Mix red with white what color. Getting red in typography. How to get pink

The subtleties of mixing various colors and shades were explained to us in childhood, at school drawing lessons. However, like any other knowledge, the nuances of color mixing are often forgotten and when it is necessary, for example, to change the color of the walls in the house or to get the desired shade from the available ones, many people simply do not know what to do. In this article we will try to figure out how to get green, pink and White color a.

And also tertiary colors, changing the proportions and creating a mixture with a tint halfway between the main color and its secondary. In addition to these rich tones, neutral colors can be made grayish and brownish. To do this, you need to mix any color of the chromatic circle with yours.

Yellow violet Magenta green Blue cyan orange. ... White also cannot be achieved by mixing with pigment colors, because white is the brightest shade in a paint, and never any more mix. dark colors cannot result in a lighter shade.

How to get green

How to get the green color? The answer to this question will be a lesson from the same school course in fine arts. After all, green, as even kids know, is a mixture of yellow and. However, what to do if such mixing is not available due to the absence, for example,. In such cases, when you need to get a green color for painting, for example, walls, you need to take a little ocher, add ordinary white and the same blue pigment. This is how you can get a bright green tint. Detailed, yellow, red, blue and others) you can find on the pages of our website.

White in blends is used to lighten colors and make them pastel. The colors mixed with white become lighter, but they also lose their saturation, they are agrised. Some artists choose to skip black on their palette for personal taste, replace it with very dark colors, or acquire the same meaning mixing other colors.

Black as well dark color with which it mixes also disables it and the soil, so it is recommended to use it in moderation. But don't be afraid to mix black in small amounts to enrich your palette, and you can get, for example, neutral greens when mixed with yellow or brown caramel and tend to fade along with orange and red, respectively.

How to get pink

On the topic of how to get the which can be found on our website, also, we hope, there should be no questions. Pink is the closest relative of red. That is why to get the pink color of paints you need to mix red and white. If you paint with watercolors, in which, as you know, there is no white, then you can simply dilute the red with water. By adding a little blue to this combination, you get a brighter pink, very similar to purple... Pink hair color is also not very difficult to obtain. If you are blonde, then the usual pink dye from the extreme collections will shine on your hair like a poured one. Owners of dark hair must first lighten it. They perceive this color in a certain way and

Wash and darken the color without mixing it with black and white

The wash and darken pigment color has more crumbs than just mixing with black and white. For example, if you want to clarify Orange color without losing color intensity, this can be achieved by mixing it with a brighter shade such as yellow. The result will be orange-yellow. If on the contrary, what is intended is to mask it while maintaining its saturation, can be mixed with magenta or.

Mixing acrylic paints to create new options allows you to produce a uniform color progression in the finished work. Just like shades with a pencil to add depth, include darker and lighter shades of the same color, as well as nettles and crimson add dimension to the shapes on the canvas. You can create darker shades of red by mixing black or another dark color such as blue or green. For a dark red with a slightly soft shade, mix in a dark gray.

A pink shade may be needed not only for drawings, but also in finishing works... Often, this color is absent in the color palette of most manufacturers of paints and varnishes. It's not a problem if you know how to get pink color... To obtain the desired shade, mix the base colors.

Getting pink when working with different paints

First, you need to decide exactly what is pink. The reference shade is the color of the petals Rose Canina - this is a traditional and widespread rosehip almost everywhere. The shade technology used will depend on the type of paint used.

Preparation 1 Use the color wheel to determine the best shade of red to start if you have a choice to choose from. Keep in mind that the step you start with will determine the result after mixing. For example, darkening a reddish hue with an orange hue will be closer to brown than black. 2 Add the red paint you want to start the palette with. It is not necessary to use a large amount of paint, but it is sufficient to keep the mixture of colors. A thin layer of acrylic paint will dry very quickly. 3 With a brush, take a small sample of the beginning tone and paint on the paper. You will use this document to track the progression of shadows and tones as the original color changes. It is also useful as a guide if you need to play the same tone in the future. Add a very small amount of this dark paint over the brush and mix evenly with the red paint. By controlling the amount of dark paint added, you can try as many shades as possible. 2 Take a small sample of the new tone and paint on the paper, alongside the original tone, to match the edges. Take samples of the tones you achieve, darken the painting and add them to the paper. Try to always add the same amount of dark paint to the red you want to darken. 3 Continue adding darker paint until you achieve your desired tone. Use the Tone Sampler to compare the new tone with the original color. You may need to repeat the process with a different darkening color to achieve the tone you want. As you become more proficient in mixing colors and determining the tones you want to achieve, it is not always necessary to create a sample. However, it can be used over and over again as a guide for different projects. The sample chart gives you an idea of how much dark paint to use without having to do the entire mixing process a little at a time. You can add some water to the paint if it starts to dry while mixing. Mix red, green and blue lights to get white light.

To get pink from watercolor, you need to take red and then dilute it with water until the desired shade appears. Depending on the desired saturation, add more or less water.

When gouache is used, the color technology will change slightly. Take red paint and regular whitewash. Then both materials are mixed on the palette - it turns out pink. If you add more red to the resulting mixture, you get a hot pink hue. With more white, the shade will become light pink.

You probably also know that in order to get white light, you have to mix all these three primary colors in the same proportions as in the picture below, right? These experiments led to the fact that it is very interesting and, probably, unexpected requests for many of you.

Now Helmholtz noticed that any other color can be mixed with more than just red, green and blue - each color of light can be mixed equally well with any three other colors! However, there is a condition: these colors must be independent of each other: that is, none of them can arise from mixing the other two. For example, you can mix light colors such as turquoise, pink, and yellow. These three colors of light are independent of each other, and when they are mixed together, they also give off white light.

It must be borne in mind that after drying, the gouache becomes lighter than when wet.

To obtain a pink color when working with oil paints and varnishes, take the paint "kraplak" and add whitewash. Depending on the proportion of the two substances, the pink will be brighter or paler. White is also used when using acrylic paints.

You can also observe the above picture: you can see that the central White spot was created by mixing turquoise, pink and yellow lights. For example: yellow and blue, or turquoise and red. Complementary colors can be recognized when they lie face to face in a circle of flowers. Several combinations of these colors are shown in the following illustration.

Blending additional light colors also produces white light. So why have we always been told, and still say, that three colors are needed, and that these three are only red, green and blue? Helmholtz's discoveries can give us new ideas and new understanding of color theories and their perception by humans, so, in my opinion, we need to take a closer look at them than we have done so far.

Video: mixing colors and getting new ones.

Getting different shades of pink

As it has already become clear, the simplest option that allows you to get pink is a combination of white and red paint. To obtain more saturated shades, the red dye is diluted with water. Then whitewash is added to the diluted red.

Have you ever tried drawing Easter eggs with ingredients already in the kitchen? Even Easter egg coloring is no exception, especially among mothers looking for natural options for their babies. Such methods were known and used by our grandmothers and grandmothers, when there were not so many "envelope" paints, and what they were given was more than enough.

We did some digging and we found there were enough fruits and vegetables to make a natural egg dye, including colors other than red. Nature offers us many solutions, we just need to find them, going back to their origins. Here are eight natural recipes you can paint with Easter eggs.

The characteristics of the result depend on the amount of white. This is true for painting, but you can apply this approach to repair work on painting walls.

Let's see how to make a pink-purple hue. This may be necessary for painting lilacs. To obtain a pink with a purple undertone, cobalt is combined with manganese. You should work as carefully as possible, and combine the substances with drops. If one of the components is in large quantities, then it will be very difficult to fix the error.

How To Get Red: With Red Beet Juice

Boil red beets with 1 tablespoon of salt and 1 tablespoon of vinegar, thus obtaining beet juice. Place boiled eggs into this juice and leave them overnight. Depending on the concentration of juice and color eggshell, you can get shades from light pink to intense red to brown.

How to get yellow: with turmeric

Turmeric ink is made from water, 6 tablespoons of turmeric, 1 tablespoon of salt, and 1 tablespoon of vinegar. Boil for 30 minutes, then lower the eggs and leave for a good few hours to get the dye.

How to get green: with spinach or green grass

Boil spinach or green herb to get dye. Remember to add 1 tablespoon of salt and 1 tablespoon of vinegar. The eggs are already cooked and left in the paint for several hours, even overnight, to get a more intense color.

Pink is obtained by combining raspberry or cherry dye with white. In each of the two cases, the result will be different. Crimson color will give more bright shades, the cherry will be less intense. Lilac is easily obtained by combining blue, white and red.

How to get blue: with red cabbage

Toast large cubes of red cabbage and put them in boiling water, along with 1 tablespoon of salt and 1 tablespoon of vinegar. Boil for 30 minutes until you get dye. Leave eggs in this solution until you get desired color.

How to get purple: with blueberries

You need 1 bag of frozen blueberries that you boil in a liter of water, 1 tablespoon of salt, and 1 tablespoon of vinegar. Leave the eggs in this solution for several hours.

How to get orange: with yellow bulbs or carrots

Boil 6-8 large yellow onions for 30 minutes with 1 tablespoon salt and 1 tablespoon vinegar. Leave the eggs on for a few hours or even overnight. You can do the same with carrots instead of onions.

How to turn brown: with coffee or tea

The procedure is the same as above: the concentrated dye is made from coffee or tea as bright as possible, leaving the eggs overnight.

Peach pink is obtained by counting drops. Take a white base and then, dripping in small drops, add red paint, brown and yellow. The dosage should be very accurate, and it is better to write down the number of drops for yourself. After a droplet of the same color falls into the base, mix the mass and evaluate the result. Brown color should be added very carefully.

How to get brick red: with paprika or chili powder

Make a solution of at least 3 tablespoons of chili powder, simmer for 30 minutes with 1 tablespoon of salt and 1 tablespoon of vinegar, leaving the eggs for several hours or overnight.

How to Get Lavender Color: Red Grapefruit Juice

Another natural paint for painting Easter eggs is red grapefruit juice. Eggs are stored in boiled grapefruit juice for several hours to produce pastel lavender. Remember to add 1 tablespoon of salt and 1 tablespoon of vinegar when making grapefruit juice, these ingredients will speed up the coloring and the color will be better.

After obtaining the desired result, it is checked on white paper, wallpaper or a wall. Dyed and checked in bright light. If the color does not suit, then a correction is carried out - whether it is necessary to add and mix more white.

Tinting of acrylic paints

The disadvantage of self-tinting is the complete absence of the option to repeat the shade needed for work. Sometimes this problem is solved by using a large number of formulations.

How To Get Deep Purple: Red Wine

Did you know you can use red wine to paint an egg? Use it as is or dilute with water, whichever color you want, and leave the eggs in for a few hours. If you have time and experiment, you can mix ingredients in between to see what other colors you can get.

Some tips to get beautiful color

Wash eggs with water and detergent before boiling. Make sure the eggs are kept at room temperature, do not boil them directly from the refrigerator. Use eggs with white bark for pastel colors. Place water and vinegar in any natural scrub; they help speed up the dyeing process and retain color better.

Before getting pink paint, take as a basis the information on the consumption of the mixture from the manufacturer. Each dye has its own specific consumption, and the manufacturer indicates this data. Then the surface area is multiplied by the flow rate and 10% is added to the result.

Experts recommend mixing the dyes in one container. If you work with different containers, then there is a risk of getting different colors even with the most accurate calculations. Therefore, there is no need to risk money and paint, the price for good dyes is quite high.

About mixing paints

Let's look at how to get pink colors from interior paints. For work, prepare a red tinting paste, a suitable container, a construction mixer, brushes. To create pink take white paint and the main red. Red color when mixed in different proportions gives different shades.

It is important that the components of the mixture are from the same manufacturer. Different companies use different technologies and you may not be in the right color.

One more important point- it is not recommended to mix paints and varnishes for walls and ceilings. Manufacturers take into account the characteristics of the surface, which means that the elasticity, wear resistance and soiling of paints are different. When purchasing paints for tinting, be sure to issue a catalog where all shades and proportions are indicated.