It is difficult to imagine a dacha without flowers - on any plot there will always be at least a few flowering bushes. And for real flower lovers, the dacha attracts attention from afar with the abundance of colorful flower beds and flower beds, arches of roses and clematis. Anyone can make flower beds at their dacha with their own hands, and the most ordinary materials will do.
Types of flower beds
Flower beds differ in shape, size, flowering time, and compositional combinations. Most often, the following types of flower beds are used in the country:
It should be noted that vertical, suspended and multi-level compositions require not only constant maintenance, but also high costs. In addition, the process of creating such a flower garden is very labor-intensive. The easiest way is to plant an irregular or monoflower bed, and proper placement and selection of plants will make it spectacular and attractive.
To create original flower beds, many craftsmen use any available materials. These can be old stumps, fallen tree trunks, car ramps, unnecessary plastic barrels, wooden boxes and even real cars that have fallen into disrepair. Borders made of natural stone, glass bottles, and wicker look very beautiful.
In order for the composition to always look bright and fresh, and at the same time be in harmony with the surrounding landscape, you need to carefully select not only the shape of the flower bed and the materials for laying it, but also the plants themselves. Moisture-loving flowers should not be placed in small containers, especially hanging ones, where the soil dries out much faster. For vertical and arched structures, you need to select climbing vines with abundant flowering and a large number of leaves. In multi-level flower beds, you cannot plant tall, dense plants in the foreground, otherwise they will cover everything else.
Prices for pots, flower stands
Pots, flower stands
Laying a simple flower bed
During the work you will need:
- shovel;
- crushed stone;
- stones for borders;
- cement mortar;
- black soil
Step 1. Choosing a location
Choosing a place for a flower garden is the most important stage. A lot depends on what plants will be planted there: some flowers love open, well-lit areas, others prefer shade, others need protection from drafts and wind. Inappropriate conditions reduce the decorativeness of flowers and the flower bed loses its attractiveness.
Step 2. Marking
When a place is chosen, markings of the desired shape are made. It can be a circle, oval, square or rectangle, or any other geometric shape. The perimeter of the flower bed is marked with twine stretched on pegs. If the soil in the area is soft and not overgrown with grass, you can simply outline the contours with a sharp rod.
Step 3. Preparing the pit
Inside the perimeter, use a shovel to select a layer of earth to a depth of 20-30 cm. For drainage, the bottom is laid out with crushed stone, broken brick or stone, leveled well and compacted. If the groundwater in the area is too high, before laying the drainage, the bottom is lined with film or roofing felt, the edges of which are brought out and temporarily reinforced with stones.
Step 4. Decorating the border
Now you need to decorate the walls of the flower bed: using cement mortar, lay a border of stones around the perimeter of the pit. If the area is completely overgrown with grass, dig a shallow trench 15 cm wide around the hole and fill it with small crushed stone or gravel.
Step 5. Planting
When the solution hardens, the flower garden is filled with fertile soil and left for 1-2 weeks. During this time, the soil will compact and settle a little, so you will have to add more black soil. Then all that remains is to plant the flowers and level the soil.
The border can be made not only from stones or bricks; The edging made from bottles buried upside down, from short wooden rods, or from neatly cut planks looks great. If a composition is created from several flower beds at once, the borders should be the same.
If there are old withered trees on the site, they will become an excellent material for small picturesque flower beds. You can use not only trunks, but also stumps, as well as round cuts of thick branches. So, the tree is cut down, leaving a stump with a height of 30 to 70 cm. Using available tools, a recess is knocked out on top of such a size that the flowers can take root well. A through hole is drilled on one side through which excess moisture will drain.
The walls of the stump must remain thick enough, otherwise the tree will begin to collapse faster under the influence of moisture. Another important point: if the cause of the tree’s death was disease, and not old age or exposure to external factors, it cannot be used for a flower garden. The disease can spread to flowers, and all efforts will be in vain. In any case, treating the stump with protective agents will not be superfluous.
The finished stump is filled with fertile soil and left for ten days. When the soil settles, add more, lightly compact and level it. After this, you can start planting plants. When choosing flowers, you should take into account the diameter and height of the stump: on small ones, it is enough to plant a couple of tulip or daffodil bulbs and plant some small perennial, but on stumps with a large diameter, a whole flower arrangement will fit. In stumps with a height of 0.5 m, hanging flowers or low-growing vines look great.
Tree trunks can also be easily used to decorate a summer cottage. The length and diameter of the barrel are not particularly important.
So, the process of making a flower garden from a log has the following order:
- the tree is trimmed on both sides, branches are sawed off;
- if necessary, remove the bark;
- Having retreated 15-20 cm from the edge, make a transverse cut on the trunk with a hacksaw;
- perform the same actions from the other end;
- the wood between the cuts is knocked out to create a container in the form of a trough;
- the bottom is drilled in 2-3 places, the inner walls are treated with an antiseptic;
- fill the inside of the log with soil and compact it a little.
After a few days, the soil needs to be replenished, and after that you can plant flowers.
The flower garden created from old acacia cuttings looks original. To do this, the tree trunk is cut into several pieces 20 cm thick. The bark must be left, it gives the composition a natural look. The middle of the cuts is knocked out, leaving a thin bottom. If you couldn’t do this carefully and the bottom turned out to be broken, you should stuff a piece of plywood or a wide board underneath.
A flower garden is formed: three saw cuts are laid out on a flat, compacted area so that they touch each other closely. Fill them with fertile soil and sprinkle with large wood shavings or wood chips. Another cut is installed on top, placing it exactly in the center of the composition. The top cut is also filled with soil and planting begins. It is important to choose the right flowers here. So that they match each other and do not cover the walls of the flower garden.
Flower garden from an overturned barrel
Such original flower beds are a good solution for hilly areas. Almost any elongated container is suitable for creating a composition. This can be a plastic or wooden barrel, an aluminum can, or buckets of different sizes. Moreover, the container fits even with damage, because only one side remains visible.
Select a suitable elevation and lightly excavate its top. Place the barrel or bucket on its side and dig in well so that the container does not move. Inside, the bottom is lined with mulch film and soil is poured. The slope located at the opening of the barrel is carefully loosened, cleared of weeds and also sprinkled with flower soil. When the ground settles, low-growing flowers can be planted.
To create the effect of a spreading puddle, it is recommended to plant creeping and hanging plants with white or blue flowers. For example, if you use an aluminum can and white daisies, it looks as if milk is pouring out of a fallen can and turning into flowers.
Petunias look beautiful in such a flower garden, as well as multi-colored violets and small carnations. You can use an old unnecessary wheelbarrow: it is placed on one side of the hill, tilted slightly so that the lower edge rests on the top, and strengthened with improvised means. Then they fill the wheelbarrow with earth, and at the same time prepare the soil on the mound. Plants are planted over the entire surface of the elevation and in the wheelbarrow itself; it is better to use bright and colorful flowers.
Video - DIY flower beds at the dacha
With the onset of spring, not only nature awakens, but also summer residents, owners of country houses and their own houses have an irresistible desire to decorate their properties, create an atmosphere of beauty and comfort in them. After a noisy, dusty city with a polluted atmosphere, it’s good to find yourself on a forest island, inhale a sweet floral aroma, lie on a soft green carpet, plunge into the transparent blue of a swimming pool, and watch the sunrise in a gazebo entwined with strange plants and flowers. This is how the workdays of millions of owners of pieces of nature begin. You can, of course, order from a landscape designer to have your site magically transformed. However, this service is very expensive and not everyone can afford it, and making flower beds in the country with your own hands is much more pleasant.
Do-it-yourself flowerbeds in the country
The most spectacular, eye-catching, attention-grabbing thing is flowers. Any form of flower beds looks beautiful, but if there is little space left for these ornamental plants, then using your imagination and coming up with a non-standard solution to this issue can be done easily and simply, the main thing would be the desire.
The flowerbed should be located in a place where there will be enough lighting for it, unless, of course, shade-loving plants grow in it. Therefore, you should not plant a flower bed or flower garden in shady places, but it is even better to place them near the recreation area, at the front entrance, or where free access will be provided to them. The paths leading to flower beds and flower beds can be laid out beautifully, or simply covered with red tennisite.
Decoration of flower beds
Do-it-yourself built-in flower beds at the dacha. There is no need for a specially designated place for them, and any one will do. Flowers will brighten up the dullness of gray, ennoble, and emphasize the airiness of glass. This option will help to divide into, eliminating the need to remove flowerpots and pots from the room every spring.
It can be designed in the form of rising terraces, carefully considering the placement of planting material in them. Flower beds built into benches are practical, look impressive, and provide aesthetic pleasure.
Flower beds made from car tires
The creative fantasies of gardeners in the design of flower beds and flower beds should not be limited by anything. Any items available on the farm can be used. It could be anything: old car tires, buckets, pots.
In a word, everything where you can pour soil. To give these items even more beauty and elegance, they can be painted bright.
Colored flower beds made from car tires -
a great attempt to add bright colors to gray everyday life
DIY vertical flower beds
For example, hollow bricks must be glued together to form a cabinet from which all the drawers are pulled out. Fill the cavity with soil and sow the seeds of your favorite flowers. When forming flower beds, you need to remember about drainage holes so that the water does not stagnate and the plants do not die.
Vertical flowerbed for petunia- a brilliant solution not only as an original decoration for your garden. This will also save you a lot of usable space, which you will always find something to use for.
Making vertical flower beds at the dacha with your own hands from scrap materials is fun and exciting; they look special, beautiful and impressive. Each site becomes unique in its own way, acquiring its own individual charm and charm.
As you can see, absolutely everything can be useful on the farm - this photo is a clear confirmation of that.
Do-it-yourself flowerbed umbrella
An old factory umbrella or one made from plywood with your own hands is suitable for this. The sharp part of it is stuck into the ground 10 cm, strengthened with wooden pegs for stability, the bottom is lined with small pebbles, then fertile soil is covered.
The handle of the umbrella can be painted in different colors to harmonize with the plants blooming here. Bright marigolds, colorful asters, and drought-resistant salvias will look beautiful.
Ordinary garden design has not brought proper joy to the eyes for a long time. Every housewife strives to decorate her garden, to make it special and unique, but not everyone succeeds, and often the result does not live up to expectations. How to choose and arrange flowers in the garden correctly is a pressing question for many gardeners.
First of all, you need to choose a color scheme that doesn’t hurt your eyes and blends into a colorful palette. I think the most common colors are red, blue and yellow. They are generally called shades of purity, since they are obtained without mixing the main colors of nature.
Of particular relevance are colors such as purple, light green, orange; they are obtained precisely as a result of mixing primary colors. Turquoise, blue, blue are cool shades.
Black and white, polar shades, can be combined with any color. Thus, using a wide range of colors, you can create a unique palette in the garden.
Before decorating the garden, you must first decide on the main color and the transition of tones. Having chosen a base color, you should not plant similar colors next to each other, otherwise the garden will look dull and dull.
It is better to occupy the main area with bright colors, thereby placing emphasis on the main spectrum of the palette. If the foreground looks quite bright, then it is better to make the background more neutral; green shades, calm and harmonious, are suitable for this. The more greenery in the landscape, the higher the degree of harmony.
Having chosen the colors and decided on the plants, you need to correctly arrange the flower beds in the dacha with your own hands. Here you should use your imagination, not forgetting to adhere to the color scheme. It is also worth remembering that the flower bed should be well, but if, of course, these are not shady plants, flower beds with such plants are best placed under trees.
It would not be a bad idea to place a flowerbed near the entrance to the site or next to another building, thereby improving the buildings. For the exact location of the flower beds, it is worth drawing a sketch of your garden, so you can predict the end result.
The biggest mistake when decorating a garden is going overboard, both in colors and in the arrangement of flowers. You shouldn’t take up all the free space with flowering plants.
A small artificial stream and garden figures will look original; this will add some zest to your garden. Those made in the shape of an artist’s palette, from bottles, from old shoes and even from an old toilet look unusual. It is important what you like and fits organically into.
There are a lot of options, colors and arrangement of flower beds in the garden, as they say, who knows what. But it is still worth following the basic principles.
Decorate your garden correctly, maintain a balance of natural colors, because there are a lot of ideas for creating flower beds.
Do you want to decorate your property with original garden beds, but don’t know where to get ideas from? Here you will find the best examples of flower arrangements that will transform your garden in a matter of moments! We will tell you how to make a beautiful flowerbed with your own hands, give examples and several master classes with photos.
A flowerbed made by yourself is one of the best ways to decorate a site, add originality and expressiveness to it. A beautiful flower bed will become the most attractive corner of your yard and, perhaps, even a kind of connecting link that unites the house, garden, plants and outbuildings into a single harmonious composition. You can use absolutely any materials, even the most unusual ones, to make flower beds.
Regardless of the attractiveness of the flowers, a flowerbed that does not have a fence will look unfinished. The fenced flowerbed will immediately be transformed and become more neat. Such fences, by the way, are necessary not only to mark boundaries, but also for many other purposes - for example, they prevent the spread of plants (especially ground cover) throughout the area. In addition, the sides protect fragile shoots from pets walking around the site.
Of course, today ready-made forms and fences for flower beds are sold, made of wood, stone, plastic and even metal, but after construction/repair work there are always excess building materials, pipe cuttings, wood, pieces of bricks - in a word, everything that you want Can be used to make lovely flower beds. For example, the remains of linoleum or metal tiles can serve as fencing.
Polyethylene containers are a real problem for a responsible summer resident. The solution may be to use plastic bottles to create flower beds. This solution is recommended for areas where there are a lot of moles - the bottles from which the flower fence is made will become a serious obstacle for pests. You can even alternate bottles of different colors to make the arrangement look more colorful.
Note! Before digging, it is advisable to fill the bottles with sand or soil - this way they will not be deformed and will become more stable.
New life for old things - we use improvised means!
People often transport unnecessary things to their dacha. Various chests, boxes, chairs, shoes and clothes - all of this is living out its last days here, to finally dry out or burn in the fire. But you can also make beautiful and original flower beds from old things!
Some flowers spend the winter in the apartment, and are transported to the site only in the summer. But they don't have to be planted in the ground - you can leave them directly in the box, and then, when autumn comes, move them back into the house.
Boxes can also be used to create vertical flower beds. These conditions are ideal for hanging crops and succulents. You can hang such structures on a wall, fence or other vertical surface.
If you have drawers from old chests of drawers or bedside tables lying around, don’t rush to send them to the landfill - instead, use them to organize a compact flower bed. The color and shape of the boxes may vary, as well as the overall style. But they will all be harmoniously combined with colors.
Sometimes even seemingly useless things like old shoes can find a new life. You can plant flowers there, and then hang your shoes somewhere (even by the laces). Moreover, the older the shoes, the better - there will certainly be no stagnation of water in shoes with holes.
Another option for creating an original flower bed is to use an old iron cage. Plant climbing crops in it and hang it on a tree or inside a gazebo.
Very unusual flower beds are also made from glass wine bottles. This is guaranteed to surprise your guests! But be careful when removing the bottom, otherwise you may cut yourself.
A small but very functional flower bed can be made from a piece of burlap. Make a bag from the material and hang it, for example, on a pole. What is typical, it is suitable for both flowering crops and fragrant herbs (you can add the latter to tea directly from the “bed”).
To create a flower bed, you can also use things that are simply lying on the street. A striking example of this is a dilapidated log. Take it, cut out a longitudinal depression and plant flowers there (this option will be described in more detail below).
A stump that you couldn’t get rid of can also turn into a flower bed. Tie pots to it with wire and plant spectacular flowing flowers there.
But another option is a milk river, as if pouring out of a can. But in this case it is very important that the green background is monochromatic.
Is your old bicycle no longer a means of transportation? But you can turn it into the highlight of your garden! Paint it, and instead of the trunk, install this container with flowers.
The next example is a full-fledged composition. Combine old garden tools with flowers and experiment.
A massive stone vase will also look good as a flower bed. As an option, you can use a large clay pot for this purpose (this one can stand in the open air for several seasons).
Today, mailboxes are hardly ever used, but you shouldn’t throw yours away! Make a compact flowerbed out of it and hang it on the gate.
Video - Making flower beds from old things
Master Class. Do-it-yourself vertical flowerbed
Vertical flower beds have become increasingly popular in recent years. Let's look at a short step-by-step instructions for making such a flower bed using multi-colored flowers. The best option for composition is, of course, .
For work you will need the following consumables:
- wire mesh;
- plastic ties;
- soil mixture for flowering crops;
- large flower pot;
- strong cellophane.
After preparing everything you need, get to work. For the convenience of visitors, the information is presented in table form.
Table No1. Instructions for creating a vertical flower bed for the garden.
Steps, photo | Description of actions |
---|---|
Take the wire mesh and make a cylinder out of it to serve as a vertical base. Use plastic ties to secure the edges of the mesh. Place the resulting cylinder in the flower pot. | |
Take some strong cellophane and wrap it around the chicken wire. | |
Using the same plastic ties, attach the edges of the film to the vertical base. | |
Fill the resulting form with pre-prepared soil mixture for flowering crops. | |
Also fill the flower pot with soil (this will make the wire mesh more stable). | |
Cut holes in the film for planting flowers. Be sure to do this in a checkerboard pattern. | |
Plant flowers in the holes, then water carefully. | |
Also plant a few plants on top (also water them afterwards) to make the composition look complete. | |
Water the finished vertical flower bed regularly and apply fertilizer in a timely manner. In this case, it will look the same as in the photo (or even better!). |
Wire mesh prices
wire mesh
Master Class. DIY flowerbed "Palette"
We are all artists at heart, and therefore we must take a creative approach to creating something beautiful (including an ordinary garden flower bed).
To make such a flowerbed yourself, first decide on the flowers that will decorate it.
In addition, you will need pots in which the seedlings will be transplanted and where they will bloom throughout the summer.
Also prepare a rake and shovel - they will also be needed.
As a base, you can use a sheet of plywood, polystyrene foam (not recommended, since the material is light and can be blown away by the wind) or furniture board.
To secure the base, prepare clamps in advance.
You will also need paint or stain, varnish.
So, first, take the base and draw a palette on it with a marker.
After this, cut out the shape using a jigsaw.
This is what the finished base should look like.
After this, make the fastenings. The sample drawing below shows what they should look like.
To make flower bed fastenings, use bars.
Using clamps, attach the fasteners to the base of the future flower bed.
Using pipe scraps, you can make stands for rakes and shovels.
After this, decorate the garden tools - for example, paint them with polka dots or paint them one color.
Then take the base of the flowerbed and, if furniture board or plywood was used in production, cover it with stain, and then with varnish.
Wait for the coating to dry and install the flower pots. That’s it, the beautiful “Palette” flowerbed with your own hands is ready!
Video - Making a flower bed from a wheel
Master Class. DIY flowerbed “Turtle” made from car tires
We offer another interesting option for creating a beautiful garden flower bed. Step-by-step instructions are given below.
Table No. 2. Instructions for making a flowerbed “Turtle”.
Steps, photo | Description of actions |
---|---|
The finished flowerbed of tires will look something like this. | |
To begin, prepare: - tires with studs (2 pcs.), always one without steel cord; - screwdriver; - paint for external works, brush; - self-tapping screws 3.5x55 mm (15 pcs.); - a large knife. |
|
In a tire that does not have a steel cord, cut out the bead on both sides and cut it into four identical fragments. | |
As a result, you should have the following elements from which the paws will be made. | |
Cut a couple of rectangular sections on each of the blanks. | |
As a result, the workpiece should look like this. | |
The second tire, from which the body will be made, may be slightly larger. Mark it into six equal parts, make slits at the border of the sidewall and tread - one narrow (for the tail), one round (for the head) and four wide (for the paws). | |
Insert the pre-made paws into the corresponding slots, fix each with two self-tapping screws. | |
Here is another photo, from a different angle. | |
Connect the edges of each paw as shown in the image: on one side with a self-tapping screw, and on the other with a wire staple (similar to a stapler). As a result, the paw will be narrow near the body, and voluminous on the other side. | |
Take a piece of tire, make a tail out of it and attach it with the same screws. | |
You can use a spray bottle to make the head. | |
The hole for the head that you made earlier should be such that it itself is located at an angle of 45 degrees. Secure the bottle with a self-tapping screw (it should go right through, as in the image). | |
When assembled, the flowerbed should look like this. | |
Paint the flowerbed (you can use two colors, as in the example). Tread elements can be used to emphasize the texture of the turtle. If the tires are “bald”, come up with your own design. | |
Color your head too. The turtle, as you can see, is smiling contentedly. That's it, the flower bed is ready (just wait until the paint dries)! |
Flowerbeds of annuals - diagrams
Flowers for flower beds are selected according to color, variety and many other factors. And to make flower beds from annuals, the diagrams of which you will find in, on your own, you do not need to have the skills of a landscape designer. The main thing is to calculate everything correctly before starting work and become familiar with the basic rules for creating flower beds.
Master Class. Do-it-yourself log flowerbed
To make such a composition you will need the following consumables:
- log (diameter – 40-50 cm, length – about 200 cm);
- flower seedlings;
- gravel;
- primer;
- film.
In addition, the work will require:
- simple scissors;
- chainsaw (can be electric);
- wooden hammer;
- bit.
So, everything is ready, you can start working directly.
Table No. 3. Instructions for creating a flower bed from an old log.
Steps, photo | Description of actions |
---|---|
First, clear one side of the log of bark (this is where the chisel comes in handy). | |
Make cross cuts on one side of the log in increments of 50 cm and a depth of about ¼ of its diameter. | |
Cut off part of the log from the side where the cuts were made, so that the result is a longitudinal surface. | |
Make cuts on this surface as shown in the image. | |
Use a chisel to remove sawn-off pieces of wood and create a sort of “trough.” | |
Use scissors to cut the film to the shape of the resulting “trough”, and then lay it down. | |
Place gravel on top of the film and a thin layer of fertile soil on top. | |
Plant flower seedlings and enjoy the resulting beauty! |
Prices for wood primer
wood primer
Master Class. DIY floating flowerbed
A floating flowerbed is a kind of plant island moving across a body of water. It looks amazing, and making such a flower bed at home is quite simple. Essentially, it is a plastic or wooden base with a sealing mesh and soil placed on top for planting flowers. Instead of soil, you can even use pebbles or hydrogel, but it is important that there are already aquatic inhabitants and other plants in the reservoir (they indicate the presence of nutrients).
What plants are suitable for this? In principle, any, but be sure to take into account the floating ability of the structure, because too large plants can easily flood the island. We also note that it is better to give preference to crops that love moisture (sedge, lilies, papyrus, variegated potted flowers or ornamental grass).
First, decide what material you will use to make the island. Determine the dimensions yourself, as well as the immersion depth (preferably about 7 cm from the bottom). Please note that the soil should not be washed away by water. Use gravel to adjust the diving depth.
- A ready-made tray (or, alternatively, a mesh pot) can be purchased at the store.
- The container can also be made from boards (you will get a small box with holes), treated with impregnation to protect it from moisture. Such a box must be covered with spunbond or geotextile, and then covered with a drainage layer and soil.
- The third option is to use plastic bottles. They need to be cut, holes made in the base, and then covered with the same geotextile.
It is quite obvious that a container filled with soil will not float on its own - for this you need:
- cut out rectangular frames from packaging foam (the kind left over after purchasing household appliances) that will hold the island on the surface (they are attached to the top of the flowerbed, and not to the base);
- foam the perimeter of the flowerbed and its upper part with foam;
- make a pontoon from plastic bottles along the edges of the island;
- use an inflated car inner tube.
What about floating flower pots?
They can also be launched into the water, but the reservoir must be small and necessarily without aquatic inhabitants. For example, you can cut out a foam base for flower pots, like the one in the image below, to ensure stability in the water. However, such floating pots will need to be watered regularly.
How to decorate a floating structure?
- You can disguise the unattractive edges of the island with earth, moss or branches.
- You can also install LEDs on such a flower bed, the operation of which is controlled using a remote control.
- Finally, you can put animal or bird figures there (for example, a ceramic stork).
Note! Before launching a floating flower bed, it must be tested! If it is unstable, then it should be modified. Also keep in mind that the flowers will grow, which will change the balance of the island.
Master Class. DIY flowerbed made from old chairs
To make such an original flower bed, prepare:
- old chairs;
- spray paint;
- sandpaper.
All other materials depend solely on your imagination. You can, for example, use a wooden box instead of a pot. In any case, first remove the old paint from the chairs and sand them thoroughly.
Clean the chairs from dirt and dust, and then paint. It is quite obvious that it is better to do this outside, because there is no doubt about the toxicity of the paint.
If necessary, you can also paint the flower pot.
When the paint is dry, you can paint the chairs. We recommend using acrylic paints for this, included in the paint-by-numbers kit. These do not wash off and do not require varnish.
Thanks to such original flower beds, it is quite possible to create entire compositions.
This one, for example, is made from old shoes and children's sneakers that no one has worn for a long time.
Flowerbed from an old bicycle
As you can see, you can make a beautiful flowerbed with your own hands, and there are really many options. We hope the master classes offered here will help you with this!
Video - DIY stone flower beds
I present to your attention 27 original photos of do-it-yourself flowerbed ideas, unlike everyone else’s, that you can create with your own hands at the dacha. Every flower bed, made with love and attention, absorbs the energy of the owner, embodies her care and is in tune with the owner in all respects. This is visible from the outside, let’s look at interesting examples of country house design and take something into account!
1. Flowerbed of long-flowering plants
Such a flowerbed has several main color lines, with low-growing flowers in the foreground and medium-sized flowers in the middle. In the background there are bushes and tall plants. The color scheme of the flower bed can be three-color.
2. Flowerbed in a tree trunk circle
An original idea for a flower bed in a tree trunk, decorated with a border of stones. It can be either mobile, for one season, or stationary, with the expectation of long-term stay under a tree.
3. Idea for a flower bed near the house
The idea guides us on how we can arrange the northern side of the house, or the one that receives insufficient sunlight. In such places it would be most rational to plant hostas.
4. Flowerbed in the stump of a cut tree
If a large tree previously grew on your site, and now a stump stands lonely in its place, then do not rush to uproot it. I suggest using it as an original raised flower bed. You can also plant low flowers in the root zone.
5. Flowerbed - drawing
A flowerbed - a design, for example in the shape of a flower - can decorate a country space. Agree, this composition looks quite fresh and pretty.
6. Flower bed made from cut wood
By the way, returning to cut trees, not only the stump, but also the trunk can serve for several seasons as an authentic flower bed.
7. Flower beds in the patio paving space
When paving the patio area, select several cells for planting. In the future, by planting flowers in them, you will get nice plant inclusions in the middle of a stone or concrete surface.
8. Flower bed along the walls of the house or veranda
There are countless options for making such flower beds; here is another example from real life. A flowerbed near the veranda of one of the houses.
9. Raised flower bed in the middle of the lawn
A beautiful kidney shaped raised bed placed in the middle of the lawn as an accent piece to attract attention. The walls of the flower bed are made of facing stone.
10. Wild flower bed in the tree trunk circle
An example of a simple wild stone flowerbed formed near a tree.
11. Combination of flower bed and gravel backfill near the patio
The flowerbed format can also be in the form of a half composition, a combination of gravel and plants.
12. Temporary flower bed of potted plants
An option for a replaceable flower bed in pots, the exposure can be changed regularly, depending on the flowering of the plants.
13. Flowerbed accent with a decorative wheelbarrow
A nice solution is an accent flower bed with decorative elements: a wheelbarrow and a lantern. Even the simplest flowers look impressive in this composition.
14. Vintage flowerbed from an old suitcase
I am somewhat surprised by the tendency to use garbage in Western countries. There it is considered a high degree of aerobatics to bring some things from a landfill into the landscape design. But, nevertheless, I suggest you admire the solution.
15. Beautiful flower bed with a border made of river stone
A nice flowerbed, organically complemented by a border of river stones - pellets.
16. Raised flower bed made of wooden beams
If you have an interest in using wood in the design of flower beds, or maybe you have some scraps of timber left over, then decorate a similar flower bed with it.
17. Round flower bed around the conifer
An interesting solution to the design of a round flower bed, radially planted flowers are woven in layers into the outline of the composition’s ornament, logically converging on the central conifer.
18. Romantic rose garden
My dream is a rose garden in my summer cottage! Now there are many hybrids that bloom almost all summer. Of course, roses require care, but what a beauty!!!
19. Fabulous landscaping with a gravel path
An inspiring example of cute cottage design, the idea of freestyle is really difficult, although it seems like a fairly simple solution. This is such deceit...
20. An old bed as a flower bed
Another example of the controversial idea of a flower bed. Reminds me a little... Let's not talk about sad things...
21. Hydrangea flower bed
A beautiful idea for a flower bed along a fence made of hydrangeas. In general, I dare to recommend hydrangea for use in your summer cottage compositions. There are many adapted hybrids specifically for our latitudes.
22. Vertical tower
A cute flowerbed idea - a vertical tower. The base is metal stands into which small pots of flowers are inserted.
23. Idea for flower beds and window trays
24. Vertical flower bed idea
A beautiful idea for a vertical flower bed made of a wooden cellular base with soil. The idea is somewhat complex and perhaps short-lived. However, why not?
With the help of decorative flower beds you can play out interesting scenes. If you make a flowerbed, for example, in the form of a fire with a pot, then this composition will definitely not be deprived of attention.
26. Flowerbed made from wood cuts
The cut tree can be used to create a raised flower bed. The decorative effect of the composition will be given by the varied texture of wood cuts.
27. Bright peonies along the house
Well, at the end of the selection, I would like to wish you the embodiment of all your ideas, even the simplest, budget ones. After all, the main beauty of our dachas is not the cost of investment, but our care and attention to space!
Bright spots of flower beds and flower beds on the site are not only a way to decorate the site. They perfectly distract attention from some problem areas. By the way, this can also be used as a guide when choosing a location. We’ll talk further about how to make flower beds and flower beds with your own hands at the dacha, in the courtyard of a private house. This is not an easy task, of course, but it does not require knowledge of higher mathematics.
What are there
First of all, let's find out what the difference is between flower beds and flower beds. The flowerbed has clear boundaries and shape: circle, oval, square. Most often it is separated from the rest of the area and raised above it. We most often see this type of landscape design in parks and on the streets.
This is a flowerbed. It has a clear, strictly defined shape and geometrically correctly located plants
A flower garden is any place where plants of any shape are planted. Sometimes it comes with a fence, sometimes it doesn’t. Boxes with flowers hanging on a fence or wall are a flower garden, plants planted in old galoshes are also a flower spot on the lawn and a ribbon along the path are all flower beds.
Let's understand the terms a little. Now about what they are. They are distinguished primarily by flowering time:
Depending on the type of plants planted, there are annuals, perennials, and mixed ones. In some, only one type of plant is planted. They are called monoflowers or monoflowers.
They can be raised, they are also called high, and they can be multi-tiered. Their construction consists of several stages: first of all, a fence is built, then soil is poured into the finished form and plants are planted.
That's all with theory, let's move on to practice. Let's start with where you can make flower beds and flower beds with your own hands.
Where to do
When the yard is spacious it’s just great. Find the most visible place and plant a flower garden there. What to do if the entire territory has already been developed, but you want to plant flowers? You can always find a place. For example, near your house the area is concreted or lined with slabs, stone, etc. You can make an excellent raised or even multi-tiered flower bed with your own hands against the wall of your house. And there is no need to break the coating. A fence made of brick or stone is built right on it. It is advisable to lay them on the solution, and then cover the inside with waterproofing impregnation (bitumen mastic) so that when watering, water does not flow onto the path. Then you can fill in the soil and plant flowers.
They plant flower beds along the fences. This is a common way to decorate, for example, a long driveway to a house. But this can also be done in different ways. Here, as well as near, a high flower bed looks better.
A high flower bed made of boards. Construction will be inexpensive, and the appearance will be solid
You can plant a flowerbed in front of the gate. Outdoor flower beds must be durable. That’s why stone fences are usually used to implement them: just in case. If desired, you can make tiered flower beds. They are more difficult to build, but much more attractive than flat ones.
Outdoor multi-tiered (multi-level) flower bed of complex shape
Even if the yard is surrounded by walls on all sides, you can still find a place for flowers: Hang on the walls, in pots or in the form of a flowering wall, put up a stand, etc. You can make flower beds in the courtyard of a private house with your own hands from anything and anywhere. It is only important not to make a mistake with the style: it must coincide with the design of all buildings. Some ideas in the photo gallery.
You don't need a lot of space and can be moved. A portable flower garden is convenient
You can make a flower garden in your dacha near a tree. They already belong to the category of garden ones. Don't want it to be banal? Come up with an interesting fence.
What and how to make a fence from
The most common fencing for flower beds is brick, wild stone, boulders. You can make a structure out of brick in a strict “ceremonial” manner. Boulders and wild stone are more intimate, non-standard fences.
Since they have a decent weight, a foundation is often made for a brick or stone fence for a flower bed. Not if one or two rows are laid, but if there are four or more rows. If the device is installed on a concreted area, you can do without a foundation at all, but if you plant a flowerbed on a lawn or soil, then it is advisable to do so.
It is not even necessary to fasten two rows of stone or brick with mortar. They can simply be laid one on top of the other, covered from the inside and covered with earth. Brick flower beds made using this method will have to be adjusted frequently: the bricks can “move” out of place
First of all, remove the turf from the marked area. If you plan to make a high flower bed, dig a groove around the perimeter, about 20 cm deep, and 5-10 cm wider than the planned fence. This ditch is filled with crushed stone, compacted, and poured with liquid cement-sand mortar. For 1 part of M400 cement, take 4-5 parts of clean sand, mix and fill with water until it becomes sour cream. This semi-liquid solution is used to pour crushed stone. When the concrete has set - you need to wait a few days - you can lay out the border for the flower beds.
How to make a border from brick or stone
Do-it-yourself flower beds and flower beds made within a fence of stone and brick are the most expensive to build, but also the most durable. They will last for several years without any problems.
Stones or bricks are placed on a cement-sand mortar, similar to the one used to fill the crushed stone, but thicker. There should not be much mortar between the bricks - 5-8 mm. If you are laying cobblestones or natural stone, it is easier to first lay them “dry” by selecting the dimensions, and then relay them with mortar.
A few ideas on how to design stone borders for flower beds and flower beds in the photo gallery below.
This is a border for a cobblestone flower bed. A different technique was used - a roller is formed from a semi-dry solution, small stones are stuck into it
If you don’t need to raise the plantings that much, and you only want to mark the boundaries of the area planted with flowers, but you are afraid that if you just dig a brick in, it will fall, then you can dig a trench, fill it with crushed stone, and insert flagstone into the crushed stone (stone sawn into plates , it can be found in the section that sells materials for exterior decoration of the house) or standing to lay bricks. Spill liquid cement-sand mortar around the installed fence elements. After two or three days, when the concrete has set, you can continue working: fill in the fertile soil, but you can’t load the curb or step on it for about another month: that’s how long it takes for it to gain strength.
Using the same principle, you can frame a flowerbed with your own hands from slate or tiles cut into strips. A flower bed can be made from metal or asbestos slate. There are scraps left after installing the roof - use them. Here's what might happen.
Photo of a flower bed made of slate - such a fence looks good
Made of wood
It’s easier to make a fence for a flower bed out of wood: it doesn’t weigh that much. On the other hand, it is less durable. Flowerbeds and flower beds made with your own hands from wood can last for several seasons. Then you will have to restore or remodel them. It is used very rarely for ceremonial flower beds, but in a dacha or near a private house, a flower garden fenced with a wooden border is original and stylish. Especially if it resonates with the design style of buildings on the site.
Wood in any form can be used to decorate garden flower beds. Flowerbeds are made from boards, small-diameter round timber (small logs), blockhouse (boards convex on one side, similar to a log) and any other wooden remains. You can even cut a dead tree into logs, bury/hammer them into the ground, making such an unusual flower bed.
Birch logs - an excellent fence for a flower garden. An interesting idea for a high flower bed - a well is made from scraps of logs. Two pieces of a block house, installed one on top of the other - and in front of you is an excellent country flower bed.
How to make a wooden border? Find a log of small diameter, cut it into logs of different lengths and split them in half. You will get blanks like in the photo on the left. They are laid on a flat surface with the convex side down, one next to the other. Take a flexible thick wire and use staples from a construction stapler or bent nails to attach the wire to the flat side of the pieces of wood. One wire is nailed at the bottom, the second at the top. The result is a flexible wooden border that can be used to enclose a flower garden of any shape (pictured on the right).
To prevent the wood from losing its attractiveness and rotting, it is treated with protective impregnations. They can simultaneously give it color, or they can be colorless. From such pieces of wood collected into a ribbon, you can make flower beds of any shape with your own hands. You dig a shallow ditch, a little wider than your fence, insert a fence for a flower bed there and cover it with soil, compacting it.
From boards and timber
In our country, wood is one of the most inexpensive building materials. That’s why they build a lot and often from it. They also make a fence or fencing for flower beds from wood. The easiest way to fence a flower bed is with boards. For support you will need several bars - not very thick, but wide. Approximately 50*150 mm and edged board 20 mm thick. Choose its width yourself so that several pieces installed on the edge will give you the required height.
Impregnate the wood with protective impregnations, when it dries you can begin work. First, the support bars are installed. They can be sharpened at one end and carefully hammered in without damaging the upper surface (put a piece of a block and hit it), or you can dig a hole about 50 cm deep, install a block in it, bury it and compact the earth around it. The bars are installed in increments of 1-1.5 meters, depending on how wide the flower garden is. The wider and higher it is, the greater the mass will have to be supported, which is why supports are installed more often.
Boards are nailed to the exposed supports. They can be stuffed from the inside and then the support beams will be visible, or they can be filled from the outside. In the second option, only the wall of boards will be visible. The joints of the boards should be on the beams.
Flowerbeds from boards can be made in a variety of shapes. Even in the form of a pyramid. There are some interesting ideas below.
And this is how to make a flower bed in the form of a pyramid
Made of plastic
There are many types of ready-made fences for flower beds and flower beds made of plastic or resin. They have special legs that sink into the ground along the edge of the planted area.
But we are not talking about them, but about flower beds made from scrap materials. For example, you can make a decent fence for a flower bed from plastic bottles.
They are selected by volume and color. This will make the fence look better. Then they cut off the necks at the same level and stick them into the ground. This is one mounting option for creating a low curb. The second one will be much higher. It can be used when fondanting taller plants. In this case, they take a wooden beam and nail the caps to it at a certain distance, so that the bottles are close to each other. Bottles are screwed into the caps. To make such a plastic fence for a flower garden more stable, it is pierced through with wire closer to the bottoms and closer to the narrowing point at the neck. The finished fence section is installed and fixed on the ground.
Despite the fact that the material is waste, if everything is done carefully, such a fence looks decent, pleasant, and attractive. Photos of fences for flower beds and flower beds made of plastic bottles are in the photo below.
We couldn’t pass by... a fence made of old bicycle wheels. Original flower beds can be made from any junk. If you have talent, of course...
Old bicycle wheels can decorate your dacha. How? Make a fence out of them for a flower garden. A flower bed made of wheels is cool...
Original and unusual flower beds and flower beds
Sometimes you’ll be amazed at how people manage to make original, unusual, and, most importantly, beautiful things. The same applies to the design of flower beds. Well, I would never have guessed that an old chest or galoshes or a hat could be turned into a flower bed or plant pot. See for yourself - the photos don’t lie.
Tire flower beds
Completely unattractive car tires are turned into beautiful flower beds. The tires are cut, the edges are sanded using a grinder with an emery attachment. The resulting flowerpots are washed with soapy water and dried: the plants will not develop well if you do not wash out the engine oil, gasoline and other similar substances that get inside.
After drying, it is painted. You can paint a tire (tire) with regular oil paint, but the surface must be grease-free, dry and clean. It lasts for several years. There are special paints for tires. They cost much more - they are made for styling tires. After the paint has dried, you can install the finished tire flower bed, fill it with soil, and plant plants. How you can make a flower garden from tires with your own hands, or rather, how to design it, look below (the photo gallery scrolls automatically, if you need to stop, click on the picture).