Newfangled trends in the design of a room with wallpaper do not exclude the use of a classic style that involves monochrome decoration. However, in recent years, it is the option of double finishing that has become increasingly common. That allows not only to give the room individuality, but also to solve the issue of zoning. The article will discuss how to glue a room with two types of wallpaper.
Types and combination of wallpapers
Wallpaper is the most common option for decorating walls in apartments and country houses. This is due to a number of reasons:
- simplicity and speed of the process of decorating the room;
- high-quality wallpaper can not be changed for several years after the repair;
- a variety of color palettes and textures of the material.
When choosing compatible options for decor, it is necessary to take into account the qualitative characteristics of various types of material:
- paper. The most common and affordable type of wallpaper. Scope: guest room, bedroom, study or nursery. The service life of such material is about five years. According to the production method, paper wallpapers can be divided into two main groups: simplex (manufacturing technology for a single-layer version) and duplex (improving the quality of the material through the use of a two-layer system);
- vinyl. In the manufacturing process, a paper base is used, on which a special vinyl coating is applied. The finished product has the necessary margin of safety and the ability to stretch. This option is ideal for use in rooms with high humidity - kitchen or bathroom. In addition, the care of such a coating is simplified due to the washing properties. Differ in special durability and color qualities of material. The shelf life can reach about 15 years. And on a properly prepared surface, the joints will be completely invisible. There are only three options for vinyl wallpaper on the building materials market:
- screen printed flat vinyl;
- bulk foamed;
- washable kitchen option;
- non-woven. The most suitable solution for a room located in a newly built building. The reason lies in the residual landing. Wall-paper possess the special durability and elasticity, thanks to a vinyl covering. Therefore, any kind of deformation of the wall surface under the material will not affect its integrity in any way. In addition, non-woven wallpaper is designed for repeated staining. This type of material is ideally combined in vinyl;
- textile. An expensive and stylish premium finish option. Wallpaper, as a rule, has a base of non-woven or paper, and the surface is covered with a fabric (silk, linen, viscose, natural or artificial fibers). The moment that should be taken into account when choosing such wallpaper is the need for additional care. Not all options on sale are moisture resistant. The most successful combination is with non-woven or paper wallpaper;
- velor. During the manufacturing process, various particles of small cross-section are applied to the paper base: fabric or sparkles. The gluing process is quite complicated. The material can be dyed. In the interior, velor wallpapers are best combined with textile or paper wallpapers.
The advantages of combining two types of wallpaper in the interior
There are a number of tasks that are solved when using two types of wallpaper indoors at once:
- artistic design of space;
- practical solutions to problems with design flaws and lighting;
- visual change in the proportions of the room;
- creation of an art object on one or several walls;
- formation of stylistic unity;
- focus on the winning details of the interior;
- compliance with taste and aesthetic preferences.
A wide range of wallpapers on sale allows you to solve the above tasks, thanks to the variety:
- color forms;
- patterns (material with a pattern or for painting);
- textures (smooth, with a 3D pattern, embossed);
- surface quality (matte, imitation of other materials, shiny);
- production material (polymer, natural, fresco plaster, textile);
- pasting method (on glue, self-adhesive version, liquid).
How beautiful to glue the wallpaper of two types
In order to competently combine two types of wallpaper in one room at once, you do not need to have special experience, it is enough to decide on taste preferences and choose a compatible option.
- The trend of double design that has become popular has also affected the building materials market. Currently, a sufficient number of types of wallpapers are produced, similar in texture and color scheme.
- Double finishing is the most common option, which involves solving many problems, among which there is lighting and space division. It is considered successful to choose wallpapers of different types, but from the same collection. So you can not make a mistake with the compatibility of materials and textures.
- In the process of work, wallpaper with a rich shade and a bright pattern is pasted on the most illuminated wall of the room. While walls that receive little light should be decorated with light-colored wallpaper with a small pattern or a plain background.
- In addition to the lighting solution, there is also a need to observe stylistic dynamics. A sharp contrast of textures or patterns can lead to a glut of elements and complicate the interior.
Options for how to stick wallpaper of two types
vertical way
- The most classic way to combine two types of wallpaper in one room. The popularity of this method is associated with the ease of pasting the walls, and the ability to visually raise the height of the ceiling.
- The vertical method involves the alternation of two panels, completely different in color parameters, pattern and surface quality. The basis should be the principle of contrasting or adjacent combination.
Paste wallpaper of two types of photos
- In this case, the combination can take the following options:
- simple style (harmonious addition to the base color);
- complex (a combination of different colors and textures);
- design (use of a non-standard approach in juxtaposing material and colors using contrast).
- The vertical arrangement of wallpaper strips, both symmetrical and asymmetrical with respect to the compositional center, dilutes the monotony of the surface. You can combine monochrome and multi-colored wallpapers, with small and large patterns of similar rapport, with stripes or polka dots.
- With regard to the selected pattern, you can use butt or overlap gluing methods, with an edge cut off with a ladder or wavy.
How to glue wallpaper of two types in a horizontal way
- The horizontal version is designed to divide the wall surface into two equivalent or asymmetrical parts. In the lower region, as a rule, a dark or saturated shade is glued, and light tones are glued in the upper region. This combination creates the effect of panel cladding.
- With this method, you can effectively adjust the ceiling height. A similar effect is achieved by placing a border along the upper edge of the lower strip of wallpaper. In this case, the ceiling visually lowers.
- Note: horizontal wallpaper jointing requires an accurate determination of the pasting level. Otherwise, the docking line will contrast with the level of the furniture.
- It is important to take into account the width of the canvas, as it is directly dependent on the height of the lower part. In addition, the technology of finishing works involves gluing wallpaper from top to bottom, the edge goes with an overlap and is cut off with a construction knife. This is necessary so that after drying, a gap does not form between the strips.
- Another rule for such a combination can be attributed to the following fact: dense, textured wallpaper must be placed at the bottom, while thin and glossy - at the top. This will preserve the integrity of the coating for a long time.
- An alternative design option for the lower part of the wall can be cork, artificial stone or decorative plaster.
- But as a separating material, you can use a border, wooden rail, polyurethane molding or decorative frieze.
Patchwork combination
- It is a combination of horizontal and vertical technique. The result is a unique combination of rectangular fragments of various sizes. At the heart of the process is the idea of a patchwork mosaic, similar to patchwork - patchwork. The decorative feature of such a combination of two types of wallpaper fits perfectly into the interior of the children's room, suitable for the spatial allocation of the dining area in the kitchen space and summer cottages.
- Different fragments of wallpaper with a wide range of patterns, colors and designs are combined into a decorative composition, the finished look of which has a chaotic or ordered look. You can use bright accents or match the wallpaper thanks to smooth transitions. To harmonize the final composition, it is necessary to use neutralizing shades: black, gray or white.
- To perform the work, you will need wallpaper with the same thickness parameters, and a large number of joints involves the use of only paper material.
- Wallpaper inserts. In the decor of the premises, fragmentary wallpapering is also used. Forms can be very diverse from the correct geometric shape to unique patterns. With regards to colors, options with an expressive ornament or pattern, as well as monochrome wallpapers, are also used.
Highlighting one zone with wallpaper
- The priority tasks of this style are the decoration of the walls in the Baroque style or the preparation of paintings for trellis hanging, to give the room a classicist style.
- The use of geometric inserts will bring a touch of neoclassicism to the interior. For a complete look, plank or molding inserts are used, which are an integral part of the composition.
- shelves;
- art pictures;
- family photos;
- lighting fixtures.
If it is necessary to focus the entire space on an interior object of considerable size or functional properties, wallpaper inserts are used that occupy a tangible area, up to the use of the ceiling area.
How can I paste the wallpaper of two widows photo
In each individual room, there are areas that need to be isolated.
- How to paste wallpaper of two types in the hall. In the living room, as a rule, there is a fireplace area, a place for placing a TV, a bar counter or floor lighting fixtures.
- dining room requires separation of the area for placing dishes and a dining table.
- How to paste wallpaper in the bedroom of two types. It most often decorates the area where the head of the bed is placed.
- When pasting with different wallpapers cabinet the working area is allocated.
- How to glue a hallway with two types of wallpaper. Here it is customary to use the horizontal method, when the lower part of the wall is pasted over with darker wallpaper, and the border is separated by a decorative border.
In all variants, there must be a contrast effect, in this case, the insert focuses all attention on the semantic object. In addition, wallpaper inserts help to hide certain wall defects; for this, material with a complex geometric pattern is used.
Wall mural
- Of course, to some extent, photo wallpapers have lost their popularity, however, modern options can become a unique art object in the interior of a bedroom or children's room. Such an insert not only copes with spatial orientation, but is also able to reflect the taste of the owner of an apartment or house.
- The development of digital photography has also significantly affected the number of high-quality photo wallpapers that allow you to create an exclusive version of the interior in a room of any size. To date, this is the most popular way to paste wallpaper in the living room of two types.
Practical wallpaper combination
Not so long ago, any protruding parts of the room, whether it be beam structures, protruding structural parts, supporting columns, niches or bay windows, were related to its shortcomings. To date, such elements are created by designers to embody creative ideas.
With the use of plasterboard structures, the room is filled with complex surfaces, on which a combined finish is subsequently applied.
Combination options that hide the visible imperfections of the room:
- wallpaper having different shades of the same color;
- canvases with a pattern combined with plain ones;
- wallpaper with a pattern that has the opposite background color;
- a combination of contrasting patterns or rapport of various sizes;
- use of jagged lines at the junction.
The main difficulty in decorating ledges and niches lies in the accuracy of cutting the material and the careful processing of the edge. For this, marking devices are used. However, the painstaking work more than pays off with the uniqueness of the self-created design and the perfection of the room.
You can complement the created interior with the help of well-organized lighting, additional accessories and properly selected furniture.
Combination secrets
To get a guaranteed result when combining two types of wallpaper, the following factors should be considered:
- it is worth buying wallpapers produced by one manufacturer;
- it is worth considering not only color preferences, but also compatibility with existing interior items;
- the easiest way is to choose wallpapers that are suitable in style, presented in one collection and similar in price category;
- when choosing material with patterns, one should first of all be guided by the presence of a similar color or its shade;
- the wallpaper chosen as the base must have a neutral tone;
- the vertical version of pasting involves the use of a material with the same thickness;
- to design a border or panels, you need to choose wallpaper with maximum thickness settings;
- when combining a coating made of reed, cork or bamboo with another type of wallpaper, it is worth using natural natural shades.
The process of designing a design combination of several types of wallpaper is associated with the implementation of a creative idea, thanks to which a unique result is achieved: the room acquires its own unique style and visual originality.