New Year Most of us is associated with the smell of tangerines, a nonienneous Salat Olivier and, of course, a dressed green beauty. The aroma of needles is the fragrance of the holiday, which is why natural trees are eliminated in popularity, despite the protests of the defenders of nature. However, despite the loyalty to the traditions, sometimes you want to decorate the house for the holiday completely in a new way, as in the photo from fashion magazines. In this case, the revenue will come original Christmas trees from unusual materials, which can be made independently. In this article we will tell how to make an alternative Christmas tree with your own hands.
For the manufacture of Christmas trees from cones
- pine cones
- cardboard for foundation
- scissors
- flooring or secateur
- universal glue
- gold paint in the can
- sequins
- brush
How to make a Christmas tree of cones
1) The bumps must be carefully cleaned from garbage, rinse and dry.
2) Then neatly a secateur or scissors cut the flakes with the cones as shown in the photo. It is necessary to act very carefully, take care of your fingers.
3) From cardboard Create a cone, connect its edges with glue and fill the base.
4) Gently, bottom-up, start to stick flakes on the cardboard basis. After the entire cone is covered with scales, we leave it for drying.
5) After the gold paint dries, with the help of a tassel, we apply glue to the ends of the "twigs" and cover them with sparkles.
6) Here is such a Christmas tree with us!
By the same technology, whole bumps or any other items can be placed on the cardboard cone: feathers, christmas balls or buttons. That christmas tree It can become an excellent hospital gift for colleagues on work, tired of endless calendars and souvenirs with symbols of the year.
The cardboard cone can be used not only as the basis for the Christmas tree. With it, you can make it possible to make very unusual lace New Year's trees.
For the manufacture of a lace christmas tree will be required
- cardboard
- stationery glue
- scissors
- food film
- large beads
- universal glue
How to make a lace christmas tree
1) Call the cone from the cardboard, connect its edges with glue and overload the base.
2) Wrap a cone with a food film. Watch it to completely cover the cardboard, without leaving the gaps.
3) Protectly wove the stationery clamp and start his spiral to wrap around the cone over the food film. After that, leave until complete drying.
4) After drying, the harness, the melted glue, hardens, and will adopt the necessary form. Carefully pull out the cardboard basis and the food film (if necessary, they can be cut).
5) With the help of universal glue, glue large beads on the surface of the Christmas tree - they will portray New Year's balls. Ready!
In general, for the manufacture of an unusual Christmas tree, you can use almost any remedies. What about the Christmas tree in Japanese style?
For the manufacture of a Christmas tree made of rolls for rolls
- roll sticks
- cardboard Tubus from Paper Towel
- universal glue
- large beads
- cardboard asterisk
How to make a Christmas tree made of rolls for rolls
1) A cardboard tube from a paper towel must be installed vertically.
2) Position wands for sushi in the form of a shala around a cardboard tube, fixing them with glue on top.
3) Now the tube can be pulled out, it is no longer useful. On the top of the Christmas tree put a cardboard asterisk.
4) With the help of universal glue, glue large beads on the surface of the Christmas tree - they will portray New Year's balls. Ready!
If there is very little place in the room, but I still want to create festive moodAlternative Christmas tree can be made with a flat.
For a flat wooden christmas tree will be required
- dry smooth branches of different thickness and size (you can use different breeds of wood, it will be even more beautiful)
- several thin twigs (for the star)
- new Year's garland
- toys for decoration
- universal glue
How to make a flat wooden christmas tree
1) We begin our master class with parsing and sorting branches. They need to be cleaned from bitch and position so that the pyramid is turned out, from the shortest, to the longest. This will be the contour of the Christmas tree.
2) Fix the branches on the wall. From thin twigs makes a wooden star, and put it on the top of the Christmas tree.
3) It remains only to decorate the finished installation toys and new Year's garland. Ready!
Such a flat Christmas tree can be made not only from the twigs, but also from round spins of trees. They will need to be located in the form of a pyramid and consolidate on the wall in any convenient way.
Moreover, the flat Christmas tree can be made almost from any girlfriend: from stickers, garlands or even paper rolled into rolls.
Video on the topic
For more visibility, we suggest to see the following videos, on which there are even more ways to manufacture original Christmas trees.
All ice cream lovers are dedicated to this handicraft for the new year. We will make the Christmas tree from sticks from ice cream with your own hands. Such a craft will be able to make anyone and will not need special skills. This is practically a designer, but with glued parts with each other. Main pick up original colors for coloring and decoration.
The desired material and tools:
1. Standard sticks from ice cream;
2. Wooden base in the form of coils for thread;
3. Adhesive gun;
4. Pliers;
5. Wooden chips;
6. Wood paints;
7. Scissors;
8. Standard brush or soft foam material.
Prepared everything at once to not lose at this time.
Christmas tree of sticks from ice cream
We select the required amount. One for trunk and five for Christmas branches.
With the help of pliers and the side cutter there are shorter. Starting from above, where the shortest, to the bottom of the body of the Christmas tree, where the longest one. But everywhere cut off the rounded edges.
Here is such a craftion from us. It remains only to glue it and decorate.
Soft brushes are missing every wand and let dry.
Paints must be molded easily from hand. But score every Christmas tree in different colors.
On the middle of the blue branch dripping hot glue from the pistol and glit to the vertical trunk.
That's what it turns out if there are small irregularities, it will give only naturalness.
We are smearing the glue on the base of the trunk. And immediately in the coil we do a hole if it is not there.
Insert the barrel into the hole.
From above as decoration we put a thin wooden chips.
Cut the superfluous and even some parts of the chips can be glued to the base for reliability.
With white paint, we leave small points on the branches. We will definitely wait until they are completely dried throughout the hand.
That's what we did. A Christmas tree from the ice cream is ready.
We necessarily glue an asterisk.
It turns out very original decorations for holidays or gifts.
Before new Year holidays 2017 We suggest you try to make the Christmas trees with your own hands from different materials. Photos are presented below and on them you can easily figure out the main concept.
Create such beauty is completely simple. To do this, it is enough to choose the same balls in the color scheme, but preferably different sizes. Touch them to the ceiling, lifting each tier of balls above the previous one. If you move aside and look from afar, the suspension will look like a Christmas tree.
Stepladder instead of ate
The more jewelry from different materials, the better
If you appreciate creativity and a bold approach, which is especially important, relevant for the year of the rooster, then make the christmas tree using the most common stirrer as the main material. If it appearance little scares, then enough to repaint in white color or in suitable color gamut. Balls I. christmas decorations You can hang anything. Connect the garland and such an urbanized tree will delight you and in the evening.
Koreagi and branches
Even twigs can be a Christmas tree
Corygi instead of the Christmas tree will completely come down for the New Year Beauty. Looks very stylish if you pick up decorative branches And decorate them with bright balls. For such a Christmas tree can be used.
Wine plugs
Glue wine plugs for decor
A small decorative christmas tree can be made of wine plugs. For the option, as in the photo on the left, you need to choose the frame-cone of the desired size. It can be made of cardboard. Wine plug cut into two parts and glue the cone flat face. For this principle you need to puncture the entire cone.
Garland on the wall
Wall Christmas tree ropes
Clay decorations on the tape not to damage the wall
When there is christmas decorationsBut there is no living christmas tree, create beauty can be right on the wall. To do this, schematically draw the Christmas tree and attach a garland with toys to her. Looks pretty and with a claim on fashionable design. 😉
Snow-white beauties
Composition from christmas
Such Christmas trees can be made of paper or dense napkins. In your arsenal, a foam should be found as a stand, skewers for mini skewers and paper snowflakes with a picture only around the edge.
It is enough to create three tiers, glue each at the base and place along the stand. It turns out a very tender composition.
From old newspapers
Old magazines and newspapers like twigs of the Christmas tree
The Christmas tree of old newspapers can look very impressive. As the basis, you can use an old pot for flowers or a conventional wooden stand. On a solid basis of the middle diameter, glue the prepared newspaper convolutions. They are made on the principle of sachets for seeds, but pre-and need to be toned with gilding (it can be found in designer shops). The top of the Christmas tree decorate the star.
Nuts and bumps
Christmas Beauty as a craft
Collect acory, shell walnut and bumps. Cover with bronze or gilding. Give the billets dry. While in a small flower pot insert the cardboard cone of the desired size and let it later with the workpieces. It turns out quite a pretty desktop.
Sweet candy
Sweet Christmas tree for children
This Christmas tree will very much want to eat kids, so it will be necessary to glue a cone only in cellophane bags. Small "Christmas Toys" Make from the same candy only round shape and contrasting color.
Panel and old toys
Christmas tree for creativity
If you have an empty wall at which the Christmas tree is asked, then you can make it sticking in cardboard circles. Pick preferably of the same size, so the Christmas tree will look more spectacular, and inward each circle put the decoration. The brighter toys, the more beautiful is your composition.
Red-green ribbons
Christmas strap
The idea is the same - use a steady and strong cone base, sticking ribbons on it. Each row needs to be made contrast. Green and red colors are not chosen by chance, because this is a christmas symbol.
Wooden sticks
Chopsticks as the basis for the Christmas tree
Such wooden sticks can be collected from under the seal. At the conical base, glue as many sticks of different lengths as possible. Lay the rows so that the Christmas tree looks in bulk.
As you can see, there are really many options. The Christmas trees with their own hands from different materials, the photos of which you looked above are suitable in different situations, but only from your creative approach will depend on how the exercise looks in the interior. Create beauty with pleasure! 😉