Wheel covers are a very popular accessory today. These devices perform a decorative and protective function. They protect the brake system from slush and dirt. Such protection is important during the cold season. At this time, the load on the brakes increases.
Wheel caps are made from various materials. The most commonly used material is plastic. But such material comes in different qualities. Therefore, not all products have high viscosity and elasticity. Accessories with such characteristics resist shock, deformation and cold well.
Caps are also made of metal. Such products are durable and reliable. But it is very difficult to give such material a beautiful and elegant shape. Metal caps rust quickly. This spoils the appearance of the car.
There are rubber products. They adhere perfectly to the wheels, do not break, and also visually reduce the rubber profile and increase the radius of the disc. Metal and rubber caps are very rare.
You may also be interested in material on how to make.
The configuration of the caps is different. It depends on the shape and number of knitting needles. There are also products:
- open. Used for decorative purposes. They allow you to hide disc defects without the risk of brake overheating;
- closed. Well protect brake pads and discs from dirt. They reduce the flow of air to the brake system when driving, which can lead to overheating over long distances.
The shape of the caps is made convex and flat. Products of the first type protrude beyond the plane of the wheel. Therefore, they are easy to lose when driving. But they look impressive. Flat accessories are functional and easy to install.
How to choose the right one
The range of car hubcaps on the market is huge. Therefore, you need to know what to look for when choosing such an accessory.
First you need to decide on the size. If the wheel has a size of 14 inches, then you should choose an accessory marked R14. The dimensions of the cap must be identical to the diameter of the disk. The most popular accessory sizes are from R12 to R16. The holes for installing products must coincide with the grooves on the disk.
When choosing, the design features of wheels and disks are taken into account. If the discs are black and do not have obvious visible defects, then you can buy open-type caps of any pattern. For sports cars, accessories of aggressive design are suitable. For standard cars, it is better to buy classic products.
When choosing a material, you should give preference to plastic. The remaining options have many disadvantages.
You need to know how to choose a reliable plastic model. Hard and hard plastic is fragile. Therefore, it will quickly collapse. Soft products do not adhere well to discs. The ideal solution is medium-hard plastic. You can determine the hardness of the material by lightly pressing the foot of the accessory. If it bends easily, the plastic is soft, and if it is difficult, the plastic is hard.
When choosing auto hubcaps, you need to consider the following points:
- disk status;
- cost of products;
- fastening method;
- material;
- configuration.
The appearance of the caps can be very diverse. The choice of design depends on the individual preferences of the car owner.
How to install to disks
Wheel caps can be installed in several ways. Let's look at each method in more detail.
Using latches
If you purchase an accessory in a company store, then most likely it will be secured with latches. Fastening elements are placed with inside in the amount of 6 - 8 pcs.
First, a spacer ring is placed on the fasteners. Its diameter must coincide with the same parameter of the disk. The spacer ring has an expansion space. It should match the nipple.
The process of installing caps with latches comes down to installing a spacer ring between the inside of the product and the clamping fasteners. Next, the holes are aligned with the nipple. It then takes a little force to press the structure onto the wheel. If everything was done correctly, the expansion ring will take the desired position in the disc groove. As a result, the cap will be firmly fixed to the wheel.
Some car owners use plastic clamps to increase the reliability of this fastening method. How to install them will be described below. Also, special loops and rims can play the role of insurance.
This installation method is considered simple if the product is equipped with at least 6 latches. The stiffness of the locking springs is also important. If it is small, then the fastenings will become loose over time. If the rigidity is high, then the caps will be difficult to remove.
Bolted connection
Fastening with bolts is considered the most reliable. But it is the least convenient in terms of installation and removal of accessories. To install bolt-on hubcaps, you must completely remove the wheel from the car.
There are models that have special grooves on the reverse side. They correspond to the location of the wheel bolts. During installation, the grooves are aligned with the bolt heads and firmly fixed.
On clamps
If none of the above fastening methods are suitable, plastic clamps may be used. They are pulled through the holes in the wheel disk and the cap at the point of fixation. Then the clamps are simply tightened. Installation takes just a few minutes. If you need to remove the accessory, the clamps are simply cut. Therefore, they are considered disposable retainers.
Currently, most car owners prefer to install forged or alloy wheels on their cars. Of course, firstly, it is beautiful, and secondly, forged and cast wheels are lighter, but it is important to remember that not all car owners have enough money for such expensive beauty, since forged and cast wheels are distinguished by their high cost, unlike simple “stampings” . Therefore, to make the wheels more beautiful, car owners find a way out of the situation and simply install caps on stamped wheels. Cheap and beautiful, but this has a significant disadvantage. Wheel covers are often removed "not good people", so car owners are looking for all kinds of ways to protect against theft of these wheel elements. But it is important to remember that there is no way to provide a 100% guarantee against removing the caps, but there are only tips and recommendations that promote and increase the chances of keeping the caps from being removed.
Advice one
The first method is to attach the cap to the stamped disc using a simple cable tie. You can buy them not only in a computer store, but also in a store selling car accessories. Some car owners are skeptical about this method, but in practice, real life This method saved a lot of caps. Since there were cases that “thieves” at night, trying to pull off the cap, without noticing these ties, caused the car alarm to go off. Moreover, such ties, having a certain strength, cannot always be cut without a knife or scissors. It is important to remember that the above method will not only increase the time it takes to dismantle the hubcaps, but will also protect them from accidental removal while the car is moving. Figure 1 shows how you can fasten the cap to the disk with a tie. For reliability, you can use several ties.
Figure No. 1
Tip two
The essence of the second method of protecting the hubcap is the hidden attachment of the hubcap to the wheel rim. It is important to note that in this case the same nylon ties are used. When installing the cap, you must first thread this tie into the hole in the disk and through the holes for fastening the cap. Then snap the cap and tighten the tie all the way through the holes, and then trim the ends. It is important to remember that this method is applicable depending on the design and type of wheel cover. With this method of protecting the cap, thieves will also not be able to quickly remove the cap from the disk and there is a high probability of triggering an alarm. Using this method, you can watch a video from the public domain.
Tip three
The most interesting, but at the same time time-consuming method is painting the cap. The essence of this method is that after purchasing the hubcaps, you need to remove the original paint and paint the hubcaps in the color that is needed and matches the color of the car. The main advantage of this method is that such hubcaps are not in demand on the market of thieves and car owners looking for “free” hubcaps.
Tip four
The fourth method is also used in practice, but is not suitable for everyone. Its essence is that it is necessary to do, as described above in the third method, caps that do not attract interest. Namely, you can paint the registration number of your car or car model on the cap with paint (suitable and not much different from the main color of the cap). This is advice that car owners use in real life. But still, which method to use is up to each car owner to decide individually.
From all of the above, we can conclude that to reduce the percentage of easy removal of hubcaps from a car’s wheel, you can use these methods, but this will not give a 100 percent guarantee. But it will either interfere with the shooting or increase the time of this process.
How to prevent and protect wheel covers from being removed
was last modified: October 15th, 2018 by AdministratorEvery knowledgeable or even novice motorist will say that wheel caps are quite an important and necessary part in every car. And no wonder, because not only the appearance of the wheels themselves and the style of the car as a whole depend on them, but also the direct protection of stamped wheels. Indeed, such “caps” or, as they are also called, “liners” can very successfully hide all existing disc defects, for example, scratches or chips. In addition, with hubcaps your car will acquire a respectable appearance and become more attractive and presentable.
Their protective functions cannot be overestimated, since they serve as good protection for stamped discs from the penetration of dirt and moisture, as well as from rust on the discs. Thanks to this, the rims retain their original appearance for a long time. The caps, among other things, prolong the performance of the braking system and also increase the service life of the wheels themselves.
Most cars are equipped with wheel covers, but sometimes motorists are faced with the problem of the linings quickly wearing out or the difficulty of installing them. In this article we will tell you how to choose the right quality drives and how, following the instructions, install them quickly and easily. Well, let's get started...
1. Selecting wheel caps
So, you entered the car market with a great desire to choose exactly those wheel covers that will suit your car and make its exterior unique. Do not rush to take the first caps you come across, even if they are very solid, think first of all about the quality. There are caps various types, therefore, so that you do not get lost in such diversity, we will try to consider the typology of caps and highlight the most significant disadvantages and advantages of each type.
So, Wheel covers come in two main types: open And closed. They differ from each other in both appearance and functionality. Learn more about each type. As a rule, exposed rims are an excellent decorative detail for a car. At the same time, they also have many functional advantages. During fast driving, they provide fairly good ventilation of the discs and brakes, while being able to prevent severe overheating of the mechanisms. But such caps are not without their drawbacks.
The most significant disadvantage of this type of lining is the fact that they poorly hide even minor external damage or disc defects. Based on this, you should think carefully before you buy this option. If you want not only to purchase a good decoration for your car, but also to rid its appearance of existing shortcomings, you better take a closer look at a different type of disk hubcaps. If you just want to decorate your “swallow”, you can safely buy this option, because, as a rule, it is absolutely suitable for any passenger cars, and especially for sports cars, and will become their “trump card”.
But what about closed hoods? This type of cap has a minimum number of holes and is able to provide disk protection at the maximum level. Moreover, they perfectly protect, as well as other surfaces, from the harmful effects of many external irritants. They can also advantageously hide any other imperfections in the appearance of the disks. One of the rather significant advantages of this type of cap is the ability to conveniently wash and ensure proper care for them. The above-mentioned typology of disc caps was based generally on the functional features of these devices.
Now let's talk directly about the appearance of the wheel covers. Manufacturers offer customers a huge number of different discs with different style frames. Among them are chrome caps, which are the most common. As a rule, they are silver in color and are rightfully considered the most classic version. Such caps can improve the exterior of any car, giving it a prestigious look and elegance.For lovers bold decisions or simply for people in a cheerful mood, you can choose caps of various colors that will not only highlight the color of the car, but also the bright personality of its owner.
Also, designer hubcaps have become very popular today, which are difficult to find on the car market; they need to be ordered. Many creative car enthusiasts order wheel covers with a unique ornament or design. As a rule, the appearance and design of the cap play an important role. The most important thing is not to make a mistake in choosing and purchase a reliable and high-quality product that will suit you as best as possible in terms of its functionality. We will tell you about some tricks thanks to which you can purchase truly high-quality and practical model, which will serve you for many years and will not cause much trouble.
Even if you have already decided on the appearance of the caps, do not rush to buy them. First, pay attention to the type of fastening. As a rule, there are two types of fastenings. IN first the entire body of the cap is equipped with a metal rim on which there are special latches. These latches are used to secure the cap to the disk. This type of fastening can be called quite simple, but in terms of reliability it is not inferior to the second type of fastening, because it is quite durable. In addition to the standard set of latches, such caps also have an additional loop that has the function of “tightening” the diameter of the rim when necessary. All this is done so that the cap can fit more tightly to the disk.
If we talk about second type of fastening, we can say that it differs from the first in the presence of bolts. Bolted fastening involves fastening the disc caps to similar mounting parts as the discs themselves. As practice shows, both options are quite practical and durable fastenings. Although in practice there have also been incidents with hubcaps falling off the mounts while driving high speeds, or during extreme operating conditions of road transport.
Therefore, it is important to say that those motorists who are particularly concerned about the maximum level of protection, as well as the safety of these parts of their car, may consider the option of special additional fastenings for hubcaps.
There are several varieties, but the most popular and popular among buyers are bracket And clamp. The bracket is a special structure made of steel that has holes for bolts. Typically, the bracket is able to provide maximum level insurance of hubcaps for any vehicle. The clamp is made of nylon or plastic material. This device is very convenient, as it locks itself and fits perfectly into any car.
It is also very important to remember that when choosing wheel caps, the material from which the device is made is the most important factor by which you can determine how long a given wheel cap will last you and how quickly it will wear out. Therefore, make sure that the cap is made of durable and resistant material, which should have a decent level of resistance to mechanical damage and external stimuli. Such materials include German or Polish plastic. Also quite durable and resistant are those devices that are made in South Korea or Taiwan.
Also, it would be a sin to forget about the covering of the caps, since one of the main functions of the caps still remains decorative. Therefore, wheel caps should have the most presentable and stylish appearance. To do this, you should pay attention to the color of the disc. Today there are two types of painting: regular surface painting and varnish coating. In the first case, it is important to pay attention to the quality of the paint, make sure that it does not smudge or crumble. The advantage of this coating is its low cost. Regarding varnish coating– it can provide a fairly attractive appearance of the car and, moreover, excellent protection from external damage. The disadvantage of caps with this coating is their fairly high price, so many people prefer standard painting.
Another important factor that needs to be taken into account when purchasing a hubcap for a disc is the radius of the hubcap itself. As a rule, it should match the rim dimensions of your vehicle. The most popular and generally accepted are caps R13, R14, R15. Therefore, be very careful and do not be too lazy to check the dimensions once again.
2. Installing the caps on the disk
After you, following our tips, have selected the hubcaps and wheels for your car, you will encounter another problem - installation difficulties. But “difficulties” is a strong word, because in fact, an experienced motorist knows that installing wheel covers is not so difficult, you just need to follow the instructions. Well, here are a few rules that will help you learn how to install new caps correctly. So let's begin...
Before you begin to actually install the caps, you first need to do a very gentle but thorough cleaning. inner surface disk from dust and mud formations. You should also carefully check the wheel rim for any deformations. If there are any, we eliminate them.
Then you should align the notches for the valve on the cap and the spacer ring. In this case, you need to make sure that the bend on the spacer ring is turned towards the wheel cover. After this, it is very important to secure the spacer ring well into specially designed grooves, which are located on the inside of the wheel cover latches.
After the operations have been completed, you need to attach the wheel cap to the bottom of the rim and, holding it with your knee, you need to carefully insert the remaining fasteners into the rim. Next, we press the two upper latches with our fingers, directly towards the axis of the disk and at the same time press it inside the disk. This must be done by pressing the wheel cap along the entire circumference to the disk. To make this easier, you can support the lower part of the cap with your knee.
It is important to remember that just before installing the hubcaps on the wheels, you need to make sure that their size matches the size of the disk. The rim size can be seen on the tire. If you notice that the cap fits tightly, you need to correct the diameter of the spacer ring by compressing it at the valve location, and if the cap fits loosely, stretch it in the same place.
Finally, it is important to make sure that the cap is well attached to the disc along the entire perimeter of the surface. Depending on the type of fastening, the cap can be installed in several ways, for example, using a bolt connection, latches or thanks to plastic clamps. There are many other methods that came, as they say, “from the people.” For example, many virtuoso motorists “sit” the caps on instant glue, or use hand-made rubber “mushrooms”, which they put on the wheel bolts, and then thread plastic clamps through them to secure the cap.
If you purchased a set of hubcaps at some branded car store, most likely the fastening device will be just the same latches, namely 6, 7 or 8 tabs on the inside, onto which a spacer ring is placed, the diameter of which matches the diameter of the disk. Take a closer look: there should be an expansion space on the spacer ring, which should coincide with the nipple.
If you are a rather scrupulous motorist, for greater reliability you can additionally use clamps made of plastic. It will be enough to simply pull them through the holes in the wheel rim and secure them to the hub spoke. Then the ends of the clamp can be trimmed so that they are not noticeable.
You can remove such a cap quite easily using a screwdriver or the ignition key. You will just need to pick up the expansion ring. While driving, the hubcaps can only get lost when the car is driving on a very bad road, or if a wheel gets caught on a curb. If you purchased hubcaps that are attached with bolts, in order to install such a hubcap, you will have to remove the entire wheel, attach the hubcap to it, and only then screw it together.
There are also models that have grooves on the inside. These grooves fit the wheel bolts. To install these caps, you will need to align these grooves with the bolt heads and press down on the cap until it fits firmly into place. If you find that none of the above fastening methods work for you, as a last resort, you can use plastic clamps. Interestingly, such clamps are used almost everywhere - they are well suited for fixing wiring in boxes or tightening an oil pipe hose.
Using the same principle, you can hook up the hubcaps, although when you want to remove them, you will need to trim them, but in any case, this is a five-minute job. To summarize, we can say that wheel caps are a fairly popular accessory. The material from which the car hubcap is made is elastic plastic, which has a high degree of viscosity.
This material can easily carry low temperatures and does not crack from any impact. As a rule, car hubcaps imitate well-known alloy wheels. If you purchased beautiful and modernized hubcaps, then you will not be able to immediately distinguish them from alloy wheels from a distance. It's practically impossible.
As we have already said, there are a huge number of varieties of disks. But still, they are usually divided into open and closed, flat and convex. As a rule, convex hubcaps are designed so that they extend beyond the plane of the wheel and can be quite easily lost on narrow city streets, while flat hubcaps are easy to install and highly functional.
Well, we hope that when you are faced with the problem of choosing hubcaps for your car, our advice will come in handy. Well, if you decide to install the caps on the wheels yourself, without resorting to special technical centers, following our instructions, you will do it easily and quickly.
Every car enthusiast tries to make his car at least a little individual and stand out from the crowd. There are plenty of options, but perhaps the most simple easy is the installation of wheel caps.
This is what open-type hubcaps look like on wheels
Wheel covers - what's the use of them?
Car wheel covers are designed primarily to improve appearance car.
In addition to the decorative function, these car accessories perform a small protective function. They protect wheel rims from the impact of road surface elements (crushed stone, gravel). The caps also partially prevent the entry of dust and sand, which has a positive effect on the service life of the brake pads.
Another protective function of car hubcaps is that they are located on top of the disc, and in the event of a possible side impact on the wheel in a collision, for example, with a curb, the cap itself will most often be damaged, as well.
Based on this, we can note a number positive qualities wheel covers:
- They decorate the exterior of the car quite well;
- Do not allow dirt and dust to get on the discs and settle on them;
- The caps protect the rims from the impact of stones flying from under the wheels;
- They are the first to absorb a side impact on the wheels, protecting the disc itself from damage;
- The caps have a relatively low cost.
Classification of car hubcaps and their features
All caps offered on the market can be classified according to the following criteria:
Closed metal hoods
- By design, they are divided into open and closed type hoods;
- Depending on the material used, there are metal and plastic caps;
- According to the shape of the profile, flat and convex are produced;
- Based on their external design, there are chrome-plated, colored and decorative caps;
- Depending on the type of fastening, they can be latched or bolted, and additional fastening in the form of clamps or loops can also be used.
Now the most common are wheel caps made of plastic. Previously, caps made of metal were popular, especially in the USA. They still occur today, but much less frequently.
Open hoods have large ventilation holes. Such products provide excellent ventilation of brake pads. They are perfect for rims painted black. But if there are any defects or pockets of corrosion on the disks, then such caps will not be able to hide them.
Closed type hoods are produced either without ventilation holes or with them, but they are small in size. Such caps protect the wheels well from dirt deposits, but do not always provide proper ventilation of the brake pads. In addition, these caps completely hide disc defects. They are easy to clean because they usually have smooth lines without sharp corners, into which dirt can become clogged.
Wheel covers also vary in shape. Some have a smooth outer surface. Such products are adjacent to the disc and practically do not protrude to the side. This is good because the cap may be damaged if the wheel possibly touches the curb. But these hubcaps will not add significant aesthetic value to the car.
There are also caps with a convex outer surface. They give more, but if you park poorly, with the side of the wheel touching the curb, the cap may be damaged.
Each type of car wheel covers has its own advantages and disadvantages, which influence consumer choice. Below are the positive and negative aspects selection for each type:
Part type |
Advantages |
Flaws |
1. Open type hoods |
|
|
2. Closed type hoods |
|
|
3. Metal caps |
|
|
4. Plastic caps |
|
|
5. Chrome caps |
|
|
6. Colored caps |
|
|
7. Decorative caps |
|
|
How to choose wheel covers
Choosing hubcaps for your car is relatively easy. First you need to know what size wheels the car has. If, for example, 14-inch wheels are installed on a car, then the caps should be selected with the designation R14.
Then you should select the caps according design features. If the car's wheels are free of defects, well painted black and the paint is not damaged, you can choose open wheel covers. In addition, open caps have a greater selection of patterns. Open hoods with an aggressive design are well suited for cars decorated in a sporty style. For regular sedans, it is better to choose caps with smooth lines.
Video: Installation of wheel caps
If the discs are not painted black or have defects, then it is better to choose among closed hubcaps.
It is important to pay attention to the material of manufacture when choosing car hubcaps. Very hard plastic will be very fragile and even a slight blow from flying rubble can damage it to the point of destruction. But you shouldn’t choose caps made of very soft plastic. The likelihood of such a cap falling off the disk during movement is very high, since in the case where a non-bolt fastening method is used, the fastening tabs will not have the proper elasticity. Therefore, it is better to choose wheel covers with medium hardness plastic. You can check what kind of plastic the cap is made of by lightly pressing one of the presser feet with your hand. By trying to slightly bend one of the legs, you can easily understand what kind of plastic the cap is made of - hard or soft.
Next, you should select the caps according to their shape. It is advisable to select caps that have a slight convex shape. They will look better, and it will be more difficult to damage them when touching the curb, since they will protrude minimally to the side.
If the choice fell on bolt-on caps, you should check on the car the alignment of the holes in the cap with the holes in the disk.
To do right choice When purchasing wheel covers, you should pay attention to the following points:
- Choose a product that suits your aesthetic tastes.
- The size of the cap must correspond to the diameter of the disk. It is determined in inches and its value is displayed on the tire marking. The most popular and running sizes are R12-R16. It is important that the technological holes and fastening elements coincide with the corresponding parts on the disk.
- Its reliability depends on the type of fastening. A bolted connection is more reliable. However, it requires more time to install and remove. The snap fastening allows for quick and easy installation and removal of the cover. But for her reliable fastening The wheel requires at least six fastening elements around the perimeter of the cap. The more latches, the more secure the fastening will be. To be extra sure, you can purchase additional brackets, clamps and hinges from your accessory retailer. The rigidity of the locking springs and rim must be sufficient to ensure reliable retention of the locks in the closed position.
- The material from which the protective cover is made determines its durability and service life. It must withstand mechanical, temperature and chemical exposure to external conditions. Caps made from German or Polish plastic are of the highest quality. The next positions in the ranking are occupied by products made in Taiwan and South Korea. They have good wear resistance and resistance to aggressive environments.
- It must be borne in mind that convex (inflated) caps look more original and more impressive than flat caps, but they wear out much earlier than them.
Installing and removing wheel covers
After purchasing the hubcaps, you can begin installing them on the wheels. Bolt-on caps will be more difficult to install. Since each of the wheels will have to unscrew the wheel bolts, then press the caps to the disk, replace the bolts and tighten them.
Sequence of installing car wheel covers
Removing such caps is also technologically more difficult, since the removal operation is performed in the reverse order of the installation operation.
It is much easier to install caps that use presser feet. Before installing such wheel covers, the disk should be cleaned of dust. The wire rim of the cap always has a small technological bend for the stingray's nipple. When installing, it is important to ensure that the protrusion is directly against the nipple. Next, the cap is centered on the disk and with light blows along the entire circumference, you can use your fist, the cap sits on the disk. It is important to ensure that the product is completely seated on the disk; there should be no gaps between them. Additionally, you can secure the cap to the disk using plastic tightening clamps. These clamps will prevent the cap from falling off the disk even if the main fastening is loosened. In order not to spoil the aesthetic appearance, it is better to purchase clamps that match the color of the cap.
Removing caps with this type of fastening is also easy. It is enough to grab the ventilation holes with your fingers and jerk the cap towards you. If there is additional fastening with clamps, then they must first be cut.
. #HOW_CORRECTLY_INSTALL_CAPS_ON_WHEELS_with_your_hands. #DIY_CAM Today the topic of our meeting will be the installation of such a useful device as #caps_on_car_wheels. It would seem like a simple element of the exterior, a beautiful piece of plastic, easy to install. But no, and some “lucky” people have probably already been able to verify this from their own experience. It turns out that if the installation of the caps is carried out incorrectly, they, even the highest quality ones, can crack, and the mounting latch may break. And joy after such an incident, of course, will not increase. So how to do everything right? Install #spacer_ring_on_caps. So, let's start with the simplest thing - make sure that the radius of the hubcaps matches the radius of the wheels of yours. Install in hubcaps #spacer_rings.car. After this, we remove the caps one by one from the packaging and install a spacer ring in each. Its function is important - thanks to it, the wheel caps are held very firmly. On some manufacturers' hoods, spacer rings are installed on the conveyor. We will assume that you happened to buy wheel covers without the rings installed. It should be noted that the fact of installed/uninstalled rings does not indicate (in our experience) the quality of the caps themselves. The ring also needs to be installed correctly. Firstly, you need to pay attention that there is a bend on the ring itself. It should be aligned with the nipple valve. On some caps (most often the closed type) there is also a designated place in the plastic itself, which should be aligned with the nipple valve. If there is no such clearly indicated place, then the bend on the ring can be placed opposite any slot in the cap. Now we would like to draw your attention to the next point - the ring is mounted in the cap in such a way that the bend on the ring faces the cap, and in no case vice versa. Installation rules - first we place the valve under the nipple into the hole where we plan to release it, then we move the tab away and insert it and see that the spring is clearly fixed in the groove. Then we continue placing the spring in all the other legs. We would like to draw your attention to the fact that the special support system is carried out on higher quality, factory-made caps, which have proven themselves both in Europe and throughout the world, and are becoming widespread in our countries. After we have installed the spring, we try to see how securely it is fixed, and see if it is in the grooves everywhere. After this, we can proceed to actually installing the wheel covers on the car. #Correct_installation_of_caps_on_wheels. We begin the installation with what has already been mentioned - we combine the bend under the valve with the valve itself and press the cap to the disk in this exact place. Next, one by one, pressing the edge of the cap, insert each latch into the disk. The force should be sufficient to press the latch into the disk, but this must be done carefully so as not to damage the cap. Excessive pressure with your hands may cause it to burst. 0:30 - start #work_on_installing_caps_on_car_wheels ; 0:55 - #tools_and_materials_for_installing_caps on car wheels; 7:00 - #installation_of_caps_on_car_wheels ; 15:20 - #result_of_work_on_installing_caps_on_car_wheels. CHANNEL FOR CREATIVES " #DIY_SAM " : https://www.youtube.com/channel/UCyhV81zcCxhTXurkD6WvEUg This channel was created for those who love life, who love to create. #with_your_hands for independent, purposeful and creative people. The channel's content will consist of videos that will tell you how to do various things with your own hands. Moreover, the videos will concern completely different areas of activity, main criterion - "