A huge selection of shower cabins is presented to the attention of the consumer today, so even a specialist with vast experience does not always manage to figure out a system that is new enough for him. However, if you really want to put a booth in your bathroom, and you are limited in funds, you can install the shower booth yourself, which will save about 25 percent of the cost, although such an undertaking will bring you a lot of trouble, but it's worth it.
To help the newly minted masters, in today's article we will consider one of the real examples of installing a shower stall.
Cabin assembly instructions
Much less problems and difficulties will bring you the installation of an imported product manufactured by some well-known manufacturer, because almost all of them are accompanied by detailed instructions. However, in our difficult time, most people opt for products of domestic or Chinese manufacturers, which have a lower cost of about 400-600 dollars. At the same time, corner cabins are more popular, due to the rather limited space in our apartments.
The designs of shower cabins are standard in their composition and include the following elements:
- back panel and side walls;
- vertical racks;
- sliding doors;
- guides for doors;
- screen or as it is otherwise called apron, skirt;
- upper dome;
- pallet.
In order to install all these elements, it is necessary to prepare consumables and tools:
- electric drill;
- a set of screwdrivers, including slotted and cross;
- construction level;
- a set of wrenches or an adjustable wrench;
- construction pistol;
- silicone sanitary sealant is colorless, where there is no direct contact with water, acrylic sealant can be used;
- fum tape if metal-plastic or plastic pipes are installed, as well as tow if metal pipes are used;
- two flexible hoses for water supply.
It is also necessary to prepare additional nuts, self-tapping screws, washers, a high-quality siphon, a sharp enough knife and gloves before starting work, in which you will assemble the cabin. It is better to do this together, so the help of friends or relatives will not be superfluous.
assembling and installing a shower cabin with your own hands
The first stage consists in the preliminary installation and dismantling of the shower cabin, which must be carried out in a spacious room, no sealant is used. You will need this to better understand the installation process, as well as to make sure that all parts and elements are available, if there are enough fasteners, if there is a need to drill additional holes, and if substandard parts need to be replaced. Having figured out all this, you will be able to handle the work in a small bathroom without too much trouble.
The second stage will be the installation of a shower cabin directly in the place designated for it.
Since the preliminary and main installation of the shower cabin are of a similar nature and contain the same operations, therefore, we will describe the final assembly.
You should start by installing the pallet, while it is going to be somewhat away from the main installation site. It is first necessary to connect the water drainage system using flexible hoses. The outlet to the central sewer is located directly under the drain hole of the pallet.
First of all, the pallet is installed on special legs. For safety reasons, in order not to drive a fiberglass splinter into your hand, you should wear gloves, then take long hairpins and twist them into the seats, being careful. Having tightened the nuts on them and thrown on the washers, in a crosswise way you need to put on the metal supports of the frame of the shower cabin.
Note! A thin layer of styrofoam placed under the frame will help eliminate fiberglass irregularities. And one more thing that should not be forgotten. The metal plate, located on one of the supports, must be placed on the side opposite to the cab pallet, otherwise, distortion is possible.
On a support that has a shorter length, you should find a welded nut, a central leg is attached to it. We do it in the following way. The central leg must be tightened, put on the washer, then put on and tighten the lock nut until it stops, and only after that the nut is tightened, which acts as a stopper when adjusting the leg.
After that, the frame is pulled to the wooden bars, poured into the plastic of the pallet, with the help of self-tapping screws, and then all the fasteners are tightened.
Having carefully placed the legs under the same level, we fix them with the help of lock nuts, while we should not forget to insert fasteners under the screen under the legs.
The next step is to install the bottom valve in the shower tray and install the siphon.
It is very important at the same time to carefully check how tight the connections of the drain device with the shower tray are. Tightly closing the outlet of the drain hose, pour water into the pan. If there is no leak in this system, then we proceed to the next check: is the length of the drain hose sufficient and whether it reaches the outlet to the sewer, and also how correctly the slope angle is observed, which should be 15-20 cm per meter. If the slope angle is insufficient, you can correct this by placing longer supports or simply by building a podium.
next step installation work will be the installation of glass panels and fencing. Having carefully examined the glass, we determine their top and bottom - on the top of the glass it is done large quantity holes. In the same way, you should decide on the guides - the upper guide will be wider, and the lower one will be narrower with curly cutouts. There are special grooves in the guides, into which glass is inserted, the joints of which are pre-lubricated with sealant, after which the screw in the presser foot is carefully tightened.
The guides are connected with the help of self-tapping screws to the rack, at the top and bottom, and a sealant is put on the glass. Sealant is applied to the pallet under the lower guide, and glass is inserted.
The side panels are attached to the pallet with small washers and self-tapping screws, the joints are coated with silicone.
The same screws are attached to the back panel, also using a sealant.
You should not clamp all the screws at once, you need to leave some gaps for adjustment, since the holes do not always match.
After checking the operation of the radio, fan, backlight, we leave the cabin until the sealant hardens.
And after that we proceed to the installation of glass doors. To do this, the lower and upper rollers are fixed, seals are put on and doors are installed so that the doors close tightly, they are adjusted using the upper rollers. It is best to install plastic plugs on those screws that attach the rollers.
Among other things, we fix all the necessary fittings - mirrors, shelves, handles, and then install the cabin in the place intended for it and check its stability. To do this, we stand on the pallet, if it crackles during movement, then the legs are not installed correctly and they need to be adjusted additionally. After that, all communications are connected - electricity, sewerage, hot and cold water.
At the end of the installation of the cabin, it is necessary to check it again for leaks by opening the water and looking through all the pipe connections. That's all, the shower cabin is assembled and installed with your own hands.
Do-it-yourself shower installation. Video
It is not difficult to install a shower cabin for those who strictly follow the instructions and use the advice of manufacturers. As a rule, in this case, special skills are not required, only the ability to work with plumbing tools.
The easiest is to install a shower cabin on your own, one that is sold assembled, but often such models simply do not fit through doors of traditional sizes, so the most common purchase option is a prefabricated structure.
Before proceeding with the assembly steps, we advise you to read the manual for the shower set. It is worth checking whether all the parts and accessories are in place. This is easy to analyze by picking up a production manual and comparing everything. Next, you need to prepare the appropriate tools. You will definitely need:
- screwdriver and screws;
- level and tape measure;
- wrenches and connecting elements;
- sealant and a gun for him.
Installing a simple shower cabin, without additional options, is simple, it is important to make sure that its components are intact.
Cabin assembly instructions
Before the installation of the shower cabin is carried out, evaluate the evenness of the floor in the right place using a level. Remember that some inconsistencies require adjustment, as the surface must be perfectly flat, otherwise this will affect the life of the structure. As a detailed guide on how to install a shower cabin, the video will be a great help.
We collect the pallet
We proceed directly to the assembly of the bottom of the shower cabin. We turn it over and fasten the guide rails into the corresponding holes using self-tapping screws and a screwdriver. Please note that the beams must be screwed strictly in the desired projections, otherwise there is a risk of damaging the integrity of the pallet. Now it is possible to fix the side and central legs with the help of locknuts, all of them need to be adjusted to one plane, that is, to check the level.
We fix the siphon to the pallet, which comes with the cabin, be sure to process the joints with sealant. Here, for reliability, it is better to use an adjustable wrench. Then connect the corrugation, set the bottom in the right place, and lower the flexible tube into the drain, the assembly of the main plumbing elements is completed.
Attention! We recommend positioning the shower enclosure so that its drain is mounted exactly above the outlet of the sewer pipe. This will avoid stagnation and frequent blockage, and water leakage is also excluded in this way. Installing a shower cabin with your own hands is a very painstaking task.
Having installed the prepared structure in the right place, we make sure that it is even, put the level on each straight side, if necessary, correct the position with the legs. This is followed by fastening the pallet to the wall, after which it is imperative to seal all joints. But even here, be vigilant, do not fill the holes designed to drain water from the walls of the shower cabin with silicone.
We are working on installing walls.
When implementing the question of how to install a shower cabin with your own hands, they continue to assemble the metal frame, to place walls and doors in it, it is important to check their evenness and compliance with the length, after which you can start screwing them to the wall into the prepared holes using self-tapping screws. Do not screw the fittings strongly to the base, you may have to adjust the position.
After attaching the frame, be sure to treat it with silicone, this will provide an obstacle to moisture on the walls, which will protect against the formation of dampness and fungus. We install fasteners in which the side walls will be held. All joints must be treated with sealant, rubber seals are required.
Further, when installing the shower cabin with your own hands, we put the doors in the appropriate places, we fix the rollers on which we place the glass doors, having previously installed rubber seals from the kit on them. As a result, handles are placed on the doors. After carrying out all the work, check the tightness and the presence of all installed parts, if everything is in place, you can proceed to fixing the pallet to the wall and installing the screen. When the assembly of the shower cabin with our own hands is completed, we install a faucet with a mixer, a hose and a shower head into the prepared outlets of the pipeline. If necessary, we put shelves and fasten hangers for towels.
When it came to talking about the need to install a shower cabin with your own hands, you should prepare all surfaces for this in advance, check their verticality and horizontality, and most importantly, achieve a strict perpendicularity of the angle where the shower will be mounted. About the details of how to install a shower cabin with your own hands, the video below will tell in more detail.
- Before installing the cabin, it is better to pre-finish the surfaces, otherwise it will be inconvenient in the future, plus the bathing structure may be accidentally damaged.
- If the shower structure has a roof, then it is better to mount it before installing the doors and walls of the structure, the supply of communications will need to be done to the top of the installation.
- It is better to choose a sealant for processing the joints of an installed shower stall based on silicone, it will hold on tighter and well prevent the penetration of moisture.
- If there is a characteristic creak in shower tray while being in it with all the weight - this is a reason to adjust the legs and adjust them in the same plane, and then assemble the shower cabin with your own hands again.
Important! Before starting work on installing a shower cabin, it is important to make sure that all the components are in place. After all, after the start of assembly and use of parts, the material for exchange in the store will not be accepted from you.
You ask - why install a shower cabin with your own hands, if you can call an experienced specialist who will cope with this task within the agreed time frame, and you won’t have to worry and blush for the end result? The answer to the question is simple - a master is a master of his craft, a professional who probably has a scheduled work schedule for the weeks ahead. It is good if the installation of the shower is done for the first time, during the overhaul or directly in the bathroom.
Shower cabin Band Hours Orion without hydromassage
However, do not forget that not everything in our life can be planned, over time it may turn out that the soil in the house has settled, the plumbing has suddenly been damaged, or it was urgent to replace old pipes and sewage systems with new components.
A familiar plumber can find time for you only in a month, and you and your family all this time live in cramped circumstances and inconvenience. Why drag out the rubber when you can learn how to install a shower stall and get started on your own?
What do you need to know?
Shower cabin parts
Before embarking on the installation of a shower cabin, it is necessary to consider its components and take into account all the subtleties and nuances that you may encounter during the installation process.
An ordinary shower without frills includes the following parts:
- pallet, which includes a special base-frame;
- wall and sides;
- doors with fasteners, rollers and all kinds of latches;
- not always - the ceiling surface.
Features of the installation process
The cabin is assembled not in the bathroom, but in any other room that is convenient for assembly in size. First you need to decide whether all the fasteners and parts are enough, and also mark the holes in the right areas. It happens that complete with a shower cabin there are defective components that must be replaced in the store, consider this point in advance.
The glass door for the shower cabin is not only very attractive, but also quite practical. A high-quality shower cabin, even if China is declared by manufacturers, must contain detailed instructions according to the product scheme and another shower room scheme designed to work with electronics. Do not deviate from the technology, repeat step by step all the steps prescribed in the manual.
Shower installation
Making a pallet
The assembly of the cabin, of course, begins with the installation of the frame base - the floor surface, which is called the "pallet". First, you should start connecting the sewage system, the smooth operation of which is ensured by flexible hoses. The hole in the general sewer drains is located under the drain hole located on the pallet. Clean the floor of dirt by wiping it with a soft cloth, and proceed with the installation.
The center leg is fixed on the shortest support by screwing to the end, using fasteners. Be sure to attach the pallet to the paving pieces that are in the fiberglass base and tighten the fasteners well.
The installation of the pallet depends on the presence or absence of a frame Take the building level and check how the horizontality of the legs is maintained, if there are no problems with this, fix them completely. Do not forget to install the fasteners designed for the screen.
It's time to check the tightness of the assembled base and the operation of the drain. To do this, it is enough to temporarily close the outlet of the flexible hose and add liquid directly to the sump. If the floor remains dry and no leaks are found, you should also make sure that the length of the hose is long enough to exit it into the sewer system.
We fix fences and panel components
Installing a shower in the bathroom involves a preliminary acquaintance with the number of glasses intended for the booth, as well as determining their location. Usually there are more holes at the top of the glass, it is this part of the part that is located in the ceiling area of the shower room.
When fixing the guides, be guided by the fact that the upper element is wider, and the lower one has a thin cutout, often in a curly format. Apply a sealant to the joints and seams and carefully place the glass in the areas provided for them. You can connect the guides using self-tapping screws, then fix the seal on the glass panels.
Pay due attention to sufficient sealing of the pallet - the bottom rail must also be treated with sealant. Silicone trim can only be avoided when working with expensive cab models that are equipped with high quality seals by default.
Do not add fasteners to the recesses to drain water from the outside. Attach the sides to the pallet with self-tapping screws; for this, the corresponding holes are already provided in the parts. Spread the joint area again with silicone. Do the same with back wall and joints.
Beginners are often zealous and make mistakes, tightening the screws with force, however, experts advise leaving a small gap for future adjustment. None of the stages of the installation of the shower accepts haste and careless attitude - the material is quite fragile and can break under strong pressure or careless manipulations of the master.
Now you should make sure that the appliances that come with the shower, powered by electricity, are working properly. It can be a fan, radio or luminous elements. If everything is in working order, you can be congratulated - the main stage of the cabin assembly is completed. Finally, you can take a break and leave the shower until the bonding material has hardened.
We install the sashes
Almost every shower stall has shutters so that water does not fall on the bathroom floor when bathing. The sashes are mounted on rollers, which provide a mechanism for their free movement along the plane.
The doors of the box or cabin should move tightly, but smoothly It is better to purchase doors with a pattern or ornament, plain glass parts get dirty easily, dried water stains are clearly visible on them.
Roof work
Installation of the roof begins with fixing a special watering can, equipped with a long flexible hose, radio and fan. Apply sealant to the edges of the radio. According to the instructions, collect accessories, a handle that you can hold on to, as well as all kinds of shelves.
After you managed to put the shower cabin, check the pallet if it is cracking or sagging. If it was not possible to avoid this, adjust the correct installation of the legs, and also mount the screen.
Installation of a shower with an inclined cover
Required Tools
The complexity of the work lies in the fact that you need to make a so-called ladder, which looks like a recess in. You can process the floor only on the first floor of the house, so this shower is not suitable for a city apartment in a high-rise building.
The following tools will help to mount a shower cabin of this type:
- horizontal level used in construction;
- shovel;
- adhesive designed to work with tiles;
- tile;
- putty knife;
- sand;
- gravel;
- waterproofing material.
Walkthrough
Using a shovel, make a recess, after removing the top soil. Place sand and gravel on the ground, which should then be carefully compacted with special devices.
It is enough to lay one layer. Mix tile adhesive with water, the ratio of materials is indicated in the instructions for use. After thorough mixing, apply the mixture with a spatula on the waterproofing layer and proceed with laying. Do not forget to check the horizontal level.
Experts note that the joints and seams between the tiled panels will turn out to be even if special crosses made of plastic are installed between them.
The tile is glued, starting from the fence and ending with a recess designed for draining. It is impossible to lay all the ceramics without cutting, use a glass cutter.
Conclusion
Now you know how to install a shower cabin yourself without the help of outsiders, and you are also aware of the main mistakes that others make during installation. Be careful, approach the process with all the responsibility, and the result will not keep you waiting.
They are especially popular and are increasingly in demand among domestic consumers, so the interest in information about assembling a shower cabin with your own hands is constantly growing.
With the help of the materials presented on this page, you can easily install a shower cabin yourself.
Many are wondering "how much does the installation cost" and are afraid of the high cost. Indeed, the installation of a shower cabin by a specialist in this area will not be cheap, from 4000 r for work. And then in case the country of origin of the cabin is China.
Installation of European plumbing is much more expensive. And looking at it, thoughts arise that it is better not to do this business yourself and save on the price of work. But do not immediately think about it, because assembling a shower cabin is not such a difficult process, and almost every skilled craftsman can install a cabin with his own hands. Photo and video instructions on this page will help you complete the work according to the European standard.
You will also be interested in: - we save half the cost.
What does the shower cabin of the simplest type consist of:
- pallet (has a special frame);
- wall and side panels;
- doors (have rollers and fasteners);
- cab cover, i.e. ceiling panel(depending on configuration).
Before installing the shower cabin, it should be pre-installed in another room if the bathroom is not large enough. And make sure that all the parts are present, that there are enough fasteners, make the necessary holes in the right places, familiarize yourself with the assembly order, and also, if necessary, replace low-quality parts. After dismantling the corner cabin and already assemble it directly in the bathroom itself. When buying, make sure that there is an assembly instruction and a diagram of the device and an electrical diagram for cabins with electronics: some nuances in each of the cabins, especially if they are Chinese, may differ. Try to follow the instructions completely.
Step-by-step instructions for installing shower cabins
Ready-made shower tray
Pallet installation
Do-it-yourself installation of a corner shower cabin begins, of course, with a pallet. But before installing the pallet, it is necessary to connect the water drainage system using flexible hoses. Under the drain hole of the shower tray, there should be an outlet to the main sewer.
After that, we assemble the shower cabin. The pallet must be placed on its feet. We take long hairpins, which we slowly twist into the seats until they stop.
Next, we tighten the nuts on them and throw washers on them, and after that we put on special metal base supports (watch the video). Installation must be carried out according to the assembly diagram and on a flat, pre-cleaned floor.
We choose a support that is shorter than the others and look for a special welded nut on it. It should fix the central leg. Screw it in tightly and clamp it all the way with nuts and washers. After using self-tapping screws, we fix the pallet to the wooden bars located in the fiberglass of the pallet and tighten all the fasteners.
It will be interesting: — Convenience and practicality.
As soon as this work is done, we check the drain at the pallet and its tightness. We block the outlet from the drain hose and pour water into the pan. After making sure that there are no leaks, we check how long the drain hose is, and whether it reaches the outlet to the sewer. If everything is in order, we proceed to the direct assembly of the shower cabin.
Installation of shower cabins with a low tray has no fundamental differences. There is only one exception: in some cases, the construction of a special podium will be required, which makes it possible to lay a sewer to the drain of the pallet.
Installing railings and panels
Before installing in the bathroom, you must carefully inspect all the glass and determine their location. As a rule, there are more holes in the upper part of the glass, which means that this part will be at the top. Let's move on to guides. The upper rail will be wide, and the lower one will have a thin figured cutout, therefore, this is how we place them during installation. After, according to the assembly instructions, you should carefully insert the glass into the specially designated places for the guides, before that, lubricating the joints with sealant.
Do-it-yourself shower cabin assembly for anyone
Next, we connect the guides with the help of self-tapping screws with a special stand and put the seal on the glass. Sealant must be applied to the pan under the lower guide and then install the glass. Silicone processing of joints is important, without it only expensive cabins equipped with reliable seals can be mounted. Self-assembly of a shower cabin is a difficult task, but quite feasible. If possible, ask someone for help (hold, file, etc.) and things will go much easier.
When applying the bonding material with your own hands, you should leave the recesses intended for water drainage untouched. Using self-tapping screws, we attach the side panels to the pallet, for this there are special holes in it. Be sure to process the joints with silicone. After we fix the back panel and also process the joints. Proper sealing is a very important step in assembling a shower stall.
Do not overtighten the screws, be sure to leave a certain gap for additional adjustment. The shower cabin should be installed slowly, carefully, according to the assembly scheme. The metal of the corner shower enclosure is quite fragile.
Next, we check the operation of all necessary electrical devices, such as a radio, a fan, as well as a backlight. After all, to assemble a shower cabin is not only to connect a tray with curtains, it is, first of all, the correct connection of all communications. If everything works, then the main part of the work is done, and you can leave the cabin for a while for the bonding material to completely harden.
Installation of glass shutters
We fix special rollers on the doors and put on seals. After we install the sashes and adjust them with the help of the upper rollers so that they close with the best density. We put plastic plugs on the special screws holding the rollers. These manipulations can be seen in the video below.
Doors for a shower cabin are better to choose with "patterns"
By the way, if you have not yet had time to familiarize yourself with, we recommend that you pay attention to reviews of glass transparent doors. It turns out that they get quite dirty, so we recommend choosing doors with some kind of pattern.
You can see an example of such a pattern on the right in the picture. This pattern will hide water stains and save a lot of your time.
In the classical sense, the assembly of a shower cabin will consist precisely in correct installation flaps to the pallet fixed on the floor. After all, the main convenience of such a booth is blown just by practical glass doors, which allow you not to be afraid of splashes and humidity.
It is the doors that should be given maximum attention, because. the tightness and durability of the shower will depend on the correctness of their assembly.
Cabin roof installation
We fix a shower head with a certain long hose, a speaker, a fan, and a backlight on the corner shower in the bathroom. The edges of the speaker should be smeared with sealant. These works must be carried out carefully following the instructions for collection. Next, you need to mount all the missing fittings: handles, mirror and shelves.
After installing the shower cabin, you should check the pallet for cracking and subsidence. If a creak or other sounds are noticeable, then the legs need to be adjusted: the cost of repairing a burst pallet is high. Next, you should connect to the water supply, sewerage and electricity.
Video instruction for installation and installation
When the self-assembly of the shower enclosure is completed, check again all connections and its tightness, including the tightness of the connection to the water supply. If a leak is detected, fix the problem, and then install the screen on the tray and the shower cabin is ready for use. By the same principle, the cabin is installed in wooden house. If you did everything according to the instruction manual and instructions, following the assembly order, everything should work out.
Calculate the cost of your repair! For free!
By filling out the form and clicking the "Continue" button, our specialists will calculate the approximate cost of the work and, if you need it, they will prompt good specialists.
Calculate the cost of your repair! For free!
By filling out the form and clicking the "Compare Prices" button, our experts will calculate the approximate cost of the work and, if you need it, they will suggest good specialists.
A shower cabin in an apartment, a private house looks not only beautiful and presentable, but also contributes to a comfortable stay. Installing a shower cabin - the instructions for which contain a complete list of work, is not particularly difficult.
The main thing is to have high-quality materials, tools, free time and, of course, desire in stock. In this article we will tell you how to conduct it correctly so that the use of the cabin is reliable and convenient, and also lasts for a long time.
Installation options
Installations of shower cabins differ depending on the type of construction itself, the material of manufacture.
It could be:
- shower cabin with a tray and a regular drain;
- multifunctional box with steam generator;
- simple booths with sloping floors, as a rule, are often mounted in gyms.
On sale there are models, both spacious and small sizes. It is better to choose a booth with a size of at least 80x80 cm, since in it, in the process of taking a shower, you need to bend over, move, raise your hands.
In a free cabin, you will not experience discomfort.
As for the shape of the shower cabin, it can be standard rectangular, square, round or semi-circular.
It is very important when paying attention to the quality of elements made of glass with a thickness of more than 6 mm. Such a cabin is more durable and resistant to impact.
As for the decorative side of the cabin, here you can give preference to your tastes. Since cab models are available with a variety of colors, patterns, frosted or transparent glass.
Installation of shower cubicles involves the installation of equipment, which, in addition to the tray and the fence, includes a faucet with a shower head.
There are cabins with a thermostatic mixer that maintains the optimum temperature when the temperature of the water in the system changes.
When choosing a cabin, it is better to give preference to the design that has two shower heads - manual and cascade.
Installation of a cabin with a sloping floor
Self-installation of a shower cabin can be done with an inclined floor.
In this embodiment, in order to equip a ladder (drain), it is necessary to make a recess in the floor.
In such cases, facing tiles are laid on the floor with a slight slope towards the drain hole. This arrangement of the floor will prevent stagnant wastewater. Then, a cabin fence is mounted on the racks, water is supplied to the mixer.
Attention.
Before laying the facing tiles, before installing the shower cabin, it is necessary to insulate the ceilings from moisture.
Shower cabin functions
Now it is almost rarely used to install a shower cabin in a private house without pallets.
Basically, the consumer installs cabins, which include:
- pallet;
- side walls and rear panel;
- doors;
- top panel;
- other accessories.
Cabins with hydromassage function are very convenient to use.
Installation of shower cabins of this type involves the installation of special nozzles that spray water with a certain intensity.
The massage effect is achieved when the nozzles are automatically turned on with a variable frequency.
The complexity of the cabin system determines the number of nozzles.
Cabins can be equipped with the following features:
- spinal hydromassage;
- lumbar and neck massage;
- lymphatic drainage massage.
Some types of cabins are equipped with a steam function.
The main thing is that proper air circulation occurs, and the steam is evenly distributed throughout the cabin. As a rule, such cabins must be equipped with a fan.
Attention.
The instruction for installing a shower cabin with a hydromassage function provides for a pressure in the plumbing system of more than 2 atm.
It is very important that a water regeneration (purification) system be installed. This will extend the life of plumbing equipment.
Installation Highlights
It is important to know that the installation of shower cabins on your own often occurs with changes in the plumbing system.
The location of the shower cabin can be as follows:
- in the corner of the room;
- attached to the wall.
So that the cabin does not quickly fail, or grooves do not appear, the installation of the shower cabin is carried out independently, taking into account the following points:
- Electricity, water, sewerage are supplied before the installation of the structure;
- The outlet of the cabin sewer must be no higher than 70 mm from the floor to the sewer pipe.
Otherwise, the installation of the shower tray is carried out on the podium; - It is necessary to make installation according to the instructions offered by the manufacturer;
- Sealant is applied to the joints of the parts. Depending on the brand, it can take up to 24 hours to dry.
Attention.
Reliable cabin shower - the installation of which takes place using silicone or acrylic sealant, should be done with the application of silicone with inside cabins, and acrylic - from the outside.
Installation of sewerage and shower tray
The above information may not be enough to understand how to install a shower cabin yourself. Therefore, we offer you a more detailed description.
Installation begins with a drain connection:
- Connect the cab drain hose to the sewer drain;
- Treat the joints with sealants;
- Install a sealing gasket in the drain hole of the pallet;
- Treat the surface of the gasket with silicone sealants. The gasket is installed under the pallet, and the drain assembly is fixed with screws.
The next step in the installation operation is the installation of the pallet and other cabin elements:
Installing the pallet is a fairly easy process. In addition, designs with a pallet have advantages over shower cabins with an inclined floor.
When assembling, there is no need for hygienic and sanitary measures.
Despite the fact that the pallet is easy to install, before installing it, you should seek advice from specialists.
Installation of the enclosing elements of the cabin
Complete installation - shower enclosures assembled together with all elements, including railings and fittings.
When mounting the side panels on the pallet, you should install the guides designed for the cab doors
Between themselves, these elements are connected by standard fasteners using silicone sealant.
Please note that the sealant does not fill the grooves in the pan, designed for better water flow.
For fastening the side walls, sealant and regular hardware are used. The assembly of elements must be carried out relative to each other.
After installing the top panel of the cab (roof), the operation of the electrical equipment of the cab (light, ventilation, radio) is checked.
The structure assembled in this way must stand until the sealant dries. Only then are doors hung. After supplying water to the structure, the tightness of the connections of the cabin elements and the water supply system is checked.
In the absence of any malfunctions or deviations in the operation of the shower cabin, it is necessary to adjust the doors and attach the decorative panel to the cabin (if any).
Attention.
When installing shower cabins in private wooden houses, special attention should be paid to the issue of waterproofing.
We can say that the waterproofing layer must be laid not only on the floor, but also on the walls and ceiling.
Installing a shower cabin in a wooden house on your own is another step towards urban comfort. In addition, a shower cabin is characterized by such qualities as convenience, speed of installation, acceptability for daily use, economy, functionality, egronomy. We hope that the tips and tricks presented in our article will help you cope with this task without any problems. Take a shower with pleasure!