How the LED fog lights shine. LED fog lights for the car: universal, with angel eyes, linced. Distinctive features of LED headlights

Fog lights are used to illuminate roadbed in bad weather. They are located below the main headlights and contribute to excellent lighting of the roadway, especially with adverse weather conditions. Lanterns are and illuminated by the part of the road, where the fog is least. For high functionality, the Light in PTF should be so competently chosen so that it can provide you with full protection and safety on the road. In this article we will analyze how to cope with the above problem on your way.

Choosing for further installation to your car, fog lights, you should know three factors that will help you choose the right lamps.

1. The light stream, which is issued by the fog, is directed, but forward and distributed on the sides. It looks like a wide cone on the horizontal surface. Due to this, the fog or other precipitates is illuminated, and the distance is 30-40 cm above from the road, it is in this interval there is no fog. In the rules of the road, it is noted that fog lights should be placed symmetrically, but not closer to 40 cm for the side part.
2. It is also worth remembering that PTF should not be mounted higher than 25 cm from the road. Below, unfortunately, the traffic rules are also not allowed, but not higher than the headlights of the head lighting. Such a location of the headlight will allow properly lighting the road into fog, rain and snow. In this case, the yellow light will be more efficient, unlike white lamps.
3. Yellow light has a longer wave compared to white and blue lighting. It is for this reason that he can "bypass" drops of precipitation, and not reflecting them, thereby not giving seeing the road.

This type of automotive lighting is intended for use not only in conditions of poor visibility (rain, fog, snow), but also at night. It is for such situations and conditions that your car must provide powerful lighting. Because visibility is significantly limited compared to the bright day of the day. PTF is very often used for tuning cars, but in this case, you should not use yellow headlights.

Imagine that there are powerful snow-white fog in the roof of the SUV - the spectacle that you will not fasten to admire. When choosing and buying LED PTF, you should consider several factors that can further affect your safety driving.

The headlights of additional lighting should diversify and improve the lighting of the car in bad weather and prepare the car for use for various trips. Therefore, the choice of PTF should be passed seriously.

1. Size and appearance should look harmonious with your car. Do not mount too big headlights on the roof "Niva", it will look not quite aesthetic.
2. The title type must accurately coincide with the base of your car.
3. Pay special attention to your nutrition. It can be 12 and 24 V.
4. Look at how many lamps are included. Sometimes for the "funny" price, you can purchase a poor-quality lamp in the amount of one thing.

Features of fog lights

LED headlamps have a metal housing, it favorably affects the cooling of crystals. If you finally decided to replace your regular lamps on LED, then you need to stabilize current to work. For this use resistors or special dimmers. The latter is much more expensive, however, more efficiently. We can offer the most sought-after lamps that may differ from each other with the type of base, power and the number of LED crystals on the housing. Base Lamp PTF H27 / 1, H27 / 2, H1, H11, H3, H8, HV3 / HB4. If we consider the number of crystals on the lamp housing, then it is necessary to take into account the factor that what is more, the lamp brighter. Crystals are located evenly throughout the case. If their odd amount (5, 7 or 9), then one crystal is mounted on top.

• The working nominal voltage of the device is 12 V;
• The level of illumination of the lamp varies from 220 to 350 lm;
• The service life of the PTF of this type is much larger than that of the standard incandescent lamps;
• They consume the minimum amount of car energy;
• LEDs are environmentally friendly, so they are not harmful to the environment and human health;
• Can be used in extreme conditions, they are not afraid of the vibrational impact of the machine;
• Lamps can operate at different ambient temperatures. Both very low and above 0 ° C.

Carefully familiar with the above material, you can do the following findings that lED bulbs - This is the perfect solution for fog lamps. After all, with the right and high-quality light, you will not have to worry about that something will be able to prevent you from the road, especially in the dark and with bad weather conditions. The lamps are very ergonomic, they consume little energy of the car and will serve quite a long time period. In addition, they will be able to cope with Nechato, they will still become an excellent solution in the additional tuning lighting of your car.

Most vehicle owners are thinking about using LED fog lights for the car (PTF). Car enthusiasts that have established a product in fog lighting lighting vehicles noted an increase in visibility while driving in adverse weather conditions.

The efficiency of the use of LED or LED lamps for the car is explained by their work in the spectrum, differing from standard autolapm, and their light flux is directed downwards towards the roadbed.

Is it possible to install LED lamps in fog lights for the car?

Question is it possible to put LEDs in the fogIt is important to consider not only in terms of technical possibilities for the implementation of the operation, but also from the point of view of the current legislation on the operation of vehicles. It is impossible to equip the lamps of the LED type of headlights, the design of which is not adapted to use such light sources.

It is intended to equip the vehicle by fog-lights with LED light sources, we note: the lighting devices must correspond to a number of requirements:

• the brightness of the glow is at least 1000 lm for each lamp;
• the angle of the glow is within 300.

The requirements of the current legislation provide for three options for installing LED elements in headlights:

• Installing the LED into a regular place intended for the light source.
• Replacing halogen fog on LED by car, despite the fact that other machines of this model are equipped with a normal type of headlights of this type.
• Installing LED PTF by car with the use of anti-fog with halogen elements. In such situations, the car owner costs the permission to re-equip the vehicle in the appropriate instance, completely replace the halogen headlights on the LED with suitable characteristics and document all the changes to the traffic police.

From all of the foregoing, it follows that LED headlights are installed on any cars, the main thing to comply with the requirements of the current legislation and correctly select lighting devices.

Advantages and disadvantages

Specialists and users note the advantages and disadvantages of headlights in comparison with light sources of LED type:

• Long operational period - up to 50 thousand hours. They are reliably protected from mechanical damage, falling into their inner dust, dirt and moisture;
• Due to low power consumption, the LED headlights do not create a large load on the car generator;
• During operation, the color of the light flux of such headlights is practically not changed;
  LED headlamps emit bright white light, providing good lighting;
• Easily installed at any convenient location on the car housing: bumper, roof, body elements.

• in case of failure, at least one LED will have to change the entire PTF;
  installed on the external elements of the car body, such headlights can easily steal;
• high cost, if you compare them with other types of lighting devices.

Main classification: Table

Lamps installed in LED fog lights for a carare divided depending on the parameters:

• Type of light source According to the design of its base: H1, H3, H7, H8, H10, H11;
• Power supply: 12 or 24 V. What is important, models that are operating from 12 volts are shone no worse than those in which the voltage of 24 volts is supplied;
  brightness of the glow;
• The shade of the light flow of the light fluxdenoted by the color temperature measured in degrees in Kelvin: 6-6.5 thousand k - cold white; 4.2-5 thousand k - neutral white; 3-3.5 thousand k - warm white. The brightness and temperature of the light stream created by the LED lamp is completely different parameters that are not related to each other. LED devices that produce the luminous stream of the same brightness differ in different color temperatures.

The table below contains information about the basic characteristics of the most popular types of LED lamps installed in the headlights:

Nissan Headlights

How to choose fog?

• types of LEDs installed in PTF;
• the brightness of the light stream and its color temperature;
• pTF manufacturer and product price.

Types of LEDs

The characteristics of the light power emitted by the LED lamp depend on the type of source of artificial light.

Popular to date types of LEDs used to equip PTF are:

• High Power - The most expensive LEDs characterized by increased power and, accordingly, high light output. The number of crystals in the LEDs of this type can be from 1 to 6.
• SUPER BRIGHT SMD. - Popular LEDs, which is explained by the optimal price / quality ratio to which they match. Such LEDs can be collected on chip 5050 or on cheaper chips 1210 and 3528, characterized by low light emission.
• SUPER FLUX, HIGH FLUX - inexpensive LEDs that create a small stream in power. When using the LEDs of this type for the manufacture of automotive lamps, they are placed in a large quantity in a transparent body that performs the role of the lens.

Brightness and color temperature

Choosing LED fog lights according to the degree of brightness of the emitted flow created by them, focus on comparative characteristics:

• LED 5 watt High Power type lamp creates the same in brightness of light power as the usual 20-watt device;
  lEDs of a similar type of 10 watts shine just as bright as 50 watt incandescent lamps;
• 18 Watt High Power LED Devices are comparable in brightness with 100 watt incandescent bulbs.

In terms of color temperature, LED devices are in demand, forming a cool white light flux (Cool White). They operate in the range of color temperatures of 6000-6500 K, are able to provide good asphalt visibility even in complex meteorological conditions.

Less popular and rarely found on sale are LED lamps forming light fluxes of warm white and neutral colors.

Toyota Headlights

Manufacturer and price

The range of automotive stores contains a wide variety of LED lamps from different manufacturers, the prices for which they seriously differ. When choosing such products, the safety of the vehicle driver often depends on the quality and efficiency of operation, experts advise the preference of products of well-known and well-proven trademarks.

Such LED devices are more expensive than their analogues from unknown manufacturers, but the high cost of these products is fully justified by their high quality, reliability and durability.

The leading manufacturers of LED lamps, the products of which can with confidence advancing to acquire each motorist, are:

• Philips (Narva brand);
• OSRAM;
• Sirius.

We invite you to read and purchase the appropriate option:

Video: why it is worth to give preference to LED fog

Compare headlight characteristics with lamps of other types and make the right choice, help the video:

LED or halogen fog: comparative table

Line LED PTF

Recently, great popularity conquer linated LED headlightsSupplemented by special optics.

The use in the design of the PTF special lenses allows you to solve several important tasks at once:

• effective lighting of the road leaf, which is ensured by the correct focusing of the light beam generated by the lamp;
• reducing the consumption of electricity and degree of heating of the light source due to the possibility
• use in PTF Lapped Power Laps;
• giving a car presentable appearance.

With angel eyes

So-called PTF. with angelic eyes Popular motorists are popular with linas headlights that can work in one of three modes:

• lED ring on the circular perimeter of the headlight;
• the central part of the headlight equipped with a lens;
• and the bezel ring of the headlights, and the LEDs in its central part.

In addition to exceptional aesthetic attractiveness, the LED headlights of this type provide good lighting due to the lens used in their design.

Headlights for cars

Universal

Many manufacturers of LED headlamps offer Universal Product models for installation in cars of many brands without a significant reflection of their design.

In the base set of similar products, along with universal fasteners, a special mechanism includes adjusting the angle of inclination of the installed lighting device. It allows you to install universal PTF with an inclination angle, like regular car headlights.

Headlights for CHERY Cars

Fog compatibility table and car brands

Update

Exposure from the document:

"The objective side of the composition of the appropriate administrative offense may only take place in the case of the simultaneous inconsistency of the color of the lights and the mode of operation of such devices with the requirements specified by the manufacturer in the operational documentation, and in cases of establishing additional light instruments."

"At the same time, in the case of inconsistencies, only the color or mode of operation of light instruments installed on the vehicle, called above the requirements of the management of such a vehicle can be qualified in part 1 of Article 12.5 of the Administrative Code of the Russian Federation."

Well, you have already noticed that the LED light sources almost half outled ordinary incandescent lamps, halogen and even xenon lamps? In fact, at the beginning of the 21st century, we witnessed the next revolution in the world of light sources. It is not surprising that in the end the LEDs came massively and in the automotive industry. Every year more and more new cars. For example, today, many car models are equipped with not only LED lamps installed in the rear optics or in front as daytime running lights. So, in recent years, a mass of cars with front optics came to the market, in which LED lamps are installed as near light.

Also, many modern cars began to be equipped with fontamines with LED light bulbs. It is not surprising that many car owners seeing such sources of bright and beautiful lighting on new cars, wanted to establish the same and on their vehicles. But, unfortunately, some motorists completely forgot that instead of ordinary incandescent bulbs or halogen lamps categorically.

It is also how it is impossible to install instead of conventional halogen sources of lighting gas discharge lamps (xenon lamps), without changing the headlights in which special lenses under xenon must be installed, as well as an auto-corrector and headlight washer.

Remember how more recently on the roads of Russia went a large number of cars with the "collective farm" xenon, which in most cases only blinded the oncoming drivers. But after the "collective farm" Xenon began to deprive rights, drivers who, instead of ordinary lamps, were installed in the headlights with reflectors xenon lighting sources, was noticeably dressed.

Unfortunately, paradise on the road lasted for a long time. Most recently, many cheap Chinese automotive LED lamps appeared in the Russian market, which can be easily installed with the H1, and H7 base. As a result, some drivers, forgetting a direct ban on the installation of non-factory sources of lighting in the near light of the front headlights, began to equip their LED lamps, many of which are even superior to xenon lamps on brightness.

But, alas, there are no miracles. For efficient operation of LED lamps requires a special lens. Naturally, no question of a reflective speech can not even be. In the headlights with reflectors there is no meaning of using LED lamps, since the LED lamps give only a directional beam of light. In the case of reflectors, the LED lamps of the near light will only dazzle counter drivers.

True, such a "collective farm" tuning today successfully stopped by the traffic police officers who have now become hunted on those car owners who thought that the xenon lamps are out of law, then, instead of ordinary lamps in the front heads, you can install LEDs.

But no. The law of severe and in relation to LED lamps. Here is our detailed overview of why, if your car initially does not provide factory LED light sources in the front heads,. For those who do not remember, that's how it sounds:

3. Managing the vehicle, on the front of which light instruments are installed with red lights or retroreflective devices of red, and equal light devices, color lights and operation mode of which do not meet the requirements of the main provisions on the tolerance of vehicles to the operation and obligations of officials to ensure road safety,
entails deprivation of the right to control vehicles for a period of six months to one year With the confiscation of these devices and devices.

Pay attention to words in the text: on front which installed light instruments with red lights or retroreflective red-growing devices, And equal to the lights, the color of lights and the operation mode of which do not meet the requirements of the main provisions for the access of vehicles

Simple words, everything that is not provided for by the manufacturer, installed on the front of the machine illegally. That is, if your car in another configuration is not supplied to the market without LED light bulbs, then you cannot install LEDs into the headlights of your car.

But even if your car is produced in some other configuration or LED front optics, you still have no right without installing new headlights to use on your car as a LED-lamp near light lamps.

It turns out not to violate the law and that your vehicle meets the requirements of the main provisions on the access of vehicles to the operation and obligations of job safety officials, to install LEDs in the front headlights you need to buy new headlights, whose design allows you to effectively direct the sources of LED Light on the road without the risk of blinding drivers of countercourses. Also, do not forget that after installing such new headlights, in principle, you must issue such a re-equipment of the car in the traffic police, making changes to the construction of the car, passing also tests in a special laboratory.

True, if the model of your car in some more expensive configuration leaves the plant with LED headlights, then if you buy other front LED headlights instead of their regular halogen or, DPS employees are unlikely to attract you on the road to administrative responsibility, because They will not be able to prove that your car did not leave the factory with LED closest light. In this case, you the main thing to change the headlights themselves, buying exactly that optics, which is installed on a more expensive package.

Of course, if you install the LED headlights in the car, which never went out of the factory with LED front headlights, then without the procedure for making changes to the TC design you can not do. After all, any traffic police officer theoretically can stop you and attract under Article 12.5 to justice, which, do not forget, threatens the deprivation of rights for a period of 6 to 12 months !!!

Is it possible to lose the right to install LED lamps in the fog?

By the way, it concerns those who think that the installation of LED lamps in the front fog lights is completely legal, since this type of light sources does not apply to the front optics. But it is not. Read attentively 3 part of Article 12.5 of the Administrative Code of the Russian Federation and you will see that the responsibility is also provided for the use of any non-factory lamps that do not correspond to the safety of vehicles on the front of the car.

Accordingly, if you install LED lamps in the front fog and will not pass the procedure for registration of changes made to the design of a car in a special laboratory and traffic police, making changes to the registration documents for the vehicle, and also received a special testimony, then for the use of illegal light bulbs on the front of the machine You can simply lose right.

Are you ready to sacrifice the beauty of your fog? Or do you think beauty requires victims? In fact, no matter how you think. Law is law. Once it is forbidden to install on the front of the machine not factory lamps (including in the fog), it means that it is impossible to do this.

Why? The thing is that by setting in fog lights, in which, as a rule, reflectors and halogen sources of lighting are used, you are essentially able to dove the drivers of opposite cars, since the LED light will scatter ahead of your car. Remember that to use LED lamps in front of the front, all lighting devices must have a special design for the proper beam of the LED light. No reflectors and diffusers. Only a special lens.

True, it is worth noting that the DPS employee on the road is much more difficult to reveal on your car illegally installed in the LED lamp fog. The fact is that if the traffic police officers have a special device, measuring the brightness of light sources of lighting, then they try to identify the inconsistency of headlight marking lamps. After all, all car headlights have a special labeling, which indicates which type of lamps should be used in one or another optics.

By the way, not all headlights in modern cars have similar labeling on the surface. But this does not mean that you can enjoy and run right into the store for buying beautiful but dangerous LED lamps. As a rule, in most modern cars, headlight marking can be detected on the housing in the subcontrol space. So the DPS employee will not work asking you to open the hood. In this case, you no longer prove that your car is completed with such headlights from the factory.

As for the fog lamps, the traffic police will be harder to prove that in your fontamans are "collective farm" bright LEDs and that they do not meet security requirements. Yes, of course, if you use a special device, you can figure out this in a minute. But there are not many such devices (that is, not all the crews of DPS).

And in order to identify that illegal lamps are used in fogging, the traffic police officer must somehow bring to the bumper to read the internal marking of the fog, which is applied to their housing. It is unlikely that every traffic cop will be ready for such tests, if, of course, you will not raise it with something. In this case, can actually go on the principle. Therefore, if you still violated the current legislation and installed in the fog lights of the LED lamp in the fog lights, then in no case include them in the city (in particular passing by the posts of DPS).

Also, do not turn on the bright fog at night on the country highway, if the car flow is moving towards you. If you are going in proud loneliness, you can include your fashionable fog lights along with distant light. It will be beautiful. But as soon as in the distance, notice the oncoming machine, turn off the fog and distant light so as not to blind the driver.

But it is better, of course, all the same will be removed by illegal LEDs from the fog and return ordinary halogens into place.

And finally, here's a comprehensive list of car faults that cannot be operated on public roads.

List of faults and conditions in which the operation of vehicles is prohibited

3. External lighting devices

3.1. Quantity, type, color, location and mode of operation of external lighting Do not meet the requirements of the vehicle design.

Note: On vehicles removed from production, it is allowed to install external lighting devices from transport motor considerations of other brands and models.

3.2. Headlight adjustment does not comply with GOST P 51709-2001.

3.3. Do not work in the installed mode or contaminated external light instruments and light rails.

3.4. On light devices, there are no diffusers or diffusers and lamps not corresponding to the type of this light instrument.

3.5. Installation of flashing beacons, methods for their mounting and visibility of the light signal do not meet the established requirements.

3.6. In front of the vehicle installed light instruments with red lights or red light lights, and the back is white, except for the reverse lamp and illumination of the registration sign, retroreflective registration, distinctive and identification signs.

As you can see, there is no direct ban on a specific type of lamps in the front lighting sources in the machine. That is, to deprive the rights may, in principle, for any non-factory light bulbs, installed in front, as because of them, the car can be recognized as defective under the above reasons.

There is another document that prohibits the installation of LED lamps into the headlights:

See the item " 3. Requirements for lighting and light alarm devices »

Also in more detail about this you can read in our article ""

And remember, if you still need to install LED lamps in the fog of fog, then you will have to start using them before starting them, go through a difficult and long procedure for making changes to the design of the car.

That is, passing almost the same path that car owners are held today, who wished to install gas equipment on their cars. Here is detailed.

Fog lights perform the lighting function of the road during poor visibility, namely the fog, rain, snow. PTF feature is that their location is located below headlights And during the weather, they highlight exactly the small layer in which there is no fog. LED PTF have unique light qualities that can bypass drops of precipitation and penetrate away into space, highlighting not only the road canvas, but also a significant part of the curb.

Technical advantages of LED PTF:

• Rated voltage 12V;
• Light level from 220 to 350lm;
• A large operational period;
• Eco-friendly, seismic resistant;
• Economy in power consumption.

On the page: 30 25 50 75 100

Sorting: By default, the name (A -\u003e I) Name (I -\u003e a) price (ascending) Price (descending) Model (A -\u003e I) Model (I -\u003e A)

This set of LED lamps is designed to be installed in fog lights. Features of the instruments are that they give out the yellow spectrum of the glow, which is considered the experts most effective in case. The lamps used the Korean production LEDs that differ little from CREE diodes in light parameters. The location of the diodes is so correct that the light cone from the devices is strictly directed horizontally. This ensures that the headflow drivers will not be blinded. When changing the halogen of the standard in the fog chairs, you do not have to be converted ..

Qualitative and correct light in fog headlands is a security deposit and comfort on the way. If you are not satisfied with the lamps of the regular type installed in PTF, change them on the LED devices. These lamps are manufactured in Korea and differ in light parameters fundamentally from halogen. Preferential features of lamps: no heating due to the built-in radiator; The lamp is withstanding strong vibration concussions; does not respond to voltage and temperature jumps; The luminous stream of the device is 1.5 times more than that of a standard halogenki; life time..

This set of LED lamps is designed to illuminate the road linen in case of bad weather. The devices are issued uniform, the luminous flux of the white spectrum, which illuminates the road and a small part of the curb by 100%. If you compare the lamp data with halogens, the latter lose in such paragraphs: LED lighting is much better, which makes a car trip more secure; Light from lamps has an optimal color temperature, which is more comfortable to the driver; devices are resistant to vibration concussions; Large service life; Low energy ..

This set of LED lamps is designed to be installed in fog lights auto, PSX base. When changing the regular halogenka on the Garaxe GX PSX 24W 5200K, you do not have to convert headlights or make them refinement. Advantages of lamps: no heating, thanks to the built-in radiator; The integrated driver into the lamp housing does not provide an additional resistor; devices vibrationally stable; give up to 100% more light illumination in comparison with the standard lamp; The lamp turns on instantly, without requiring a time to ignite it; Right ..

A powerful LED lamp that is placed in optics and allows you to improve visibility for the driver. This device, superbly steadily working even at voltages 12 / 24V. It has a yellowish light on 3000K in color saturation. The advantage of diodes is their nice and rich beam, with minimal spending of the power of the car. It is made by the Chinese corporation, but still at affordable price meets the high, good quality production. ..

Stylish, rich and incredibly bright flow of light, which is uniformly poured a highway in front of the car, will provide this kit consisting of LED lamps. The diode glow is more ergonomically and cost-effective, since it is characterized by the best light indicators, good-quality production, exploitation and endurance of sources. This light product is made by MTF. It is proposed for cars with 12 / 14V voltage in the system and produces a snow-white, perfectly clean and crystal light of light on 5500K. ..

Diode sources, which are offered to improve the optics of the car, to improve visibility and, accordingly, reducing the risk to get into a dangerous case on the motorway. The device is made by MTF and put on the PSX24W base. Suitable for cars with a power network by 12V, but also stably shines at 24V current supply system. Diodes are characterized by a powerful beam outlet by 3000k, providing extended and intensive light, with minimal traffic of transport energy. ..

Powerful beam, high-quality visibility, the snow-white glow per 4500K offers this model of LEDs that are supplied. The device is put on the PSX24W of the car optics, it gives a white on a 4500k beam and steadily works when current drops from 12 to 24V, that is, suitable for cargo and passenger transport. The tool guarantees increased visibility on the freeway, helps reduce fuel spending, because it does not consume a lot of energy consumption for its provision. Stable and fastest design is a guarantor of the duration of use and long light night trips. ..

MTF Corporation presented unique, powerful and good light bulbs that are put on the PSX24W base of optics and provide improved visibility when traveling. The snow-white light on the 5500K promotes well when dusk and it shows itself with Nekotnaya. The device does not spend a lot of energy of the machine and, moreover, is suitable for 12 / 24V of the power system. The beam is distinguished by saturation, intensity, and the diodes themselves will be a durable dietary production. ..

Yellowish, but the most intense, rich and powerful ray will provide a diode lamp with a diode glow, which is very relevant length of use in a modern automotive society. The proposed set is made by the ITF company, it is distinguished by good quality design, the use of good lamps and the length of use. Lamps do not overheat, do not burn out and sufficiently steadily behave with vibrations. This offer is made on the car 12 / 24V network, the PSX26W socket of optics and give a yellowish light on 3000k. ..

Automotive optics always require constant upgrades, because it will depend on the glow, your safety and comfort will depend on trips. To improve the quality of visibility, it is proposed to consider the option of installing this set of LEDs, by compliance with PSX26W optics socket. Diode sources are manufactured by MTF, provide a light snow-white spot on the road in 4500K at temperatures. Dignity not only in universality installation, that is, for 12V and for 24V of the system of car power, but also long-term suitability and low power consumption. ..

The LEDs with the PSX26W COLOR produced by MTF are offered for installation into the optics of all cars. They provide stunning clean, crystal bright and rich light, solving dark spots and poor visibility when traveling. The temperature of 5500K provides a snow-white beam, and the diode source itself is due to its power guarantees extended light. It is distinguished by resistance to vibrations, low power consumption and put on a 12 / 24V network of machines. ..

LED lamps that have a base of H11 / H16 / H9 and H8 are offered to improve the halogen glow of most cars with 12 / 24V power system. The devices have a snow-white beam on a 4500k temperature, which is homogeneously and highlights the highway and the driver's safety stir. Does not require large volumes of energy, and this indicator is meager. It is very simple, without requiring skills, and it is proposed in full configuration. In the design, only high-quality diodes were used, which are not characteristic of a quick exit from the fitness. ..

For the NV4 base, automotive optics offers a set of LED sources, which differ in the duration of the suitable period, ergonomic and stylish, bright glow. The lamps have a 5500k temperature, thus issuing a snow-white and high-quality glow that will ensure maximum visibility and reduce the increased riskiness of night trips for the driver. It is raised by a 12 / 24V system of food, and eliminates interference, due to no conflict with electronics. ..

The MTF manufacturer offers for vehicles with NV4 base, put a high-quality diode glow that will ensure the best lighting than the old regular optics. The device has a 4500K temperature, issuing a white intense stream that lies with a uniform web on the road, does not create lights and does not blind oncoming car drivers. It is characterized by a rated voltage of 12 / 24V, which is stably glowing. Good production, the use of high-quality materials served to ensure the duration of the operation of the product. ..

For optics and base of HB4, a set of LED sources is offered, which very carefully illuminate the road, ensure an increase in visibility. Despite the low, as it would seem, the temperature of 3000K in color and yellow glow, the quality of the light is much superior to the level of the halogen type of glow. The device has a unique feature - this is a job at 12 and 24V system of nutrition of the car, that is, is suitable for mounting and easy and cargo transport. ..

Ice lamp for use in machines, designed from 13 LEDs. It is placed in the fog-up standard connector of machines with H27 / 1 base. The lamp has a bright white radiance on a 6000k, which provides colorful expressiveness and test of the machine and increases visibility. The light is evenly distributed through the track of the track, providing a powerful light spot. The lamp has 1.9W energy consumption for each of the sources, and is offered for the 12V network voltage network. ..

A powerful LED source that is offered for mounting into a fog standard place with a connector characteristic in H27 / 2. This emitter provides not only good glow, but also an increased test of the machine, since it improves its expressiveness due to white radiance by 6000K. It is distinguished by low vehicles of automotive energy without affecting the electronics. It is put on a 12V nutrition system and constructed from 13 lamps. ..

Throw LED, released for mounting in the fog, having thus the regular connector. The lamp provides a snow-white and intense flow light on a 5500K, which can also act as a backlight of fluorescent lights. It has 2.5W power consumption power on each source of five, is placed on 12V car voltage and gives a ray to 250 tumor intensive brightness. ..

Diode source offered for mounting into a fog headlight connector. It guarantees high quality. Snow-white glow, powerfully punching rain and fog, as well as being an extra lamp for the use of daylight. It has a snow-white and colorful light on 5500K, giving out a powerful beam stream by 250Tumen. It is placed on H1 base of fog, consumes up to 15W to all device and guarantees the duration of use. ..