oil, nicotine, resin, we use a gasoline solvent and so on. Dividing paint. With a very plastering plaster, it may be necessary to stretch the surface of the gypsum or glue plates.
For wallpaper, you definitely need a staircase or plaster platform, long scissors or a knife to trim the wallpaper on bricks. For the preparation of glue, a large bucket and a mixer will be required, its use is a wide brush or roller. We will base the basic line with a masonry or long level, and the rolled measuring tape and the pencil will be used for the necessary measurements. To cut the thread and align the glued ribbons, use the wallpaper brush or a plastic bus and a rubber roller with a handle.
- When using various types of wallpapers, a brighter coating must be used for the wall near the bed go sofas. This will allow you to highlight the rest area, visually make the room more comfortable.
- If the decoration of the wall inserts is selected, it is recommended to use molding. It will give the surface finished appearanceThe wall will look more attractive and careful.
- For zoning, you can apply vertical combined bands with contrast colors and drawings that will be used only for one site. This technique is great for living rooms where the separation of the recreation area and the dining area is required.
- If you need to provide space in the room, it is best to apply only bright cold shades. Wall-paper, which are glued only on one wall in this.
- For decoration mirrors, furniture items in the corridors are recommended to use symmetric patterns around them. This technique is suitable for the design of Erkers.
Back to the category
The required cutting of wallpaper is performed using a blade with replaceable blades, led by a steel line or a long spatula with a straight edge. Depending on the work, the tools for laying and plastering will be used, a spiny roller for removing old wallpaper, spatula and power tools for grinding oil paint and smoothing plaster.
The wall can be performed on any construction site if it is rigid and compact. The base should, however, be fairly smooth and smooth, as well as ensure adhesion adhesion. Equality is checked with a long patch applied on the surface in different positions. The horizontal equation is particularly important, since the lower side causes the surface to expand and increases its length, which in turn leads to the dislocation of the contact strips of wallpaper. The gaps under the applied patch should not exceed 2 mm.
Patchwork equipment in the interior
Today, the combination of wallpaper in patchwork technique is popular. This technique is attractive and extraordinary, the room acquires a playful appearance. Start pasting using different pieces is necessary with selection of cloths. If you need to save the children's room for the girl, it is better to take bright tones. For example, 2-3 shades of pink, light blue, white. The main tone will be pink, for combination it is necessary to take 3-4 wallpaper options.
We will define the smoothness of the surface and touch of the hand. From the type of laid wallpaper depends on the required state of the substrate - significant smoothness should be under very thin products, such as wallpaper. Any coating with poor adhesion to the wall, for example, lime, glue is definitely necessary to delete. In doubtful cases, you can perform a tested for adhesion, gluing a piece of wallpaper with recommended glue. After drying and tearing, it should not leave the coated substrate.
If the substrate does not need to be repaired or repairing with superficial damage and previously stained with emulsion paint, it is enough to wash the wall with water and detergent and soil with a solution for wallpaper. We also remove the plinths if you can easily dismantle. Walls covered with cleaning paints or adhesives require scraping all layers to raw plaster and usually smoothing gypsum plaster over the entire surface.
To work will be required:
- Coating with thin floral ornament.
- Wallpaper with vertical and horizontal stripes or winding lines.
- The canvas with images of fabulous characters (it is necessary to focus on the preferences of the child himself).
- One-photon coating of any shade combined with the interior and other types of wallpaper.
It is necessary to start work with the selection of tools and material:
The smooth side should also be a solid plaster under the planned fine wall. If the wallpaper is stacked on the wall, it is enough to pre-dock the surface or pierce with a special barbed shaft and after moisturizing to break. New wallpaper options are removed by stratification - a paper substrate remains on the wall - or completely breaks if they are on the flueze. Shallow coating fragments are restored using a gypsum solution and polished by grinding abrasive paper.
Wallpaper stickers - educational film
Similarly, abrasion requires coating oil paintAnd after grinding it is necessary to check the adhesion of glue to such a substrate. The plates are ideal for covering any type of wallpaper, and the cost of their laying may be less than setting up the old substrate. When preparing work, we ride wallpapers for wallpapers in belts, called bricks, the length of which is a little more than the height of the decorated room. We also need to make sure that the templates are aligned in separate bands, so the distance between them, called both reports, should be taken into account when cutting the strips.
- wallpaper selected type;
- glue for wallpaper;
- capacity for kneading glue;
- drill with a "Construction Mixer" nozzle;
- roller or brush for applying glue;
- simple pencil;
- metal ruler;
- construction level for wall markup;
- a sharp knife with replaceable blades;
- lining material, for example, plywood large sheet, for cutting wallpaper;
- the cardboard from which the template will be cut for the wall pasting elements.
The easiest way to do it is to dry it, laying out the strips next to each other on the floor. For cutting paper wallpapers, we can use a long knife, which we cut when we all put it. In case of vinyl wallpaper You need long scissors or blade with a removable blade, directed along the angle, which will make it easier for the intersection at right angles. On one roll, we get 3 or 4 briquettes, and this amount is enough for one stage of wallpaper.
Glue for the eyelids is usually sold as a powder for dissolving in cold water. We slowly pour it into the measured volume of water and at the same time stirred intensively. After a few minutes and the glue is ready to use again. The ratios of the ingredients and the indicative output of the adhesive are shown on the package.
Casting walls different wallpaper Starts with the calculation and markup of the wall. It is necessary before that it is necessary to carry out the measurements of each wall, after which there is a sketch of the future coating on a sheet of paper. Next, determine which sizes will have each square, for example, 40 * 40 cm. Based on the desired size for one element, it should be broken down on the sketch. Then the numbers are applied on all types of wallpaper. For example, for monophonic squares, a number 1 will be used for coatings with floral ornament - the number 2. It is necessary so that the walls of the walls of the walls of different wallpaper be performed as accurately and quickly in compliance with the accuracy and initial idea.
Before gluing the first wallpaper, we must create a vertical baseline that will ensure the uniform coating of the entire surface. We do it on the wall, perpendicular to the window, at a distance of about 50 cm from the corner. To celebrate the vertical, we will use a long spirit or a straight board, which will serve as a continuation of a short spirit.
You can also use the masonry, in extreme cases, even a string with a load. We clearly draw a vertical line on the wall so that it remains visible after applying glue. Sometimes the walls are not vertical, and when trimming perpendicular wall, the edge of the stack no longer holds the vertical. In this case, we denote a new vertical baseline, and the next set of scales is applied to the corner in the corner, which is then adjusted by two layers or goes over thin wallpaper.
Starting the repair in your home, I want the result to be brilliant! The modern market offers a lot, but the pasting of the walls with different wallpaper remains the leader! The choice of cloths is very large, texture and color can be chosen for every taste.
Unusual design: combination and combination
The design of the room with different wallpaper is not a novelty! During the times, when the rolls were a scarce product and only elected elected in limited quantities could, choose the color also there was no possibility, we were pleased to be any drawing. People gave the remaining rolls to their relatives or neighbors, they added their own - and so and there were forced combined walls!
The use of glue is based on the type of substrate on which wallpaper is made, but the stages of laying are not different from each other. Glue is most convenient for two people. Paper wallpaper must be softened and soaked with glue before applying - glue is applied to the bottom side of the wallpaper and glued only after a while. We cut the belt on the table and evenly distribute it with glue, using a wide brush or roller, keeping it well laid around the edges. Then the wallpaper is folded on 1/4 lengths on both sides - glued inside - not allowing to develop on the place of folding.
Nowadays, it is a different wallpaper of the walls in our time - this is a wondrous designer move. With this move, you can:
- Connect two adjacent rooms.
- Smooth disproportionate length and width.
- Smash the room to the zone.
- Select one wall, give the emphasis to her, give dynamics.
- Visually increase or decrease the room.
- Allocate the recreation area, the scope for the photo frames, to separate the zone behind the fireplace.
The combination is suitable for the room of any size, it can be:
- Kitchen.
- Bedroom.
- Living room.
- Attic.
- Loggia.
- Hall.
Before buying wallpapers, decide with the style, furniture, lighting, decor elements should be harmonized with "clothes" walls! If you find everything in accordance with one topic and color gammaIt turns out a chic room design, original and thoughtful.
Fantasize - each room has its own geometry
Walls play practically main role. You need to choose wallpaper with special care, the combination of wallpaper in the interior is a whole art!
Intersecting strips, ordinary straight or curved plants branches - visually expand the space, will be relevant for pasty premises.
Several pasting methods - interesting ideas
Methods of pasting walls with different wallpaper exist different, it all depends on the size of the room:
Come up with the design yourself, based on your considerations, feel like a designer, then be in the room will be pleasantly doubly.
What wallpaper to choose?
Wall decor in children's
Shops and markets are filled with beautiful rolls of different widths and quality, you can choose in a dead end!
- For the children's room, paper products are suitable, they are made of environmentally friendly materials, will not cause allergies and do not harm the baby's health.
- For the hallway and the kitchen, it is better to choose more dense and necessarily washable wallpaper. For the kitchen you can come up with interesting combinations of monophonic canvases and wallpapers with a picture of juicy fruits or a smoky cup of coffee.
- For the bedroom you can choose any, the main criterion will be color and drawing. Psychologists advise to shit a bedroom with calm, not screaming tones, the entire palette of the Green is ideal - this color is taking calm and pacification. Here it will be most appropriate to pasting walls with different wallpaper.
- Choosing wallpapers for the living room - do not miss! This room is a reflection of the owner. Wallpapers must be luxurious, well-fit full with elements of metal crumb, glitter and chic! Wall-paper works are well suitable for the living room, now there are all: many picturesque landscapes, animal images, attractions of the whole world, bouquets, abstraction. 3D Wallpaper amazing imagination. For an interior in the style of modernity, what is needed!
- For balcony or attic you can stop the choice on low-cost rolls. Actual wallpapers for wood, stone, brick. These premises are usually small, so if you quickly get tired of the drawing, it will not be difficult to cross it. Here you can experiment from the soul. You can play with the light, if there is a niche. Puck the depressions and deepening with darker colors, and the main part of the room is light.
Blowing wallpaper
Wallpaper Casting - Fascinating Process
It is not difficult to make repairs, but on the contrary, it's nice. You can attract all households. One in this case can not cope, you need at least 4 hands. Wallpapers are several species:
- Paper - cost inexpensive, but will not last long, but they can easily and without problems.
- Vinyl is a two-layer miracle, paper below, vinyl top. Hide the defects of plaster and irregularities of walls, very dense wallpaper. The only minus is the complexity of the pasting, only the joint into the joint.
- Fliseline - dense, hardy dense. Lidate in the rating rating Price - Quality!
- Textile.
- Gymelomes.
- Cork.
- Vellar.
- Liquid - nothing needs to glue! Applied with a spatula or sprayer, made from textiles mainly cotton, durable and safe.
Your design is ready, now you can help combine the canvas to friends and loved ones. Everything is extinced and drawn on the leaf, the materials are bought, proceed to the technical part.
Depending on the type of wallpaper, buy glue, but you can use universal. Dense wallpaper glue only the joint into the joint, but the simple paper can be pasted and superimposed on each other. Carefully contact the corners. Shooting the first strip, which enters the angle of 5 to 6 cm, the second start glue from the corner itself. Before starting work, if it is possible to better remove the plinth and sockets, the perfectly smooth surface is more comfortable and faster. Following this simple instruction, you take the wallpaper without difficulty and nerves.
- Prepare the walls, remove the old wallpaper and drive each cm, if there are cracks and irregularities, necessarily align them.
- Take a special plunder or tie the ship to the rope, mark the chalk of the smooth line on which the first strip will be glued.
- Squeeze and cut the stripes, you can cut both types of wallpaper so that you do not return to this stage again.
- On the floor, we roll off the strip, starting from the middle, thoroughly wrapped with glue. We fold the strip in half and wait for 2 minutes. You can smear with glue and the wall for better bonding.
- Gently apply wallpaper to the wall and begin to align over the plumb. Applying the canvas to the wall, a cloth or roller I drive the air, there should be no bubble!
- Do not forget that draft - the enemy of the wallpaper! Close tight all the windows and windows!
Arm yourself with everything necessary, and most importantly with good martial mood! Then everything will work out, as they conceived, and the next day everyone will enjoy the fruits of your work! Boldly embody your ideas. The room with different decor on the walls looks very unusual! It will be the subject of your pride made by your own hands!