Crafts for the New Year from CDs. Crafts from CDs for the home. Coffee table made of discs

If somewhere there is an impressive box of films and music on CDs that hardly anyone will ever listen to or watch, then there is no need to rush to get rid of it. On the contrary, old disks will serve you well, because you can use them to make a variety of DIY disk crafts.

You can use discs to make creative interior decorations. For example, a lamp.

For it you will need:

Progress:

1. Glue together pieces of plywood with a diameter of 180 mm with a recess in the middle for the starter. Cover the inside of the recess with insulating material and the three holes for the limiting posts.
2. Drill the middle layer outwards, release the power supply and the lamp switch.
3. Using shoe nails, install a switch in the form of a toggle switch on the middle layer.
4. In one piece of plywood, drill three holes for the boundary posts, 10 mm deep. Insert the stands into the base of the disk.
5. Insert the fluorescent lamp into the base, connect it to the switch, and string the disks.
6. After the lamp is completely hidden under the discs, insert the cover. The lamp is ready for use.

A DIY craft made from disks in the form of a chandelier will also be original.

For it you will need:

• 12 discs with double mirror layer;
• screwdriver;
• drill with a diameter of 2-3 cm;
• wire cutters;
• pliers;
• matches;
• thin wire or paper clips;
• electric lamp with socket and switch.

Important! The work requires discs with a double mirror layer, as they allow you to obtain an unusual visual effect, in which the light is decomposed into a spectrum. If there are no such disks, then you can glue two disks together. Then you need not 12, but 24 cd.

Step-by-step instructions for making a chandelier from CDs:

1. Make a stencil. To do this, use a conveyor to divide it into sectors of 72 degrees each. Then retreat 5 mm from the edge and drill 5 holes.
2. Stack the disks, place a stencil on top and drill the disks. Each time, insert a match into the drilled hole. This is necessary so that the discs do not move from their place during drilling.
3. Install the lamp socket into the first disk.
4. Using pliers and wire cutters, prepare 30 “U”-shaped fastening brackets from paper clips in sizes 6-8 mm - 10 mm - 6-8 mm.
5. Assemble the lamp. To do this, insert staples into the holes and bend them inward with pliers. There is no need to tighten the brackets too tightly, as the discs should fit loosely on the brackets.
6. After the first 5 disks are installed, insert the light bulb into the socket. Its power should not exceed 25 watts.
7. Attach the remaining disks and hang the lamp in the desired location.

Original hot stand

Online and offline stores are overflowing with all kinds of hot coasters. Such stands will be useful not only at home while watching your favorite movie, but also at work. And you don’t have to buy a finished product, because it’s easy and quick to make with your own hands.

To do this you will need:

Progress:

1. Trace the disk on cardboard and cut out a circle.
2. Insert cardboard between the discs and glue them together.
3. Place the resulting workpiece into a file and place under a press for 2-3 hours.
4. After the glue has dried, coat the edges and middle of the workpiece with putty.
5. Treat the surface of the skin after the putty has dried and apply paint in two layers. Be sure to dry the surface of the product before applying the second layer.
6. Glue napkins onto both sides of the workpiece with PVA glue.
7. Cut off excess napkins using sandpaper.
8. Paint the ends of the product with paint to match the color of the drawing on the napkin and varnish the finished product. After the coating has completely dried, the stand is ready for use.

Candlestick made from CD

A hand-made candlestick will create a romantic atmosphere in the room. This decoration can be decorated to your liking. The version below used small sea pebbles and shells.

Before you get started, you need to stock up on:

Step-by-step operating instructions:

1. Place a candle in the center of the disk on the desired side and circle it with a marker.
2. Using glue, glue pebbles and shells. It is important not to violate the border of the circled circle.
3. Cover the surface of the pebbles and shells with acrylic paints or varnish after the glue has dried.
4. Place the candle in the circle designated for it in advance.

Disc curtain

If the CD is not a couple of pieces, but a lot, then you can make an original curtain. This DIY CD craft will look perfect in your dacha.

For curtains you need:

Step-by-step instructions for making LED curtains:

1. Arrange the discs in the order in which they will be located in the future curtain.
2. Use a marker to mark the locations of future holes.
3. Stack several discs and drill holes at the lowest speed.
4. Using paper clips, combine the disks into chains, threading the paper clips into the holes made.
5. Combine the finished chains, also using paper clips, into a sheet.
6. Hang the finished curtain in the desired location.

Mirror mosaic: crafts from broken disks

Do-it-yourself CD crafts mainly use whole products. But if the disk breaks while working on the product, there is no need to throw it away, as it can become the basis for a wonderful mirror mosaic.

Disc mosaics can easily be used to decorate almost all items in the interior - a photo frame, a chandelier, and even a work surface in the kitchen.

For the mosaic you will need:

Master class on working with mosaics from CDs:

1. Before starting work, you need to select a drawing and cut it into elements. The parts of the mosaic in it should not be long and sharp, or round, since such elements are difficult to cut out of the disk and are easy to break.
2. Attach the elements of the future mosaic to the disk and circle it with a marker.
3. Heat sharp scissors and cut out the elements drawn on the disks. You need to wear gloves and goggles to carry out this work, as you can easily get burns, cuts, or injure your eyes from a flying piece of the cut out disk.
4. Erase marker marks on the cut-out parts with acetone and glue them to the surface to be decorated using a large amount of glue.
5. Dilute the grout and use a spatula or a piece of thick cardboard to rub it into the seams.

Step-by-step instructions: mosaic for a flower pot

An old flower pot can be updated quickly and easily using discs.

To work you will need:

When decorating a pot with a mosaic, you can use both the technique discussed above and the one proposed below. In both options, it is important to protect your hands and eyes before working.

Sequencing:

1. Cut discs into arbitrary sizes and shapes.
2. Apply glue to the pot and glue the elements of the future mosaic. After the mosaic is ready, you need to leave the pot for a couple of hours for the glue to dry.
3. Using a thin brush, apply paint between the cracks in the mosaic and leave to dry again.

Napkin holder made from discs

A napkin holder is one of the wonderful DIY disc crafts that will allow you to decorate your kitchen.

For the product you will need:

Progress:

1. First, prepare the sides of the napkin holder. Determine the height of the future napkin holder, apply a ruler to the excess part, it will need to be cut off. Run a knife along the ruler several times and, when the cut on the disk becomes deeper, break it. Cut off the excess part on the 2nd disk in the same way.
2. Take two circles, larger in diameter than the middle of the disks, and glue them on the side that will be the wrong side.
3. On the 3rd disk, mark the width of the napkin holder and cut off the edges.
4. Glue the napkins onto the discs and cut off the excess from the edges. After the glue has dried, you need to coat the elements of the product with varnish.
5. Assemble the napkin holder - insert the first 2 disks along the edges of the 3rd one. To do this, make cuts on the 3rd disk with a hot knife, nail or jigsaw. It is important to protect your face, hands and work surface before work.

Stand for pens and pencils

Such a simple craft will definitely become useful in the household.

For it you will need:

Sequence of work:

1. Trace the disk on cardboard, cut it out and glue it onto the disk.
2. On the remaining disks, use a compass to draw a circle of the same diameter. Cut this circle out of the disk using a hot nail or other method. It is important to protect your hands and face.
3. Place the discs on top of each other and drill holes for the bolt and nuts. Fasten the disks.
4. Cut a sheet of plastic bottle to fit inside the stand and insert it.

Photo frame from disk

A photo frame is a great original craft for beginners.

Before you start working, you need to prepare:

Progress:

1. To begin, place the disk on the back of the photo and trace a circle, and then cut out the photo in a circle.
2. Using a heated thick needle or mini-drill, drill a hole.
3. String beads and beads onto a thread to your liking. Fold the resulting decoration in two and insert the suction cup into the resulting loop.
4. Glue the decoration to the disk on one side and the photo on the other.

The frame with the photo is ready, all that remains is to find a place for it in the interior.

Pincushion made from CD discs

All of the DIY crafts discussed use large disks. The exception is the pincushion, as it is made from a small disk.

To work you need to take:

• small disk;
• velvet;
• ribbons;
• needle and thread;
• glue;
• compass;
• filler - cotton wool or padding polyester.

Sequencing:

1. Twist roses from ribbons for decoration and cut leaves from fabric.
2. Trace the disc onto the velvet and cut it out with an allowance of 6-7 cm. Sew the edge.
3. Place some padding polyester under the stitched edge and sew up the hole.
4. Using a compass, draw a circle on the fabric with a smaller diameter and an allowance of 5 cm. Cut out the circle, sew along the edge, fill with padding polyester, tighten and sew up the hole.
5. Glue or sew parts.
6. Cut the ribbon, burn the edges, wrap it around the seam, tie it in a knot, and glue the edges of the ribbon to the brim of the hat. Glue roses and leaves to the ribbon.

Clock from an old computer disk

Many women dream of decorating their home with a unique and useful thing. If you have an old clock with a working mechanism at home, you can make an interesting decoration for the kitchen or room.

The following will be useful for work:

Step-by-step instructions for making a watch:

1. Trace the disk along with the hole on cardboard and construction paper of the desired color, and then cut out the circles.
2. Glue the circles together using cardboard + disk + cardboard + disk.
3. After the glue has dried, glue colored paper onto the cardboard with double-sided tape, and numbers on top of the paper. These can be either printed numbers or made by yourself.
4. Install the mechanism through the hole on one side and attach the arrows on the other. Insert battery.

These battery-free watches can be used to teach children time.

Crafts from disks for children in kindergarten

Often in kindergarten they are given the task of making all kinds of crafts with their own hands. One of these could be a picture on a disk drawn with plasticine figures. This composition is not only beautiful, but also useful, as it develops fine motor skills of the hands.

For the painting you will need:

Sequence of work:

1. Cut a circle of cardboard and stick it to the back of the disk with double-sided tape.
2. Before you sculpt a picture, you need to choose a subject. The painting described in the master class is a landscape after rain. First you need to take a piece of blue plasticine, heat it and spread it evenly over the surface of the disk.
3. Draw a horizon line in the lower third of the blue background.
4. Roll 7 strips of red, orange, yellow, green, blue, indigo and violet and stick them to each other, and then fold them in an arc.
5. Make a sun with rays and two clouds.
6. Make an uneven semicircle from green plasticine and stick it on the lower third of the disk - this is grass.
7. Stick a rainbow above the grass, and above the rainbow - the sun with rays and a cloud.
8. Attach a magnet or rope to the back with double-sided tape.

Master class with children: fish from a CD

A handmade fish will be an excellent decoration for a child’s room or a gift, since you can write wishes on the back side.

Necessary materials:

Progress:

1. First you need to draw a fish and several algae of different lengths with a simple pencil. To make the future product look harmonious on the disk, it is better to draw a fish over a large area of ​​the disk.
2. Trace the outline of the disk twice on blue or blue cardstock and cut it out.
3. Glue the cut out circle onto the shiny side of the disk and the fish and seaweed on top.
4. Color the fish and algae with pieces of plasticine, pressing it into the drawing.
5. Another option for decorating a fish is velvet paper. In this case, draw a fish on thick cardboard and carefully cut it into pieces - head, body and fins. Trace each part on multi-colored velvet paper and glue it to the disk. Trace the algae on green paper, cut it out and glue it under the fish.
6. Glue the second cut out circle on the back side and write wishes with felt-tip pens.

DIY animals made from CDs

Children love animals, if you want to spend creative time with your baby, but there are no interesting ideas, try making an animal from a disk. It's easy and quick, and the finished product can be glued to the refrigerator using a magnet.

To start, prepare:

• 2 disks;
• colored paper;
• magnet;
• glue;
• paint or marker.

Sequencing:

1. Draw a sheep's head and two paws on black paper. Draw eyes on the head - 2 white circles with pupils.
2. Trace the disk on white paper, cut out a circle and glue it to the disk. Draw curls on it like on a lamb's wool.
3. Glue the head in the middle, and the paws and magnet on the back side.

A ladybug is another interesting craft that a child will find very interesting to make.

You will need the same tools for it as for the sheep.

Performance:

1. Trace the outline of the disk twice - on black and white paper and cut it out.
2. Glue black paper onto the disk.
3. Cut the red circle into two even parts, glue it to the black one in the shape of open wings, stepping back 2-3 cm from the edge of the disk.
4. Cut out 10-12 identical circles from black paper and symmetrically stick 5-6 pieces on each wing.
5. Draw eyes on the edge. They can also be made from paper - glue two black ones, smaller in diameter, onto two white circles.

Crafts from disks for the garden

Crafts made from discs will be an excellent decoration for your garden. If you have time and the necessary materials, you can make interesting products with your own hands. Moreover, these will not just be trinkets, but practical things. For example, a scarecrow in the form of an owl will help keep the harvest intact.

For it you will need:

Progress:

1. Cut the edges of 4 disks into fringes.
2. On the new disk, cut out the eyebrows, beak and ears of the owl.
3. Glue 2 disks with fringe together, placing one on top of the other. This is the head of an owl.
4. Cut out 2 identical circles from colored paper and draw pupils on them and glue them to the head.
5. Glue the other 2 discs with fringe to the head. The finished owl can be glued or hung on a tree.

What else can you make from computer disks?

A wonderful box of disks will help you carefully store little things or jewelry that are dear to your heart - rings, earrings or chains.

For the product you will need:

Step-by-step instructions for making a box from CDs:

1. Cut a circle from the fabric with an allowance of 2 cm, on which you need to make cuts.
2. Apply glue to the seam allowance and glue it to the disc. Do the same with the remaining disks.
3. Place the 2 discs together with the fabric facing out and sew or glue them together.
4. Cut a wide strip of cardboard 8-10 cm long + 2 cm for allowance.
5. Cut the allowance into triangles.
6. Cut a strip of fabric twice as wide as the cardboard strip. Glue the fabric onto the cardboard, not taking into account the allowance.
7. Lubricate the allowance with glue and glue it to the disk. In order to hide the allowance, you can insert another disk inside.
8. Decorate the lid to your liking and place on top.

Drawing on CDs

The disc can become a canvas for various designs. For example, stained glass painting.

Before work you need to prepare:

Sequencing:

1. Paint the disc with black acrylic paint.
2. Apply a pattern to the disc and then use a toothpick to remove the paint.
3. Add dots along the edges of the pattern.

Decoupage of CDs

A disk decorated using the decoupage technique can become a decoration in any interior.

To work you will need:

How to work with a disc using the decoupage technique for beginners:

1. Cut a circle out of cardboard that is the same diameter as the disk.
2. Treat the surface of the disc with alcohol and stick the circle onto the disc.
3. Wet the napkin, leave it aside to drain excess moisture, and then place it on the disc. Apply PVA glue to the napkin.
4. Glue a cord or magnet to the back side. The painting using decoupage technique is ready.

Crafts from CDs are a way to give a second life to unnecessary things and create an exclusive item with your own hands. The master classes discussed do not take much time and consist of simple materials that are easy to purchase.

Video: crafts from disks

Interesting crafts made from CDs in the video:

Many options for crafts from CDs in the video:

Every PC user can find a couple of unnecessary disks at home. Don’t rush to throw them away, because in the hands of a master, even the most unnecessary thing can turn into a necessary one. We offer you several master classes on how to make original crafts for the home from CDs and DVDs.

Materials:
— 3 disks;
- glue gun;
- beads;
- scissors.

1. One of the disks will serve as the base, and the other two will form a napkin holder.
2. At a distance of less than half, measure a straight line on 2 disks and carefully cut with scissors.

3. Using a glue gun, glue the cut discs onto the third base disc. You can adjust the distance yourself, it all depends on the number of napkins that the napkin holder will hold.
4. After the glue has dried a little, start decorating the napkin holder. For this you can use beads, seed beads or ribbons. You can glue them in any order.

Interiors decorated with exclusive items have become increasingly popular in recent years, so we suggest making a creative photo frame.

Materials:
- beads and seed beads;
- disk;
- drill or thick needle;
- threads;
- suction cup;
- photo.

1. Drill a hole in the disk or make holes at the top and bottom of the disk.
2. Now make a decoration from threads and beads, to which you attach a suction cup. Another decoration can be made from threads folded several times.
3. Attach the decorations to the disc.

4. Select a photo to fit the round frame. Cut it into a disk shape.
5. You can stick the photo with glue or double-sided tape. In the latter case, the photo can be changed over time. Instead of a photo, you can use a beautiful picture, and thread decoration can be replaced with ribbons. It all depends on your imagination.

Materials:
- CD;
- shells;
- glue;
- candle.

1. Select suitable pebbles and shells for the candlestick. Glue them to the shiny side of the disk. For gluing, you can use a glue gun or Moment glue.

2. You must leave some free space in the center for a candle.
3. You can paint stones and shells with acrylic paints or varnish them.
An original candlestick will create a romantic atmosphere in the room and give a second life to unnecessary items.

Ideas for children's crafts will be useful to teachers in children's institutions, as well as for parents. A fish craft made from CDs will help decorate your interior in an original way, and it can also be used as a postcard. Using simple materials, you can make a fish from discs even with a 3-year-old child.

Materials:
- disk;
- glue;
- colored cardboard;
- scissors;
- plasticine;
- felt-tip pens.

1. On a sheet of cardboard you need to draw the fins, tail and mouth of a fish.
2. Carefully cut out all the parts. If the child is small, it is better for the mother to cut out the details.
3. Using PVA, glue the parts of the fish onto the disk.

4. Now the surface of the disk needs to be covered with plasticine using the indentation method.
5. Cut out the fish’s eyes from cardboard and secure them.
6. Make plasticine eyelashes.
The fish is ready. If you want to give it as a gift, you can write wishes on the tail or fins.

A hot stand is an indispensable item in the kitchen, and making it with your own hands is quite simple from ordinary materials.

You will need:
- disk;
- padding polyester;
- double-sided tape;
- textile;
- scissors.

1. From padding polyester, you need to cut a circle to the size of the disk.
2. From the fabric you need to cut a circle with a larger diameter than the disk.

3. Place double-sided tape along the edge of the fabric. Wrap the disc and it with cloth and padding polyester.
The beautiful stand is ready, now you can put a cup of tea or coffee on it.

Original cup stand

A cute coaster for a cup will become a real decoration and.

Materials for the stand:
- disk;
- scissors;
- napkin for decoupage;
- varnish;
- PVA glue;
- flex.

1. Separate the top layer from the napkin so that only the drawing remains in your hands.
2. Apply PVA to the surface of the disk and carefully glue a napkin on top so that there are no wrinkles. You can smooth the napkin with a cotton pad or pieces of napkin soaked in PVA.
3. Cut a circle with the diameter of a CD from a sheet of flexi paper.

4. Glue the flexi to the side of the disk where there is no napkin. Thanks to flex, your stand will not slide on the table.
5. Coat the craft with varnish to give it a pleasant shine and additional strength.

Materials:
- disk;
- a glass of sour cream or yogurt;
- threads;
- needle;
- padding polyester;
- textile;
- ribbon.

1. Cut a circle out of fabric, slightly larger than the diameter of the disk. Sew along the edge with a basting stitch.
2. Fill the fabric with padding polyester, insert the disk and tighten slightly.

3. Cut off the bottom of the sour cream cup. Cut a circle of fabric so that it covers the cup. Fill the glass with padding polyester.
4. Start sewing the parts together to form a hat.
5. Decorate the seam with ribbon or braid.
The pincushion in the shape of a hat is ready.

The image of Smeshariki from the cartoon of the same name is reflected in different types of needlework. Today you will learn how to make smeshariki from CDs.

Materials:
— old disks;
- glue;
- colored cardboard;
- colored paper;
- scissors.

In order to make any cartoon character, be it Nyusha, Krosh or Sovunya, you need to cut out eyes, ears, arms, legs from colored paper or cardboard.
Ideas can be taken from regular coloring books and used as a template. To make Smeshariki’s facial features clearer, outline the contours with felt-tip pens.
All elements can be easily glued with PVA or double-sided tape.

Alla Kopchinskaya

New Year's garland of disks

Master Class. Decoupage discs

Master class “Garland of disks”

Purpose:

interior design and creating a festive mood

Target:

development of creative abilities among teachers and parents

This is the garland I got:

We have to:

1. Old disks (new ones are possible)

2. paper napkins with a New Year theme

3. any white paint (I used water-based paint)

4. 2 brushes (for paint and glue)

5. PVA glue

7. varnish (can be for furniture, can be for cars)

8. satin ribbons 0.5 cm wide

9. bows for decoration

Step-by-step production:

Step 1 – take the disc and cover it with white paint

Step 2 – glue a white circle cut out of paper onto the middle of the disk (close the hole, let it dry

Step 3 – paint the circle with white paint

Step 4 – dilute the PVA glue with a little water so that it is not very thick

Step 5 – separate the napkin from the second layer, if there is one

Step 6 – place a napkin on the disk and cover the top with PVA glue diluted with water (it is better to apply the glue from the center to the edges)

Step 7 – immediately, while the napkin is damp, tear off the edges

Step 8 – brush along the edge of the disk with glue, let the disk dry

Step 9 – coat the disc with varnish (this disc can also be used outdoors to decorate the pavilion)

Step 10 – if you want to “snow” the rims, you can sprinkle some places with fine salt while the varnish is still wet

Step 11 - using the same principle, we make the required number of disks, make holes at the top and bottom (you can use a drill, you can use a hot nail or an awl)

Step 12 – string the disc onto a satin ribbon

Step 13 – string the required number of disks

This is how it turned out for me:

Step 14 – decorate the resulting garland with bows

Step 15 – hang the resulting garlands

You can decorate the New Year's garland with lights and enjoy the beauty!

Progress in our era is advancing by leaps and bounds. So CDs were not used for long as the main storage medium. Now we use them for their intended purpose very rarely, or don’t use them at all. But CDs are very suitable as a basis for creating a variety of crafts.

On these pages you can easily verify this. Lots of step-by-step master classes on various crafts, including gift items, illustrated with photographs; ideas for creating a tabletop theater from disks are collected for you in this section.

Creative "discography" of MAAM - for creating original crafts.

Showing publications 1-10 of 225.
All sections | Disks. Crafts from CDs

New Year's toy from CD - disks using decoupage technique. "New Year's Magic" Senior group "Droplet" New Year is the most long-awaited holiday. Many people love winter because of this holiday. All people are waiting for New Year's magic. Each family decorates their home with colored ribbons and...

Scenario of the New Year's party "Disk of Santa Claus" for the preparatory group « Santa Claus disk» Children enter the hall to the song and perform a dance according to the lyrics of the song. Ved: Hello children! Hello, dear guests! Happy New Year! May the New Year that we celebrate enter our lives as a Happy Year! And all the good things about...

Disks. Crafts from CDs - Didactic game for speech development “Magic Discs”

Publication “Didactic game for speech development “Magic...” This benefit can be used by two children at the same time. In this case, one child rotates the circle on the left, installs his picture, the second child rotates the circle on the right and installs a suitable picture in the diamond-shaped window, reasoning and agreeing with each other...

Image library "MAAM-pictures"

Master class on making a craft “Butterfly on a daisy” from a disk Craft “Butterfly on a Daisy” (for the garden) For work we will need: 1. 3 CDs; 2. 13 plastic disposable spoons; 3. 1 plastic stick (I had one with a suction cup); 4. Glue “Titan”; 5. Scissors; 6. Yellow colored paper; 7. Colored cardboard for the butterfly. 1 step...

Purpose of the lesson: - making appliqué from waste material. Objectives: - continue to develop the ability to cut blanks from colored paper using ready-made templates; - consolidate the ability to compose a whole object from several parts, carefully glue applique details, finish...

Making crafts from waste materials is a very interesting and useful activity for children. Waste material is available and varied. And also waste material develops children's imagination and imagination. These are the crafts we made with my new children “The Bottom of the Sea” For this...

Disks. Crafts from CDs - Lesson notes on the application “Flowers on a disk”

Topic: Application “Flowers on a disk” Goal (age 3-7 years): making an application from finished parts. Goal (age 8-10 years): making appliqué using templates. Goal (ages 11-18): compose your own composition. Equipment: scissors, glue, discs, colored felt, colored...

The wonderful summer time has come, when children spend most of their time outdoors, and many educators are faced with the question of how to make the surrounding space on the playground and verandas beautiful. I bring to your attention, dear colleagues, a master class on...

Art constantly requires new forms. Today, paintings in classic frames may seem too old-fashioned for modern interior solutions. Use pop art techniques, finding beauty in the familiar. Make a three-dimensional composition from CD boxes.

The emergence of new storage media has negated the benefits of CDs. Today, music can be listened to online or recorded on devices that take up much less space. Therefore, discs are often sent to scrap. Plastic boxes from them too. But you can use them by making wall decorations.

Take out the CD cover. Usually it is a piece of glossy paper or a small book. This sheet will be used as a sample.

Print an image that will fit the size of several covers stacked together.

Mark squares on the back of the picture to fit the size of the cover.

It is convenient to use a long ruler.

Cut the image into squares. Use a sharp cutter, or very sharp tailor's scissors with straight blades.

Place each piece in a CD case.

Attach Velcro or pieces of double-sided tape to the second part.

Using a large ruler, mark the section of the wall where the painting will be attached. Construct two perpendicular axes.

Start gluing the image elements.

Between rows, leave a distance equal to the space on the side of the disk.

You can use part of one of the boxes as a stencil.

Collect the entire image. Any photo will look more impressive in this design.

cpykami.ru

What can be made from disks? Crafts from CD (photo)

Surely every home has already accumulated a fair amount old CDs. All sorts of outdated programs, uninteresting films and simply unreadable discs (scratched, unformatted and out of order). But at the same time, they are so shiny, of a regular round shape, that it’s simply a pity to throw them away. So what is possible make from CDs?

Pavel Polyakov offers a simple option that everyone can do, regardless of age and financial situation. This is about cup stand from coffee beans. It will protect your furniture from thermal overheating and fill your home with the pleasant smell of coffee beans.

For this craft we will need a beautiful and clean CD or DVD disc, any glue for plastic or leather, about 50 grams of coffee beans and a little patience.

So, about all the steps in turn.

1. Take the disk and apply glue to it, about one third of the disk. This is no longer necessary, since the glue dries quickly, and we must tamp the grains into the glue very well. The glue must be applied in a fairly thick layer.
2. Wait about a minute and rub the glue on the surface of the disk.

3. Pour out the grains and quickly begin to glue them to the disk, leveling them and creating a composition of grains.
4. We repeat these procedures on the surface of the entire disk, I remind you that you should not rush - pour glue onto no more than a third of the disk, wait about a minute and press the grains firmly.

As a result, we get such a disc, quite beautiful and smelling nice.

And together with a cup of coffee it looks like this.

From operational problems, it became clear that the grains in the center of the disk must be placed very evenly, otherwise the cup will wobble and there is a risk of it turning over. So I immediately removed the beans from the center of the disk, under this particular cup. And the cup immediately acquired increased stability, and the product acquired a finished look!

This is such a beauty!
As an addition, along the edge of the disk you can lay out a edging of dried rose hips or beautiful shells. You just need to be smart.

Another video tutorial about similar stands, but decorated with plastic flowers:

- The discs are simply decorated(pasted, sheathed, tied) sometimes to such an extent that it is not even clear why a CD is needed at the base, that is, it is the same ordinary element as a flat round part made of any other material.

In crafts it is done emphasis on the mirror surface of the disc, then the effect is more interesting.

We also have several interesting master classes on our website:

Doll stand

Victoria Golden. Lamp made from disks “Fairytale Bird”.

Craft from CDs “Teddy Bear“.

Crocodile from disks:

Vase from Yulia Eliseeva's discs:

Clock made from records and CDs:

More works submitted to our contest “Plastic Crafts”:

Christmas tree made of disks:

Works of the competition “Second Life of Things”:

Did you like the product and want to order the same from the author? Write to us here.

Promo code - podelkidoma - for a 10% discount!

More interesting:

See also:

Tags: Crafts from waste materials

podelki-doma.ru

DIY crafts from CDs and DVDs, for home, photo ideas

Almost every person has a couple of unnecessary CDs, DWDs, CDs that are simply scratched, stale and no longer needed. Don’t rush to throw them away because you can use them to make useful crafts for the home, such as: a napkin holder, a photo frame, a candlestick, a hot stand, a pincushion, and even children’s crafts like fish and smeshariki. In this article we will look at how to make crafts for the home from old CDs, DWDs, CDs with your own hands.

Napkin holder made from discs

You will need: three discs, glue gun, scissors, decorative elements (beads, beads, ribbons) ...

Master Class

1. Take two disks, cut off 25% of each disk in a straight line.
2. Take a whole disk that will serve as the base of the napkin holder.
3. Glue the cut disks on both sides to the base so that they act as holders.
4. Wait until completely dry.
5. Decorate to your taste.

Photo frame from disk

You will need: disk, photo, threads, glue, decorative elements (beads, seed beads, ribbons) ...

Master Class

1. Make a decoration from threads or ribbons, folding them several times.
2. Glue the decoration to the disk.
3. Cut the photo into a disk shape.
4. Glue it to the disk.
5. Decorate to your taste and hang it in the right place.

Let's consider another option for creating a photo frame from disks!

Photo frame made from disk fragments

You will need: 2 discs, glue, black stained glass paint with a fine tip, thick cardboard, scissors.

Master Class

1. Cut out a cardboard frame of the desired size.
2. Cut the disks into pieces.
3. Glue the disc pieces to the frame, leaving small gaps.
4. Color in the spaces.

Candlestick made of disk and shells

You will need: disk, shells, pebbles, glue gun or glue moment.

Master Class

1. Take the disk.
2. Glue shells and pebbles to the shiny side of the disk.
3. Leave room for a candle in the center.

Disc hot tray

You will need: disk, padding polyester, fabric, scissors, double-sided tape.

Master Class

1. Cut a circle of padding polyester in the shape of a disk.
2. Cut a circle of fabric 1.5 times larger than the disk.
3. Place a circle of padding polyester on the disk.
4. Attach double-sided tape to the edges of the fabric circle.
5. Wrap the disc with padding polyester in a circle of fabric, and secure the edges of the fabric on the reverse side.

Hot stand made from a disk using decoupage technique

Decoupage is a method of decorating objects.

You will need: disk, napkin with a pattern, scissors, PVA glue, varnish, sheet of flexi (so that the stand does not slide on the table).

Master Class

Disk pincushion

You will need: disk, glass of yoghurt-fermented baked milk-sour cream, thread with a needle, ribbon, fabric, padding polyester.

Master Class

Disc fish

You will need: disk, colored cardboard, scissors, glue, markers, plasticine.

Master Class

Smeshariki from disks

You will need: discs, colored cardboard, PVA glue or double-sided tape, a simple pencil, scissors, felt-tip pens.

Master Class

1. Draw ears, eyes, mouth, teeth, nose, legs and arms on colored cardboard.
2. Trace the outlines of the parts with felt-tip pens.
3. Cut out the pieces.
4. Glue it onto the disk.

Crafts made from disks will not only become an original decoration for your home, but will also be practical to use!

svoimirukamy.com

What can you make from CD packaging?

In this video, the authors of the TV show will talk about what can be done from unnecessary CD packaging. Many computer users probably already have a lot of unnecessary junk at home, including disc boxes. Each of these boxes can be given a new function. It is proposed to use them to make containers for food and other things.

Using a hacksaw, you first need to cut off the protrusion at the bottom of the case. By the way, you don’t have to use a hacksaw for this, because very little work will be required. Therefore, you can simply use a hacksaw blade.

Photo frames from CD boxes

The simplest thing you can make from CD boxes is, of course, photo frames. They can be hung on the wall, or placed on a table or shelf. To prevent them from looking ordinary, you can decorate the contours of the “frames” by making an appliqué or painting them, for example, with stained glass paints.

You can make lamps from such boxes, again I would paint them for beauty.

For gardeners, the boxes can be useful for creating a kind of “greenhouse”.

It is also an excellent material for making various organizers, for sewing, for example, or for stationery items. You can sort and store recipes, notes, and so on using them.

Lamp made from CD packaging

You can make a cute night light or lamp from old and unnecessary plastic boxes from CDs and DVDs:

Or this chandelier:

An original and stylish table lamp or night light, but be sure to use low-current or LED bulbs.

izobreteniya.net

120 photo ideas and master classes from the pros!

Most people have a large amount of unwanted or unusable CDs accumulated in their home.

You can simply throw them away. But it’s better to use them to create various crafts and interesting things. In this article we will tell you what fakes you can make from disks with your own hands.

Roof covering

If you have a lot of CDs, they can be used as an original sparkling roofing covering. To do this, first the disks are attached to plywood sheets, and they, in turn, are attached to the roof. Approximately a hundred discs are needed for 1 m² of coverage.

They need to be attached as follows: 1st row - end-to-end, subsequent ones - in a checkerboard pattern, overlapping the disk holes of the 1st row. Small nails or screws can be used as fasteners.

Come up with a drawing, following which you will begin to make the roof. If you don’t have enough material, then you can only lay out the visor with it.

Fake discs for the garden

British artist B. Monroe, known all over the world for his light installations, decorated his garden area with stylized water lilies from CDs.

It took him 65 thousand CDs to create this work of art. You can take Monroe's idea as a basis and make these miniature lilies to decorate your own garden.

The discs can be used for the tail of a homemade peacock. They are attached to the metal frame of the tail using wire.

The disks can also make cute fish. To make one piece, you only need a couple of disks and multi-colored cardboard or a sheet of plastic.

The latter are used to make fins, tail and fish mouth. The cut out elements should be placed between the discs and carefully glued.

The disc caterpillar looks unusual and interesting. It will require several disks fastened together with screws. The legs can be made of rubber, plastic, plywood, and threads can be used for the mouth, eyes and hair. This craft is attached to the fence with wire.

Another option for using disks is the creation of street lighting fixtures.

Crafts from disks for children

Interesting ideas for children's crafts made from CDs will be useful for educators, primary school teachers, mothers and fathers.

The disk can be used to create a beautiful postcard in the shape of a fish. This craft can be done even by three-year-olds. They can easily cope with it under the supervision of their parents. In addition to the disk, you will need PVA glue, scissors, plasticine, markers and multi-colored cardboard.

Fins, a tail, and a mouth cut out of cardboard must be carefully glued onto a CD, onto which plasticine must then be applied using the indentation technique. The next step is to make the eyes.

For this we use cardboard. After you have attached the eyes to the fish, you can make eyelashes from plasticine. The tail and fins are used to write congratulations.

From damaged CDs, using glue, multi-colored cardboard and colored paper, you can make Smeshariki, the popular heroes of the cartoon of the same name.

For beauty, the contours of figures, eyes, and mouth can be outlined with a marker. Such decorations are easily attached to a wall or cabinet using glue or double-sided adhesive tape.

Interesting gizmos from CDs for the home

From discs you can create original curtains that do not require washing. The following materials are needed: disks, paper clips, drill.

Small holes are drilled into the edges of the disks with a drill, and paper clips are used to connect them to each other. The number of discs, size and shape of the curtain depend on your imagination.

Curtain holders in the bathroom made from unnecessary disks will look great.

The discs can also be used to create unusual and interesting kanzashi-shaped curtain ties. And you can secure them with Chinese chopsticks.

To make a pick-up, you need to cut a circle of smaller diameter from the disk. Wrap the resulting ring with satin or silk ribbons. You can use flowers made from ribbons as decoration; below are photos of crafts made from discs.

Disks can be used to make candlesticks, boxes, stands, needle cases and much more. Therefore, you should not rush to get rid of outdated CDs. With their help, you can sometimes create truly unique things.

Photos of crafts made from disks

datahomes.ru

Bookshelf made from DVD boxes by Andrey Volkov

You will need: boxes from DVD, bolts and nuts, paint,
board, drill.

1. The first step is to connect 5 DVD boxes
bolts with nuts. Let's drill through the entire block in the corners with a drill.

Please pay Attention: the discs must be folded in such a way that
The bottoms of the boxes with DVD mounts turned out to be free at the top and bottom! These
No need to drill parts!

2. The first block is ready - to make a shelf you will need
another one the same. Discs made of two free elements with fastenings can not be
take out.

Andrey Volkov: « Firstly, it is beautiful. And secondly,
technological progress may fail, and we will again have to use
DVD player."

3. The blocks for the shelf should have two “wings” -
flaps on which it will be attached to the wall. The shelf itself will be from
pine boards. To prevent it from being too boring, it needs to be painted.

4. We fix the painted board using self-tapping screws.

5. The shelf is ready - all that remains is to fix it on the wall.

www.peredelka.tv

Crafts from disks: Top 25 original ideas

We looked at crafts made from plastic bottles (and probably used some of them), we were surprised at crafts made from cans and planned to make something of our own on the go, and today we have crafts from disks next in line. Old disks - once they seemed almost magical... To some extent, they remain magical, but in a completely different sense - now you need to apply attention and a little skill to them in order to turn them into various crafts and things - functional and/or funny.

Functional and useful crafts made from disks

Coasters made from old CDs

Just paint old CDs or make a complex heat-insulating structure? It all depends on the destination. By following the link to the source, you can roughly understand what the essence of the technological process is in both cases.

Source

The best New Year and Christmas books for children

Source

Candlestick from an old CD

From an old disk you can make a very avant-garde thing to put a traditional candle - a candlestick in the house or in the country, which is rarely superfluous.

Source

Crafts from CDs: DIY vase

Such a cute vase does not require much effort, but can become a cute decorative element.

Source

Lamps made from disks

With the help of the interior you can say a lot about yourself. It’s unlikely that such a lamp will decorate Barbie’s room, is it?

Source

Mosaic frame made from old disks for a photo or picture

A strong item like a CD cannot be easily broken. Unless there is a worthy goal. 🙂

Source

Mirror from an old CD

In the room of Thumbelina (or another girl), a small mirror may well be useful: for beauty and sunbeams.

Source

Disk jewelry stand

Do you have a lot of earrings and are they all mixed up in the box? Then this idea is for you - each earring can be carefully hung in its place on such a jewelry stand.

Source

Decorative crafts from disks

Holiday CD decorations (New Year, birthday, before the party)

Making such crafts for the holiday can be not only a fun, but also a developing process. With brilliant results!

Source

Source

Source

Clock from an old CD

Even if such a clock does not run, it will always remind you that there is time. Or not?

Source

What can you make from CDs with your children?

Funny and uncomplicated - probably the crafts from disks collected below are united according to these characteristics. The main thing is to start tinkering, and out of nowhere, a lot of ideas will come, and you can play with the results together! And smile while looking at them too.

Various CD creatures

Source

Source

Source

Source

Source

Source

Source

Decorative box made of discs

Source

Photo frame with magnet

This craft is offered as a gift for Mother’s Day, and you can make it together with your child.

Here's an idea for a whole photo album made from old CDs:

Source

Wind chime or reflector

Wind chimes can be hung in a country house or country house. After all, children love to watch the sunbeams, and here you can also hang a bell that will ring in the wind.